# translation of kcmaccess.po to Chinese Traditional
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006-2008, 2015.
# Jeff Huang <s8321414@gmail.com>, 2016.
# pan93412 <pan93412@gmail.com>, 2018, 2019.
# SPDX-FileCopyrightText: 2022, 2023, 2024 Kisaragi Hiu <mail@kisaragi-hiu.com>
msgid ""
msgstr ""
"Project-Id-Version: kcmaccess\n"
"Report-Msgid-Bugs-To: https://bugs.kde.org\n"
"POT-Creation-Date: 2024-08-29 00:41+0000\n"
"PO-Revision-Date: 2024-09-10 02:10+0900\n"
"Last-Translator: Kisaragi Hiu <mail@kisaragi-hiu.com>\n"
"Language-Team: Traditional Chinese <zh-l10n@lists.slat.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"dot tw>\n"
"X-Generator: Lokalize 24.08.0\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: kcmaccess.cpp:117
#, kde-format
msgid "AltGraph"
msgstr "AltGraph"

#: kcmaccess.cpp:119
#, kde-format
msgid "Hyper"
msgstr "Hyper"

#: kcmaccess.cpp:121
#, kde-format
msgid "Super"
msgstr "Super"

#: kcmaccess.cpp:131
#, kde-format
msgid "Press %1 while NumLock, CapsLock and ScrollLock are active"
msgstr "當數字鎖定、大寫鎖定和捲軸鎖定作用時按 %1"

#: kcmaccess.cpp:132
#, kde-format
msgid "Press %1 while CapsLock and ScrollLock are active"
msgstr "當大寫鎖定和捲軸鎖定作用時按 %1"

#: kcmaccess.cpp:133
#, kde-format
msgid "Press %1 while NumLock and ScrollLock are active"
msgstr "當數字鎖定和捲軸鎖定作用時按 %1"

#: kcmaccess.cpp:134
#, kde-format
msgid "Press %1 while ScrollLock is active"
msgstr "當捲軸鎖定作用時按 %1"

#: kcmaccess.cpp:135
#, kde-format
msgid "Press %1 while NumLock and CapsLock are active"
msgstr "當數字鎖定和大寫鎖定作用時按 %1"

#: kcmaccess.cpp:136
#, kde-format
msgid "Press %1 while CapsLock is active"
msgstr "當大寫鎖定作用時按 %1"

#: kcmaccess.cpp:137
#, kde-format
msgid "Press %1 while NumLock is active"
msgstr "當數字鎖定作用時按 %1"

#: kcmaccess.cpp:138
#, kde-format
msgid "Press %1"
msgstr "按 %1"

#: kcmaccess.cpp:192
#, kde-format
msgid "Could not set gsettings for Orca: \"%1\" failed"
msgstr "無法為 Orca: \"%1\" 設定 gsettings。"

#: kcmaccess.cpp:199
#, kde-format
msgid "Error: Could not launch \"orca --setup\""
msgstr "錯誤：無法執行「orca --setup」"

#. i18n: ectx: label, entry (Gestures), group (Keyboard)
#: kcmaccessibilityactivationgestures.kcfg:9
#, kde-format
msgid "Use Gestures"
msgstr "使用手勢"

#. i18n: ectx: label, entry (GestureConfirmation), group (Keyboard)
#: kcmaccessibilityactivationgestures.kcfg:13
#, kde-format
msgid "Ask for Confirmation for a gesture"
msgstr "使用手勢前詢問確認"

#. i18n: ectx: label, entry (KeyboardNotifyAccess), group (Keyboard)
#: kcmaccessibilityactivationgestures.kcfg:17
#, kde-format
msgid "Confirm access to the Keyboard"
msgstr "確認存取鍵盤"

#. i18n: ectx: label, entry (AccessXTimeout), group (Keyboard)
#: kcmaccessibilityactivationgestures.kcfg:21
#, kde-format
msgid "Use a timeout delay"
msgstr "使用逾時延遲"

#. i18n: ectx: label, entry (AccessXTimeoutDelay), group (Keyboard)
#: kcmaccessibilityactivationgestures.kcfg:25
#, kde-format
msgid "Delay for timeout"
msgstr "逾時延遲"

#. i18n: ectx: label, entry (AccessXBeep), group (Keyboard)
#: kcmaccessibilityactivationgestures.kcfg:29
#, kde-format
msgid "Use a beep for access"
msgstr "為無障礙使用嗶聲"

#. i18n: ectx: label, entry (SystemBell), group (Bell)
#: kcmaccessibilitybell.kcfg:9
#, kde-format
msgid "Use System Bell"
msgstr "使用系統響鈴"

#. i18n: ectx: label, entry (CustomBell), group (Bell)
#: kcmaccessibilitybell.kcfg:13
#, kde-format
msgid "Customize system bell"
msgstr "自訂系統響鈴"

#. i18n: ectx: label, entry (CustomBellFile), group (Bell)
#: kcmaccessibilitybell.kcfg:17
#, kde-format
msgid "Sound file for the Bell"
msgstr "響鈴用的音效檔"

#. i18n: ectx: label, entry (VisibleBell), group (Bell)
#: kcmaccessibilitybell.kcfg:20
#, kde-format
msgid "Use a visual bell instead of a sound"
msgstr "使用可視化響鈴而非音效響鈴"

#. i18n: ectx: label, entry (InvertScreen), group (Bell)
#: kcmaccessibilitybell.kcfg:24
#, kde-format
msgid "Invert the system colors on the bell"
msgstr "觸發響鈴時反轉系統色彩"

#. i18n: ectx: label, entry (VisibleBellColor), group (Bell)
#: kcmaccessibilitybell.kcfg:28
#, kde-format
msgid "Color of the Visible Bell"
msgstr "可視化響鈴的色彩"

#. i18n: ectx: label, entry (VisibleBellPause), group (Bell)
#: kcmaccessibilitybell.kcfg:32
#, kde-format
msgid "Duration of the Visible Bell"
msgstr "可視化響鈴的持續時間"

#. i18n: ectx: label, entry (ColorblindnessCorrection), group (Plugins)
#: kcmaccessibilitycolorblindnesscorrection.kcfg:13
#, kde-format
msgid "Whether Colorblindness Correction is enabled"
msgstr "是否要啟用色盲校正功能"

#. i18n: ectx: label, entry (StickyKeys), group (Keyboard)
#: kcmaccessibilitykeyboard.kcfg:9
#, kde-format
msgid "Use sticky Keys"
msgstr "使用相黏按鍵"

#. i18n: ectx: label, entry (StickyKeysLatch), group (Keyboard)
#: kcmaccessibilitykeyboard.kcfg:13
#, kde-format
msgid "Lock the sticky keys"
msgstr "鎖定相黏按鍵"

#. i18n: ectx: label, entry (StickyKeysAutoOff), group (Keyboard)
#: kcmaccessibilitykeyboard.kcfg:17
#, kde-format
msgid "Turn sticky keys off when two keys are pressed simultaneously"
msgstr "當同時按下兩個按鍵時關閉相黏(sticky)鍵"

#. i18n: ectx: label, entry (StickyKeysBeep), group (Keyboard)
#: kcmaccessibilitykeyboard.kcfg:21
#, kde-format
msgid "Beep on a sticky key press"
msgstr "按下相黏按鍵時發出嗶聲"

#. i18n: ectx: label, entry (ToggleKeysBeep), group (Keyboard)
#: kcmaccessibilitykeyboard.kcfg:25
#, kde-format
msgid "Toggle keys beep"
msgstr "切換按鍵嗶聲"

#. i18n: ectx: label, entry (KeyboardNotifyModifiers), group (Keyboard)
#: kcmaccessibilitykeyboard.kcfg:29
#, kde-format
msgid "Notify when a keyboard modifier is pressed"
msgstr "按下鍵盤修飾鍵時發送通知"

#. i18n: ectx: label, entry (SlowKeys), group (Keyboard)
#: kcmaccessibilitykeyboardfilters.kcfg:9
#, kde-format
msgid "Use slow keypresses"
msgstr "使用慢速按鍵"

#. i18n: ectx: label, entry (SlowKeysDelay), group (Keyboard)
#: kcmaccessibilitykeyboardfilters.kcfg:13
#, kde-format
msgid "Delay for the key press"
msgstr "按鍵延遲"

#. i18n: ectx: label, entry (SlowKeysPressBeep), group (Keyboard)
#: kcmaccessibilitykeyboardfilters.kcfg:17
#, kde-format
msgid "Beep on a slow keypress"
msgstr "進行慢速按鍵時發出嗶聲"

#. i18n: ectx: label, entry (SlowKeysAcceptBeep), group (Keyboard)
#: kcmaccessibilitykeyboardfilters.kcfg:21
#, kde-format
msgid "Beep on an accepted keypress"
msgstr "在按鍵被接受時發出嗶聲"

#. i18n: ectx: label, entry (SlowKeysRejectBeep), group (Keyboard)
#: kcmaccessibilitykeyboardfilters.kcfg:25
#, kde-format
msgid "Beep on a rejected keypress"
msgstr "在按鍵被拒絕時發出嗶聲"

#. i18n: ectx: label, entry (BounceKeys), group (Keyboard)
#: kcmaccessibilitykeyboardfilters.kcfg:29
#, kde-format
msgid "Bounce Keys"
msgstr "彈回按鍵"

#. i18n: ectx: label, entry (BounceKeysDelay), group (Keyboard)
#: kcmaccessibilitykeyboardfilters.kcfg:33
#, kde-format
msgid "Use a delay for bouncing"
msgstr "為彈回鍵使用延遲"

#. i18n: ectx: label, entry (BounceKeysRejectBeep), group (Keyboard)
#: kcmaccessibilitykeyboardfilters.kcfg:37
#, kde-format
msgid "Beep if a bounce key event is rejected"
msgstr "彈回鍵事件被拒絕時觸發響鈴"

#. i18n: ectx: label, entry (MouseKeys), group (Mouse)
#: kcmaccessibilitymouse.kcfg:9
#, kde-format
msgid "Use keys to control the mouse"
msgstr "用按鍵控制滑鼠"

#. i18n: ectx: label, entry (AccelerationDelay), group (Mouse)
#: kcmaccessibilitymouse.kcfg:13
#, kde-format
msgid "Delay for the mouse movement"
msgstr "滑鼠移動的延遲"

#. i18n: ectx: label, entry (RepetitionInterval), group (Mouse)
#: kcmaccessibilitymouse.kcfg:17
#, kde-format
msgid "Repetition interval for the mouse movement"
msgstr "滑鼠移動的重複間隔"

#. i18n: ectx: label, entry (AccelerationTime), group (Mouse)
#: kcmaccessibilitymouse.kcfg:21
#, kde-format
msgid "Time to hit maximum velocity"
msgstr "需要多久達到最大速率"

#. i18n: ectx: label, entry (MaxSpeed), group (Mouse)
#: kcmaccessibilitymouse.kcfg:25
#, kde-format
msgid "Maximum Velocity"
msgstr "最大速率"

#. i18n: ectx: label, entry (ProfileCurve), group (Mouse)
#: kcmaccessibilitymouse.kcfg:29
#, kde-format
msgid "Mouse Key Curve"
msgstr "滑鼠按鍵曲線"

#. i18n: ectx: label, entry (Enabled), group (ScreenReader)
#: kcmaccessibilityscreenreader.kcfg:9
#, kde-format
msgid "Enable Screen Reader"
msgstr "啟用螢幕閱讀器"

#. i18n: ectx: label, entry (ShakeCursor), group (Plugins)
#: kcmaccessibilityshakecursor.kcfg:9
#, kde-format
msgid "Whether Shake Cursor is enabled"
msgstr "是否要啟用游標甩動功能"

#. i18n: ectx: label, entry (ShakeCursorMagnification), group (Effect-shakecursor)
#: kcmaccessibilityshakecursor.kcfg:15
#, kde-format
msgid "Magnification"
msgstr "放大"

#: ui/ActivationShortcuts.qml:17
#, kde-format
msgctxt "@option:check"
msgid "Activation shortcuts:"
msgstr "觸發捷徑："

#: ui/ActivationShortcuts.qml:18
#, kde-format
msgctxt "Enable activation shortcuts"
msgid "Enable"
msgstr "啟用"

#: ui/ActivationShortcuts.qml:30
#, kde-format
msgctxt "@label"
msgid "Press Shift 5 times to enable Sticky Keys"
msgstr "按下 Shift 五次來啟用相黏鍵"

#: ui/ActivationShortcuts.qml:37
#, kde-format
msgctxt "@label"
msgid "Hold Shift for 8 seconds to enable Slow Keys"
msgstr "按住 Shift 8 秒鐘來啟用慢速按鍵"

#: ui/ActivationShortcuts.qml:46
#, kde-format
msgctxt "@option:check"
msgid "Disable sticky and slow keys after:"
msgstr "在未動作一段時間之後停用相黏鍵與慢速按鍵："

#: ui/ActivationShortcuts.qml:75
#, kde-format
msgid "%1 min"
msgid_plural "%1 min"
msgstr[0] "%1 分鐘"

#: ui/ActivationShortcuts.qml:79
#, kde-format
msgctxt "short for minute(s)"
msgid "min"
msgid_plural "min"
msgstr[0] "分鐘"

#: ui/ActivationShortcuts.qml:88
#, kde-format
msgid "When a shortcut is used:"
msgstr "捷徑被使用時："

#: ui/ActivationShortcuts.qml:89
#, kde-format
msgid "Display a confirmation dialog"
msgstr "顯示確認對話框"

#: ui/ActivationShortcuts.qml:100
#, kde-format
msgid "Ring the system bell"
msgstr "觸發系統響鈴"

#: ui/ActivationShortcuts.qml:111
#, kde-format
msgid "Show a notification"
msgstr "顯示一個通知"

#: ui/ActivationShortcuts.qml:122
#, kde-format
msgid "Configure Notifications…"
msgstr "設定通知…"

#: ui/Bell.qml:19
#, kde-format
msgid "Please choose an audio file"
msgstr "請選擇一個音效檔"

#: ui/Bell.qml:21
#, kde-format
msgctxt "Name filters in a file dialog. Do not translate `(*.ogg *.oga *.wav)`"
msgid "ogg, oga, and wav audio files (*.ogg *.oga *.wav)"
msgstr "ogg、oga 與 wav 音效檔 (*.ogg *.oga *.wav)"

#: ui/Bell.qml:30
#, kde-format
msgid "Audible bell:"
msgstr "有聲響鈴："

#: ui/Bell.qml:31
#, kde-format
msgctxt "Enable the system bell"
msgid "Enable"
msgstr "啟用"

#: ui/Bell.qml:42
#, kde-format
msgctxt "@label"
msgid "Emits a sound whenever certain keys are pressed"
msgstr "按下某些按鍵時發出聲響"

#: ui/Bell.qml:50
#, kde-format
msgctxt "Defines if the system will use a sound system bell"
msgid "Custom sound:"
msgstr "自訂音效："

#: ui/Bell.qml:83
#, kde-format
msgid "Search audio file for the system bell"
msgstr "搜尋系統響鈴用的音效檔"

#: ui/Bell.qml:84
#, kde-format
msgid "Button search audio file"
msgstr "按鈕搜尋音效檔"

#: ui/Bell.qml:100
#, kde-format
msgid "Visual bell:"
msgstr "可視化響鈴："

#: ui/Bell.qml:101
#, kde-format
msgctxt "Enable visual bell"
msgid "Enable"
msgstr "啟用"

#: ui/Bell.qml:113
#, kde-format
msgctxt "@label"
msgid "Flashes the screen whenever certain keys are pressed"
msgstr "按下某些按鍵時閃爍螢幕"

#: ui/Bell.qml:123
#, kde-format
msgctxt "@option:radio Invert screen colors when a system bell is rung"
msgid "Invert screen colors"
msgstr "反轉螢幕色彩"

#: ui/Bell.qml:141
#, kde-format
msgctxt "@option:radio Flash screen when a system bell is rung"
msgid "Flash screen"
msgstr "閃爍螢幕"

#: ui/Bell.qml:152
#, kde-format
msgctxt "Color of the system bell"
msgid "Color"
msgstr "色彩"

#: ui/Bell.qml:166
#, kde-format
msgctxt "Duration of the system bell"
msgid "Duration:"
msgstr "持續時間："

#: ui/Bell.qml:181 ui/KeyboardFilters.qml:55 ui/KeyboardFilters.qml:151
#: ui/MouseNavigation.qml:51 ui/MouseNavigation.qml:73
#: ui/MouseNavigation.qml:95
#, kde-format
msgid "%1 ms"
msgid_plural "%1 ms"
msgstr[0] "%1 毫秒"

#: ui/Bell.qml:185 ui/KeyboardFilters.qml:59 ui/KeyboardFilters.qml:155
#: ui/MouseNavigation.qml:55 ui/MouseNavigation.qml:77
#: ui/MouseNavigation.qml:99
#, kde-format
msgctxt "short for millisecond(s)"
msgid "ms"
msgid_plural "ms"
msgstr[0] "毫秒"

#: ui/ColorblindnessCorrection.qml:22
#, kde-format
msgctxt "@label"
msgid "Color blindness correction:"
msgstr "色盲校正："

#: ui/ColorblindnessCorrection.qml:23
#, kde-format
msgctxt "@option check, Enable color blindness correction effect"
msgid "Enable"
msgstr "啟用"

#: ui/ColorblindnessCorrection.qml:36
#, kde-format
msgctxt "@label"
msgid "Mode:"
msgstr "模式："

#: ui/ColorblindnessCorrection.qml:41
#, kde-format
msgctxt "@option"
msgid "Protanopia (red weak)"
msgstr "紅色盲（紅色弱）"

#: ui/ColorblindnessCorrection.qml:42
#, kde-format
msgctxt "@option"
msgid "Deuteranopia (green weak)"
msgstr "綠色盲（綠色弱）"

#: ui/ColorblindnessCorrection.qml:43
#, kde-format
msgctxt "@option"
msgid "Tritanopia (blue-yellow)"
msgstr "藍色盲（藍黃）"

#: ui/ColorblindnessCorrection.qml:58
#, kde-format
msgctxt "@label"
msgid "Intensity:"
msgstr "強度："

#: ui/ColorblindnessCorrection.qml:81
#, kde-format
msgctxt "@label Mild color blindness correction intensity"
msgid "Mild"
msgstr "中等"

#: ui/ColorblindnessCorrection.qml:88
#, kde-format
msgctxt "@label Intense color blindness correction intensity"
msgid "Intense"
msgstr "強烈"

#: ui/ColorblindnessCorrection.qml:111
#, kde-format
msgid "Red"
msgstr "紅色"

#: ui/ColorblindnessCorrection.qml:112
#, kde-format
msgid "Green"
msgstr "綠色"

#: ui/ColorblindnessCorrection.qml:113
#, kde-format
msgid "Blue"
msgstr "藍色"

#: ui/ColorblindnessCorrection.qml:114
#, kde-format
msgid "Purple"
msgstr "紫色"

#: ui/KeyboardFilters.qml:17
#, kde-format
msgid "Slow keys:"
msgstr "慢速按鍵："

#: ui/KeyboardFilters.qml:22
#, kde-format
msgctxt "Enable slow keys"
msgid "Enable"
msgstr "啟用"

#: ui/KeyboardFilters.qml:33
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"For a key to be accepted, it has to be held until the set amount of time. "
"Useful if you accidentally type more than one key at a time or have "
"difficulty pressing the key you want the first time."
msgstr ""
"按鍵需要按住一段時間才會被接受。在您容易意外重複按一個按鍵或較難第一次按到您"
"要按的按鍵時有幫助。"

#: ui/KeyboardFilters.qml:40
#, kde-format
msgctxt "Slow keys Delay"
msgid "Delay:"
msgstr "延遲："

#: ui/KeyboardFilters.qml:68
#, kde-format
msgid "Ring system bell:"
msgstr "觸發系統響鈴："

#: ui/KeyboardFilters.qml:69
#, kde-format
msgctxt "Use system bell when a key is pressed"
msgid "when any key is &pressed"
msgstr "當任何按鍵被按下時(&P)"

#: ui/KeyboardFilters.qml:83
#, kde-format
msgctxt "Use system bell when a key is accepted"
msgid "when any key is &accepted"
msgstr "當任何按鍵被接受時(&A)"

#: ui/KeyboardFilters.qml:97
#, kde-format
msgctxt "Use system bell when a key is rejected"
msgid "when any key is &rejected"
msgstr "當任何按鍵被拒絕時(&R)"

#: ui/KeyboardFilters.qml:113
#, kde-format
msgid "Bounce keys:"
msgstr "彈回按鍵："

#: ui/KeyboardFilters.qml:118
#, kde-format
msgctxt "Bounce keys enable"
msgid "Enable"
msgstr "啟用"

#: ui/KeyboardFilters.qml:129
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"Ignore rapid, repeated keypresses of the same key. Useful if you have hand "
"tremors that cause you to press a key multiple times when you only intend to "
"press once."
msgstr ""
"同一個按鍵快速重複按下時忽略。在因為手會抖而造成只希望按一次時按下按鍵多次時"
"有幫助。"

#: ui/KeyboardFilters.qml:136
#, kde-format
msgctxt "Bounce keys delay"
msgid "Delay:"
msgstr "延遲："

#: ui/KeyboardFilters.qml:162
#, kde-format
msgid "Ring system bell when rejected"
msgstr "拒絕按鍵時觸發系統響鈴"

#: ui/main.qml:28
#, kde-format
msgctxt "@title Category name in sidebar"
msgid "System Bell"
msgstr "系統響鈴"

#: ui/main.qml:33
#, kde-format
msgctxt "System Modifier Keys"
msgid "Modifier Keys"
msgstr "修飾鍵"

#: ui/main.qml:38
#, kde-format
msgctxt "System keyboard filters"
msgid "Keyboard Filters"
msgstr "鍵盤過濾器"

#: ui/main.qml:43
#, kde-format
msgctxt "System mouse navigation"
msgid "Mouse Navigation"
msgstr "滑鼠導覽"

#: ui/main.qml:48
#, kde-format
msgid "Activation Shortcuts"
msgstr "觸發捷徑"

#: ui/main.qml:53
#, kde-format
msgctxt "System mouse navigation"
msgid "Screen Reader"
msgstr "螢幕閱讀器"

#: ui/main.qml:58
#, kde-format
msgctxt "Correction for color blindness"
msgid "Color Blindness Correction"
msgstr "色盲校正"

#: ui/main.qml:63
#, kde-format
msgctxt "Shake cursor to find it"
msgid "Shake Cursor"
msgstr "甩動游標"

#: ui/ModifierKeys.qml:17
#, kde-format
msgctxt "@option:check"
msgid "Sticky keys:"
msgstr "相黏鍵："

#: ui/ModifierKeys.qml:22
#, kde-format
msgctxt "@option:check Enable sticky keys"
msgid "Enable"
msgstr "啟用"

#: ui/ModifierKeys.qml:33
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"Modifier keys like Ctrl, Shift, Alt, and the Meta/Super/Windows key act as "
"though they “stick in place” and no longer need to be held down when typing "
"a keyboard shortcut."
msgstr ""
"修飾鍵（像是 Ctrl、Alt 或 Meta/Super/Windows 鍵）會如同「黏住」一樣，讓輸入鍵"
"盤快捷鍵時不需要按住它們。"

#: ui/ModifierKeys.qml:39
#, kde-format
msgctxt "@option:check"
msgid "Lock sticky keys"
msgstr "鎖定相黏按鍵"

#: ui/ModifierKeys.qml:51
#, kde-format
msgctxt "@info:tooltip"
msgid ""
"Once locked, the “sticky” state of modifier keys will not be disabled until "
"a keyboard shortcut is finished or until a non-modifier key is pressed."
msgstr ""
"鎖定後，修飾鍵的「相黏」狀態會維持啟用，直到鍵盤快捷鍵完成或是按下非修飾鍵的"
"按鍵時才會停用。"

#: ui/ModifierKeys.qml:57
#, kde-format
msgid "Disable when two keys are held down"
msgstr "同時按下兩個按鍵時停用"

#: ui/ModifierKeys.qml:70
#, kde-format
msgid "Ring system bell when modifier keys are used"
msgstr "使用修飾鍵時觸發系統響鈴"

#: ui/ModifierKeys.qml:88
#, kde-format
msgctxt "@option:check Feedback options:"
msgid "Feedback:"
msgstr "回饋："

#: ui/ModifierKeys.qml:93
#, kde-format
msgctxt "@option:check"
msgid "Ring system bell when locking keys are used"
msgstr "使用鎖定鍵時觸發系統響鈴"

#: ui/ModifierKeys.qml:104
#, kde-format
msgctxt "@info:tooltip"
msgid "The locking keys are Caps Lock, Num Lock, and Scroll Lock."
msgstr ""
"「鎖定鍵」意指 Caps Lock（大寫鎖定）、Num Lock（數字鍵鎖定）及 Scroll "
"Lock（捲動鎖定）。"

#: ui/ModifierKeys.qml:108
#, kde-format
msgctxt "@option:check"
msgid "Show notification when modifier or locking keys are used"
msgstr "使用修飾鍵或鎖定鍵時顯示通知"

#: ui/ModifierKeys.qml:120
#, kde-format
msgctxt "@action:button"
msgid "Configure Notifications…"
msgstr "設定通知…"

#: ui/MouseNavigation.qml:16
#, kde-format
msgctxt "@option:check"
msgid "Use number pad to move cursor:"
msgstr "使用數字鍵盤移動游標："

#: ui/MouseNavigation.qml:21
#, kde-format
msgctxt "@option:check Enable mouse navigation"
msgid "Enable"
msgstr "啟用"

#: ui/MouseNavigation.qml:32
#, kde-kuit-format
msgctxt "@info:tooltip"
msgid ""
"The numpad key <shortcut>5</shortcut> functions as a mouse click. The keys "
"<shortcut>2</shortcut>, <shortcut>4</shortcut>, <shortcut>6</shortcut>, and "
"<shortcut>8</shortcut> allow for cardinal movement (down, left, right, and "
"up). The keys <shortcut>1</shortcut>, <shortcut>3</shortcut>, <shortcut>7</"
"shortcut>, and <shortcut>9</shortcut> allow for diagonal movement."
msgstr ""
"數字鍵盤的 <shortcut>5</shortcut> 會送出滑鼠主要點擊。<shortcut>2</"
"shortcut>、<shortcut>4</shortcut>、<shortcut>6</shortcut> 及 <shortcut>8</"
"shortcut> 按鍵可用來上下左右移動游標。<shortcut>1</shortcut>、<shortcut>3</"
"shortcut>、<shortcut>7</shortcut> 及 <shortcut>9</shortcut> 按鍵則可用來以 "
"45 度角移動游標。"

#: ui/MouseNavigation.qml:37
#, kde-format
msgctxt "@label:spinbox"
msgid "Acceleration delay:"
msgstr "加速延遲："

#: ui/MouseNavigation.qml:59
#, kde-format
msgctxt "@label:spinbox"
msgid "Repeat interval:"
msgstr "重複間隔："

#: ui/MouseNavigation.qml:81
#, kde-format
msgctxt "@label:spinbox"
msgid "Acceleration time:"
msgstr "加速時間："

#: ui/MouseNavigation.qml:103
#, kde-format
msgctxt "@label:spinbox"
msgid "Maximum speed:"
msgstr "最快速度："

#: ui/MouseNavigation.qml:117
#, kde-format
msgctxt "@label:spinbox"
msgid "Pointer acceleration:"
msgstr "指標加速："

#: ui/ScreenReader.qml:20
#, kde-format
msgctxt "@info Placeholder message title"
msgid "The Orca Screen Reader is not installed"
msgstr "Orca 螢幕閱讀器並未安裝"

#: ui/ScreenReader.qml:21
#, kde-format
msgctxt "@info Placeholder message explanation"
msgid "Please install it, then close and reopen this window"
msgstr "請安裝它之後關閉並重新開啟此視窗"

#: ui/ScreenReader.qml:27
#, kde-format
msgctxt "@option:check"
msgid "Enable Screen Reader"
msgstr "啟用螢幕閱讀器"

#: ui/ScreenReader.qml:39
#, kde-format
msgctxt "@action:button"
msgid "Launch Orca Screen Reader Configuration…"
msgstr "開啟 Orca 螢幕閱讀器設定…"

#: ui/ShakeCursor.qml:15
#, kde-format
msgctxt "@label"
msgid "Shake cursor to find it:"
msgstr "甩動游標來尋找它："

#: ui/ShakeCursor.qml:16
#, kde-format
msgctxt "@option check, Enable shake cursor effect"
msgid "Enable"
msgstr "啟用"

#: ui/ShakeCursor.qml:28
#, kde-format
msgctxt "@label Cursor magnification level"
msgid "Magnification:"
msgstr "放大："

#: ui/ShakeCursor.qml:55
#, kde-format
msgctxt "@label Normal cursor size"
msgid "Normal"
msgstr "一般"

#: ui/ShakeCursor.qml:62
#, kde-format
msgctxt "@label Large cursor size"
msgid "Large"
msgstr "巨大"

#~ msgid "Activation:"
#~ msgstr "觸發："

#~ msgid "Use gestures for activating sticky keys and slow keys"
#~ msgstr "使用手勢來觸發相黏鍵與慢速按鍵"

#~ msgctxt "Flash screen on a system bell"
#~ msgid "Flash"
#~ msgstr "閃光"

#~ msgid ""
#~ "For a key to be accepted, it has to be held until the set amount of time"
#~ msgstr "按鍵要被接受必須要先被持續按著一段時間"

#~ msgid "Ignore rapid, repeated keypresses of the same key"
#~ msgstr "忽略快速重複按下同一個按鍵的動作"

#~ msgctxt "System Bell"
#~ msgid "Bell"
#~ msgstr "響鈴"

#~ msgctxt "Enable sticky keys"
#~ msgid "Enable"
#~ msgstr "啟用"

#~ msgctxt "Lock sticky keys"
#~ msgid "Lock"
#~ msgstr "鎖定"

#~ msgid ""
#~ "Please note that you may have to log out or reboot once to allow the "
#~ "screen reader to work properly."
#~ msgstr "請注意，您可能需要登出或重新開機一次，才能讓螢幕閱讀器正確運作。"

#~ msgid ""
#~ "It appears that the Orca Screen Reader is not installed. Please install "
#~ "it before trying to use this feature, and then log out or reboot"
#~ msgstr ""
#~ "Orca 螢幕閱讀器看起來尚未安裝。使用這個功能前請先安裝它並重新登入或重新開"
#~ "機"

#~ msgid "Acceleration profile:"
#~ msgstr "加速設定檔："

#~ msgid ""
#~ "This module lets you configure the accessibility features such as a "
#~ "screen reader."
#~ msgstr "此模組能讓您設定無障礙輔助功能，例如螢幕閱讀器。"

#~ msgid "Maximum velocity"
#~ msgstr "最大速率"

#~ msgctxt "NAME OF TRANSLATORS"
#~ msgid "Your names"
#~ msgstr "薛景中, 王勝弘, Jeff Huang"

#~ msgctxt "EMAIL OF TRANSLATORS"
#~ msgid "Your emails"
#~ msgstr "shyue@sonoma.com.tw, gentamicin5@yahoo.com.tw, s8321414@gmail.com"

#, fuzzy
#~| msgid "KDE Accessibility Tool"
#~ msgid "Accessibility"
#~ msgstr "KDE 無障礙工具"

#~ msgid "(c) 2000, Matthias Hoelzer-Kluepfel"
#~ msgstr "(c) 2000, Matthias Hoelzer-Kluepfel"

#~ msgid "Matthias Hoelzer-Kluepfel"
#~ msgstr "Matthias Hoelzer-Kluepfel"

#~ msgid "Author"
#~ msgstr "作者"

#~ msgid ""
#~ "If this option is checked, the default system bell will be used. Usually, "
#~ "this is just a \"beep\"."
#~ msgstr "如果勾選此選項，會使用預設的系統鈴聲。通常只是個「嗶」聲而已。"

#~ msgid ""
#~ "Check this option if you want to use a customized bell, playing a sound "
#~ "file. If you do this, you will probably want to turn off the system bell."
#~ msgstr ""
#~ "勾選此選項可以改為播放一個聲音檔。如果您選擇此選項，可能要關閉系統鈴聲。"

#~ msgid "Us&e customized bell"
#~ msgstr "使用自訂響鈴(&E)"

#~ msgid ""
#~ "If the option \"Use customized bell\" is enabled, you can choose a sound "
#~ "file here. Click \"Browse...\" to choose a sound file using the file "
#~ "dialog."
#~ msgstr ""
#~ "如果選項\"使用自訂響鈴\"有啟動，您可以在這裡選擇一個聲音檔。點擊\"瀏覽..."
#~ "\"可用對話框選擇選擇一個聲音檔。"

#~ msgid "Sound &to play:"
#~ msgstr "要播放的聲音(&T):"

#~ msgid "Browse..."
#~ msgstr "瀏覽..."

#~ msgid ""
#~ "This option will turn on the \"visual bell\", i.e. a visual notification "
#~ "shown every time that normally just a bell would occur. This is "
#~ "especially useful for deaf people."
#~ msgstr ""
#~ "這個選項會開啟 \"可視化響鈴\"，也就是當鈴聲啟動時以可視化畫面的通知。 對於"
#~ "聽障而言這將很有用。"

#~ msgid "&Use visual bell"
#~ msgstr "使用可視化響鈴(&U)"

#~ msgid ""
#~ "The screen will turn to a custom color for the amount of time specified "
#~ "below."
#~ msgstr "畫面將會在下面指定的時間內轉變成自定的顏色。"

#~ msgid ""
#~ "All screen colors will be inverted for the amount of time specified below."
#~ msgstr "畫面所有的顏色將會在下面指定的時間內反白。"

#~ msgid ""
#~ "Click here to choose the color used for the \"flash screen\" visible bell."
#~ msgstr "按下這邊以選擇 \"閃爍螢幕\" 視覺響鈴所要使用的顏色。"

#~ msgid ""
#~ "Here you can customize the duration of the \"visible bell\" effect being "
#~ "shown."
#~ msgstr "您可以在這邊自訂 \"視覺響鈴\" 的持續時間。"

#~ msgid " msec"
#~ msgstr " 毫秒"

#~ msgid "Use system bell whenever a modifier gets latched, locked or unlocked"
#~ msgstr "當輔助鍵被鎖定或解鎖時使用系統鈴聲"

#~ msgid "Locking Keys"
#~ msgstr "鎖定按鍵"

#~ msgid "Use system bell whenever a locking key gets activated or deactivated"
#~ msgstr "當鎖定鍵作用或取消作用時使用系統鈴聲"

#~ msgid "Slo&w Keys"
#~ msgstr "慢速按鍵(&W)"

#~ msgid "Use bou&nce keys"
#~ msgstr "使用彈回按鍵(&N)"

#~ msgid ""
#~ "Use the system bell whenever a gesture is used to toggle an accessibility "
#~ "feature"
#~ msgstr "當使用手勢切換無障礙功能時使用系統鈴聲"

#~ msgid ""
#~ "If this option is checked, KDE will show a confirmation dialog whenever a "
#~ "keyboard accessibility feature is turned on or off.\n"
#~ "Ensure you know what you are doing if you uncheck it, as the keyboard "
#~ "accessibility settings will then always be applied without confirmation."
#~ msgstr ""
#~ "如果核取此選項，當開啟或關閉鍵盤無障礙功能時 KDE 會顯示確認對話盒。\n"
#~ "請注意了解您在做什麼，如果您核消它則鍵盤無障礙功能將設為不使用確認。"

#~ msgid ""
#~ "Show a confirmation dialog whenever a keyboard accessibility feature is "
#~ "toggled"
#~ msgstr "當切換鍵盤無障礙功能時顯示確認對話盒"

#~ msgid ""
#~ "Use Plasma's notification mechanism whenever a keyboard accessibility "
#~ "feature is toggled"
#~ msgstr "當切換鍵盤無障礙功能時使用 Plasma 通知機制"

#~ msgid "&Move pointer with keyboard (using the num pad)"
#~ msgstr "使用鍵盤（數字鍵盤）移動游標(&M)"

#~ msgid " pixel/sec"
#~ msgstr " 像素 / 秒"

#~ msgid "Screen reader enabled"
#~ msgstr "開啟螢幕閱讀器"

#~ msgid ""
#~ "Here you can activate keyboard gestures that turn on the following "
#~ "features: \n"
#~ "Sticky keys: Press Shift key 5 consecutive times\n"
#~ "Slow keys: Hold down Shift for 8 seconds"
#~ msgstr ""
#~ "您可以在這裡以鍵盤手勢開啟下列功能：\n"
#~ "相黏鍵：連續按 Shift 鍵 5 次\n"
#~ "放慢鍵：按住 Shift 8 秒"

#~ msgid ""
#~ "Here you can activate keyboard gestures that turn on the following "
#~ "features: \n"
#~ "Mouse Keys: %1\n"
#~ "Sticky keys: Press Shift key 5 consecutive times\n"
#~ "Slow keys: Hold down Shift for 8 seconds"
#~ msgstr ""
#~ "您可以在這裡以鍵盤手勢開啟下列功能：\n"
#~ "滑鼠鍵：%1\n"
#~ "相黏鍵：連續按 Shift 鍵 5 次\n"
#~ "放慢鍵：按住 Shift 8 秒"