p11_kit_set_progname ()

void
p11_kit_set_progname (const char *progname);

Set the program base name that is used by the enable-in and disable-in module configuration options.

Normally this is automatically calculated from the program's argument list. You would usually call this before initializing p11-kit modules.

p11_kit_destroyer ()

void
(*p11_kit_destroyer) (void *data);

A callback called to free a resource.

p11_kit_iter_new ()

P11KitIter *
p11_kit_iter_new (P11KitUri *uri,
                  P11KitIterBehavior behavior);

Create a new PKCS#11 iterator for iterating over objects. Only objects that match the uri will be returned by the iterator. Relevant information in uri is copied, and you need not keep uri around.

If no uri is specified then the iterator will iterate over all objects, unless otherwise filtered.

p11_kit_iter_set_uri ()

void
p11_kit_iter_set_uri (P11KitIter *iter,
                      P11KitUri *uri);

Set the PKCS#11 uri for iterator. Only objects that match the uri will be returned by the iterator. Relevant information in uri is copied, and you need not keep uri around.

If no uri is specified then the iterator will iterate over all objects, unless otherwise filtered.

This function should be called at most once, and should be called before iterating begins.

p11_kit_iter_add_callback ()

void
p11_kit_iter_add_callback (P11KitIter *iter,
                           p11_kit_iter_callback callback,
                           void *callback_data,
                           p11_kit_destroyer callback_destroy);

Adds a callback to the iterator which will be called each time that an object is iterated.

These callbacks can also perform filtering. If any callback indicates through it's matches argument that the object should not match, then that object will not be iterated as far as p11_kit_iter_next() is concerned.

The callbacks will be called with the matches set to CK_TRUE and it's up to filters to change it to CK_FALSE when necessary.

p11_kit_iter_add_filter ()

void
p11_kit_iter_add_filter (P11KitIter *iter,
                         CK_ATTRIBUTE *matching,
                         CK_ULONG count);

Add a filter to limit the objects that the iterator iterates over.

Only objects matching the passed in attributes will be iterated. This function can be called multiple times.

The matching attributes are copied.

p11_kit_iter_callback ()

CK_RV
(*p11_kit_iter_callback) (P11KitIter *iter,
                          CK_BBOOL *matches,
                          void *data);

A callback setup with p11_kit_iter_add_callback(). This callback is called for each object iterated.

If the callback sets matches to CK_FALSE, then this object is skipped and not matched by p11_kit_iter_next(). If you return anything but CKR_OK, then the iteration is stopped, and p11_kit_iter_next() returns the result code.

p11_kit_iter_begin ()

void
p11_kit_iter_begin (P11KitIter *iter,
                    CK_FUNCTION_LIST_PTR *modules);

Begin iterating PKCS#11 objects in the given modules .

The modules arguments should be a null-terminated list of pointers to the modules' PKCS#11 function pointers.

For each module, all initialized slots will be iterated over, having sessions opened for each of them in turn, and searched for objects matching the search criteria.

p11_kit_iter_begin_with ()

void
p11_kit_iter_begin_with (P11KitIter *iter,
                         CK_FUNCTION_LIST_PTR module,
                         CK_SLOT_ID slot,
                         CK_SESSION_HANDLE session);

Begin iterating PKCS#11 objects in the given module .

If slot is non-zero then the iteration will be limited to that slot.

If session is non-zero then the iteration will be limited to objects visible through that session, which implies that they are also limited to the slot which the session was opened for.

p11_kit_iter_next ()

CK_RV
p11_kit_iter_next (P11KitIter *iter);

Iterate to the next matching object.

To access the object, session and so on, use the p11_kit_iter_get_object(), p11_kit_iter_get_session(), and p11_kit_iter_get_module() functions.

This call must only be called after either p11_kit_iter_begin() or p11_kit_iter_begin_with() have been called.

Objects which are skipped by callbacks will not be returned here as matching objects.

p11_kit_iter_get_kind ()

P11KitIterKind
p11_kit_iter_get_kind (P11KitIter *iter);

Get the kind of the current match (a module, slot, token, or an object).

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_get_module ()

CK_FUNCTION_LIST_PTR
p11_kit_iter_get_module (P11KitIter *iter);

Get the module function pointers for the current matching object.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_get_slot ()

CK_SLOT_ID
p11_kit_iter_get_slot (P11KitIter *iter);

Get the slot which the current matching object is on.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_get_slot_info ()

CK_SLOT_INFO *
p11_kit_iter_get_slot_info (P11KitIter *iter);

Get the slot info for the slot which the current matching object is on.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_get_token ()

CK_TOKEN_INFO *
p11_kit_iter_get_token (P11KitIter *iter);

Get the token info for the token which the current matching object is on.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_get_session ()

CK_SESSION_HANDLE
p11_kit_iter_get_session (P11KitIter *iter);

Get the session which the current matching object is accessible through.

This can only be called after p11_kit_iter_next() succeeds.

The session may be closed after the next p11_kit_iter_next() call unless p11_kit_iter_keep_session() is called.

p11_kit_iter_keep_session ()

CK_SESSION_HANDLE
p11_kit_iter_keep_session (P11KitIter *iter);

After calling this function the session open for iterating the current object will not be automatically closed by the iterator after later calls to p11_kit_iter_next() or p11_kit_iter_free().

It is the callers responsibility to close this session, after the iterator has been freed. The session may still be used by the iterator if further iterations are performed.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_get_object ()

CK_OBJECT_HANDLE
p11_kit_iter_get_object (P11KitIter *iter);

Get the current matching object.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_get_attributes ()

CK_RV
p11_kit_iter_get_attributes (P11KitIter *iter,
                             CK_ATTRIBUTE *template,
                             CK_ULONG count);

Get attributes for the current matching object.

This calls C_GetAttributeValue for the object currently iterated to. Return value and attribute memory behavior is identical to the PKCS#11 C_GetAttributeValue function.

You might choose to use p11_kit_iter_load_attributes() for a more helpful variant.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_load_attributes ()

CK_RV
p11_kit_iter_load_attributes (P11KitIter *iter,
                              CK_ATTRIBUTE *template,
                              CK_ULONG count);

Retrieve attributes for the current matching object.

Each attribute in the array will be filled in with the value of that attribute retrieved from the object. After use the attribute value memory pointed to by the pValue of each attribute should be freed with the free() function.

If the pValue of an attribute is not NULL passed to this function, then it will be passed to realloc() to allocate the correct amount of space for the attribute value.

If any attribute is not present on the object, or is sensitive and cannot be retrieved, then the pValue will be NULL. If pValue was not NULL when passed to this function then it will be freed with free(). In these cases CKR_OK is returned.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_destroy_object ()

CK_RV
p11_kit_iter_destroy_object (P11KitIter *iter);

Destroy the current matching object.

This can only be called after p11_kit_iter_next() succeeds.

p11_kit_iter_free ()

void
p11_kit_iter_free (P11KitIter *iter);

Frees the iterator and all resources, such as sessions or callbacks held by the iterator.

p11_kit_remote_serve_module ()

int
p11_kit_remote_serve_module (CK_FUNCTION_LIST *module,
                             int in_fd,
                             int out_fd);

Run a module on a given pair of input/output FDs.

p11_kit_remote_serve_token ()

int
p11_kit_remote_serve_token (CK_FUNCTION_LIST *module,
                            CK_TOKEN_INFO *token,
                            int in_fd,
                            int out_fd);

Run a token wrapped in a module on a given pair of input/output FDs.

p11_kit_remote_serve_tokens ()

int
p11_kit_remote_serve_tokens (const char **tokens,
                             size_t n_tokens,
                             CK_FUNCTION_LIST *provider,
                             int in_fd,
                             int out_fd);

Expose tokens on a given pair of input/output FDs. If provider is not NULL, all the tokens must be provided by the same module.

P11KitIter

Used to iterate over PKCS#11 objects, tokens, slots, and modules.

p11_kit_iter

enum P11KitIterKind

The kind of the current match.

enum P11KitIterBehavior

Various flags controlling the behavior of the iterator.