# translation of katepart4.po to Punjabi
# Amanpreet Singh Alam If this option is checked, every new view will display an icon border on "
"the left hand side. The icon border shows bookmark signs, for instance."
" If this option is checked, every new view will show marks on the vertical "
"scrollbar. These marks will show bookmarks, for instance. If this option is checked, hovering over the vertical scrollbar will show "
"a preview of the text. Automatically start a new line of text when the current line exceeds the "
"length specified by the Wrap words at: option. This option does "
"not wrap existing lines of text - use the Apply Static Word Wrap "
"option in the Tools menu for that purpose. If you want lines to "
"be visually wrapped instead, according to the width of the view, "
"enable Dynamic Word Wrap in the Appearance config page. If this option is checked, a vertical line will be drawn at the word wrap "
"column as defined in the Editing properties. This string allows to configure Kate's settings for the files selected by "
"this mimetype using Kate variables. Almost any configuration option can be "
"set, such as highlight, indent-mode, encoding, etc. For a full list of "
"known variables, see the manual. Data Recovery (Help) Could "
#| "not recover all data. The swap file was probably incomplete. Tab key action (if no selection exists) Tab "
"to align the current line in the current code block like in Emacs, make "
"Tab a shortcut to the action Format Indentation."
"\">More ... ਡਾਟਾ ਰਿਕਵਰੀ (ਮੱਦਦ) ਸਭ ਡਾਟਾ ਰਿਕਵਰ ਨਹੀਂ "
"ਕੀਤਾ ਜਾ ਸਕਿਆ। ਸ਼ਾਇਦ ਸਵੈਪ ਫਾਇਲ ਪੂਰੀ ਨਹੀਂ ਹੈ। If the insertion point is at "
"or before the first non-space character in the line, or if there is a "
"selection, the current line is indented by the number of character positions "
"specified in Indentation width. If the insertion point is located "
"after the first non-space character in the line and there is no selection, "
"white space is inserted so that the next tab position is reached: if the "
"option Insert spaces instead of tabulators in the section Editing"
"b> is enabled, spaces are inserted; otherwise, a single tabulator is "
"inserted."
msgstr ""
#. i18n: ectx: property (text), widget (QRadioButton, rbTabSmart)
#: dialogs/indentationconfigwidget.ui:299
#, kde-format
msgid "Increase indentation level if in l&eading blank space"
msgstr ""
#: dialogs/katedialogs.cpp:184 dialogs/katedialogs.cpp:186
#, fuzzy, kde-format
#| msgctxt "Wrap words at"
#| msgid " character"
#| msgid_plural " characters"
msgid "%v character"
msgid_plural "%v characters"
msgstr[0] " ਅੱਖਰ"
msgstr[1] " ਅੱਖਰ"
#: dialogs/katedialogs.cpp:210
#, kde-format
msgid "Indentation"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ"
#: dialogs/katedialogs.cpp:294
#, kde-format
msgid "Auto Completion"
msgstr "ਆਟੋ ਮੁਕੰਮਲ"
#: dialogs/katedialogs.cpp:361
#, kde-format
msgid "Spellcheck"
msgstr "ਸਪੈਲਿੰਗ ਚੈੱਕ"
#: dialogs/katedialogs.cpp:408 dialogs/katedialogs.cpp:415
#, fuzzy, kde-format
#| msgctxt "@item:intable Text context"
#| msgid "Alert"
msgid "Alt"
msgstr "ਚੇਤਾਵਨੀ"
#: dialogs/katedialogs.cpp:409 dialogs/katedialogs.cpp:417
#, kde-format
msgid "Ctrl"
msgstr ""
#: dialogs/katedialogs.cpp:410
#, kde-format
msgid "Meta"
msgstr ""
#: dialogs/katedialogs.cpp:411 dialogs/katedialogs.cpp:419
#, kde-format
msgid "Ctrl + Alt"
msgstr ""
#: dialogs/katedialogs.cpp:412
#, kde-format
msgid "Meta + Alt"
msgstr ""
#: dialogs/katedialogs.cpp:413
#, kde-format
msgid "Ctrl + Meta"
msgstr ""
#: dialogs/katedialogs.cpp:416
#, fuzzy, kde-format
#| msgid "Command"
msgid "Cmd"
msgstr "ਕਮਾਂਡ"
#: dialogs/katedialogs.cpp:418
#, kde-format
msgid "Cmd + Alt"
msgstr ""
#: dialogs/katedialogs.cpp:420
#, kde-format
msgid "Cmd + Ctrl"
msgstr ""
#: dialogs/katedialogs.cpp:476
#, kde-format
msgid "Text Navigation"
msgstr "ਟੈਕਸਟ ਨੇਵੀਗੇਸ਼ਨ"
#: dialogs/katedialogs.cpp:578
#, fuzzy, kde-format
#| msgctxt "Wrap words at"
#| msgid " character"
#| msgid_plural " characters"
msgctxt "Wrap words at (value is at 20 or larger)"
msgid "%v character"
msgid_plural "%v characters"
msgstr[0] " ਅੱਖਰ"
msgstr[1] " ਅੱਖਰ"
#: dialogs/katedialogs.cpp:583
#, kde-format
msgid "Feature is not active"
msgstr ""
#: dialogs/katedialogs.cpp:585
#, fuzzy, kde-format
#| msgid "Disabled Breakpoint"
msgid "Disable Feature"
msgstr "ਆਯੋਗ ਬਰੇਕ-ਪੁਆਇੰਟ"
#: dialogs/katedialogs.cpp:587
#, kde-format
msgid "May be handy with Markdown"
msgstr ""
#: dialogs/katedialogs.cpp:589
#, kde-format
msgid "Mirror characters, similar but not exactly like auto brackets"
msgstr ""
#: dialogs/katedialogs.cpp:591
#, fuzzy, kde-format
#| msgid "Non-word character"
msgid "Non letter character"
msgstr "ਗ਼ੈਰ-ਸ਼ਬਦ ਅੱਖਰ"
#: dialogs/katedialogs.cpp:707
#, kde-format
msgid "Editing"
msgstr "ਸੰਪਾਦਨ"
#: dialogs/katedialogs.cpp:712
#, kde-format
msgid "Editing Options"
msgstr "ਸੰਪਾਦਨ ਚੋਣ"
#: dialogs/katedialogs.cpp:745
#, fuzzy, kde-format
#| msgctxt "Language"
#| msgid "Stata"
msgid "Statusbar"
msgstr "Stata"
#: dialogs/katedialogs.cpp:747
#, kde-format
msgid "Off"
msgstr "ਬੰਦ"
#: dialogs/katedialogs.cpp:748
#, kde-format
msgid "Follow Line Numbers"
msgstr "ਹੇਠਾਂ ਲਾਈਨ ਨੰਬਰ"
#: dialogs/katedialogs.cpp:947 dialogs/katedialogs.cpp:952
#, kde-format
msgid "Appearance"
msgstr "ਦਿੱਖ"
#: dialogs/katedialogs.cpp:987
#, kde-format
msgid ""
"%1 backs up unsaved files to \"swap files.\" Swap files allow %1 to recover "
"your work in the case of a system crash. Disabling swap files may cause data "
"loss in case of a system crash."
msgstr ""
#: dialogs/katedialogs.cpp:1027
#, kde-format
msgid "Advanced"
msgstr "ਮਾਹਰ"
#: dialogs/katedialogs.cpp:1092
#, kde-format
msgid ""
"You did not provide a backup suffix or prefix. Using default suffix: '~'"
msgstr ""
#: dialogs/katedialogs.cpp:1092
#, kde-format
msgid "No Backup Suffix or Prefix"
msgstr "ਬੈਕਅੱਪ ਲਈ ਕੋਈ ਅਗੇਤਰ ਜਾਂ ਪਿਛੇਤਰ ਨਹੀਂ"
#: dialogs/katedialogs.cpp:1223
#, kde-format
msgid "Open/Save"
msgstr "ਖੋਲ੍ਹੋ/ਸੰਭਾਲੋ"
#: dialogs/katedialogs.cpp:1228
#, kde-format
msgid "File Opening & Saving"
msgstr "ਫਾਇਲ ਖੋਲ੍ਹਣੀ ਅਤੇ ਸੰਭਾਲਣੀ"
#: dialogs/katedialogs.cpp:1251
#, kde-format
msgid "&Line:"
msgstr ""
#: dialogs/katedialogs.cpp:1252
#, kde-format
msgid "Go to line number from clipboard"
msgstr ""
#: dialogs/katedialogs.cpp:1263
#, kde-format
msgid "Go to"
msgstr ""
#: dialogs/katedialogs.cpp:1343
#, kde-format
msgid "No valid line number found in clipboard"
msgstr ""
#: dialogs/katedialogs.cpp:1407
#, kde-format
msgid "Dictionary:"
msgstr "ਡਿਕਸ਼ਨਰੀ:"
#: dialogs/katedialogs.cpp:1459
#, fuzzy, kde-format
#| msgid "Auto Completion"
msgid "Enable Auto Reload"
msgstr "ਆਟੋ ਮੁਕੰਮਲ"
#: dialogs/katedialogs.cpp:1462
#, kde-format
msgid ""
"Reloads and will automatically reload without warning about disk changes "
"from now until you close either the tab or window."
msgstr ""
#: dialogs/katedialogs.cpp:1467
#, fuzzy, kde-format
#| msgid "&View Difference"
msgid "View &Difference"
msgstr "ਅੰਤਰ ਵੇਖੋ(&V)"
#: dialogs/katedialogs.cpp:1469
#, kde-format
msgid "Shows a diff of the changes."
msgstr ""
#: dialogs/katedialogs.cpp:1474
#, fuzzy, kde-format
#| msgid "Reloa&d"
msgid "&Reload"
msgstr "ਮੁੜ-ਲੋਡ(&d)"
#: dialogs/katedialogs.cpp:1476
#, fuzzy, kde-format
#| msgid ""
#| "Reload the file from disk. If you have unsaved changes, they will be lost."
msgid "Reloads the file from disk. Unsaved changes will be lost."
msgstr ""
"ਡਿਸਕ ਤੋਂ ਫਾਇਲ ਮੁੜ ਲੋਡ ਕਰੋ। ਜੇਕਰ ਤੁਹਾਡੇ ਕੋਲ ਕੁਝ ਨਾ-ਸੰਭਾਲੀਆਂ ਤਬਦੀਲੀਆਂ ਹੋਈਆਂ ਤਾਂ ਉਹ ਖਤਮ ਹੋ "
"ਜਾਣਗੀਆਂ।"
#: dialogs/katedialogs.cpp:1480
#, fuzzy, kde-format
#| msgid "&Close"
msgctxt "@action:button closes the opened file"
msgid "&Close File"
msgstr "ਬੰਦ ਕਰੋ(&C)"
#: dialogs/katedialogs.cpp:1482
#, kde-format
msgid "Closes the file, discarding its content."
msgstr ""
#: dialogs/katedialogs.cpp:1486
#, fuzzy, kde-format
#| msgid "&Save File As..."
msgctxt "@action"
msgid "&Save As…"
msgstr "ਫਾਇਲ ਇੰਝ ਸੰਭਾਲੋ(&S)..."
#: dialogs/katedialogs.cpp:1488
#, kde-format
msgid "Lets you select a location and save the file again."
msgstr "ਤੁਸੀਂ ਇੱਕ ਵਾਰ ਫੇਰ ਟਿਕਾਣੇ ਦੀ ਚੋਣ ਕਰੋ ਅਟੇ ਫਾਇਲ ਨੂੰ ਸੰਭਾਲਣ ਦੀ ਮੁੜ ਕੋਸ਼ਸ਼ ਕਰੋ।"
#. i18n: ectx: property (text), widget (QPushButton, m_skipBtn)
#: dialogs/katedialogs.cpp:1493 spellcheck/spellcheckbar.ui:143
#, kde-format
msgid "&Ignore"
msgstr "ਅਣਡਿੱਠਾ(&I)"
#: dialogs/katedialogs.cpp:1494
#, fuzzy, kde-format
#| msgid "Ignore the changes. You will not be prompted again."
msgid "Ignores the changes on disk without any action."
msgstr "ਤਬਦੀਲੀਆਂ ਅਣਡਿੱਠੀਆਂ। ਤੁਹਾਨੂੰ ਮੁੜ ਪੁਛਿਆ ਨਹੀਂ ਜਾਵੇਗਾ।"
#: dialogs/katedialogs.cpp:1560 swapfile/kateswapdiffcreator.cpp:131
#, kde-format
msgid ""
"The diff command failed. Please make sure that diff(1) is installed and in "
"your PATH."
msgstr ""
"ਅੰਤਰ(diff) ਕਮਾਂਡ ਅਸਫ਼ਲ ਰਹੀ ਹੈ। ਇਹ ਪੁਸ਼ਟੀ ਕਰੋ ਕਿ ਤੁਹਾਡੇ ਸਿਸਟਮ ਉੱਤੇ diff(1) ਇੰਸਟਾਲ ਹੈ ਅਤੇ ਇਹ "
"ਤੁਹਾਡੇ ਮਾਰਗ (PATH) 'ਚ ਹੈ।"
#: dialogs/katedialogs.cpp:1562 swapfile/kateswapdiffcreator.cpp:89
#: swapfile/kateswapdiffcreator.cpp:99 swapfile/kateswapdiffcreator.cpp:133
#, kde-format
msgid "Error Creating Diff"
msgstr "ਅੰਤਰ ਬਣਾਉਣ ਦੌਰਾਨ ਗਲਤੀ"
#: dialogs/katedialogs.cpp:1569 swapfile/kateswapdiffcreator.cpp:140
#, kde-format
msgid "The files are identical."
msgstr "ਫਾਇਲਾਂ ਇੱਕੋ ਜਿਹੀਆਂ ਹਨ।"
#: dialogs/katedialogs.cpp:1569 swapfile/kateswapdiffcreator.cpp:140
#, kde-format
msgid "Diff Output"
msgstr "ਅੰਤਰ ਆਉਟਪੁੱਟ"
#. i18n: ectx: property (title), widget (QGroupBox, gbCursorMovement)
#: dialogs/navigationconfigwidget.ui:29
#, kde-format
msgid "Text Cursor Movement"
msgstr "ਟੈਕਸਟ ਕਰਸਰ ਏਧਰ-ਓਧਰ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkSmartHome)
#: dialogs/navigationconfigwidget.ui:35
#, kde-format
msgid ""
"When selected, pressing the home key will cause the cursor to skip "
"whitespace and go to the start of a line's text. The same applies for the "
"end key."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkSmartHome)
#: dialogs/navigationconfigwidget.ui:38
#, kde-format
msgid "Smart ho&me and smart end"
msgstr "ਸਮਾਰਟ ਹੋਮ ਅਤੇ ਸਮਾਰਟ ਐਂਡ(&m)"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkPagingMovesCursor)
#: dialogs/navigationconfigwidget.ui:45
#, kde-format
msgid ""
"Selects whether the PageUp and PageDown keys should alter the vertical "
"position of the cursor relative to the top of the view."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkPagingMovesCursor)
#: dialogs/navigationconfigwidget.ui:48
#, kde-format
msgid "&PageUp/PageDown moves cursor"
msgstr "&PageUp/PageDown ਕਰਸਰ ਏਧਰ-ਓਧਰ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkCamelCursor)
#: dialogs/navigationconfigwidget.ui:55
#, kde-format
msgid "Selects whether cursor jumps full words or breaks at camel case humps."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkCamelCursor)
#: dialogs/navigationconfigwidget.ui:58
#, kde-format
msgid "Enable camel case cursor movement"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblAutoCenterCursor)
#: dialogs/navigationconfigwidget.ui:79
#, fuzzy, kde-format
#| msgid "&Autocenter cursor (lines):"
msgid "&Autocenter cursor:"
msgstr "ਆਟੋ-ਸੈਂਟਰ ਕਰਸਰ (ਲਾਈਨਾਂ)(&A):"
#. i18n: ectx: property (whatsThis), widget (QSpinBox, sbAutoCenterCursor)
#: dialogs/navigationconfigwidget.ui:89
#, kde-format
msgid ""
"Sets the number of lines to maintain visible above and below the cursor when "
"possible."
msgstr ""
#. i18n: ectx: property (text), item, widget (QComboBox, cmbSwapFileMode)
#. i18n: ectx: property (specialValueText), widget (QSpinBox, spbSwapFileSync)
#. i18n: ectx: property (specialValueText), widget (QSpinBox, sbAutoCenterCursor)
#: dialogs/navigationconfigwidget.ui:92 dialogs/opensaveconfigadvwidget.ui:145
#: dialogs/opensaveconfigadvwidget.ui:193
#, kde-format
msgid "Disabled"
msgstr "ਆਯੋਗ"
#. i18n: ectx: property (suffix), widget (QSpinBox, sbAutoCenterCursor)
#: dialogs/navigationconfigwidget.ui:95
#, kde-format
msgid " lines"
msgstr " ਲਾਈਨ"
#. i18n: ectx: property (title), widget (QGroupBox, cbNavigationMisc)
#: dialogs/navigationconfigwidget.ui:120
#, kde-format
msgid "Misc"
msgstr "ਫੁਟਕਲ"
#. i18n: ectx: property (text), widget (QLabel, lblTextSelectionMode)
#: dialogs/navigationconfigwidget.ui:128
#, kde-format
msgid "Text selection mode:"
msgstr "ਟੈਕਸਟ ਚੋਣ ਮੋਡ:"
#. i18n: ectx: property (text), item, widget (QComboBox, cbTextSelectionMode)
#: dialogs/navigationconfigwidget.ui:139 inputmode/katenormalinputmode.cpp:65
#: mode/katemodemanager.cpp:162
#, kde-format
msgid "Normal"
msgstr "ਸਧਾਰਨ"
#. i18n: ectx: property (text), item, widget (QComboBox, cbTextSelectionMode)
#: dialogs/navigationconfigwidget.ui:144
#, kde-format
msgid "Persistent"
msgstr "ਸਥਿਰ"
#. i18n: ectx: property (text), widget (QCheckBox, chkScrollPastEnd)
#: dialogs/navigationconfigwidget.ui:167
#, kde-format
msgid "Allow scrolling past the end of the document"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkBackspaceRemoveComposed)
#: dialogs/navigationconfigwidget.ui:174
#, kde-format
msgid ""
"When selected, composed characters are removed with their diacritics instead "
"of only removing the base character. This is useful for Indic locales."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkBackspaceRemoveComposed)
#: dialogs/navigationconfigwidget.ui:177
#, kde-format
msgid "Backspace key removes character’s base with its diacritics"
msgstr ""
#. i18n: ectx: property (title), widget (QGroupBox, gbMulticursor)
#: dialogs/navigationconfigwidget.ui:187
#, fuzzy, kde-format
#| msgid "From &cursor"
msgid "Multicursor"
msgstr "ਕਰਸਰ ਤੋਂ(&c)"
#. i18n: ectx: property (text), widget (QLabel, lblMulticursormodifiers)
#: dialogs/navigationconfigwidget.ui:193
#, kde-format
msgid "Multiple Cursor Modifiers"
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkAutoReloadVersionControl)
#: dialogs/opensaveconfigadvwidget.ui:34
#, kde-format
msgid "Auto reload files in version control"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label)
#: dialogs/opensaveconfigadvwidget.ui:41
#, kde-format
msgid "Write a backup file on save for:"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkBackupLocalFiles)
#: dialogs/opensaveconfigadvwidget.ui:48
#, kde-format
msgid ""
"If this option is enabled, backups for local files will be created when "
"saving."
msgstr "ਜੇ ਇਹ ਚੋਣ ਕਰਦੇ ਹੋ ਤਾਂ ਲੋਕਲ ਫਾਇਲਾਂ ਨੂੰ ਸੰਭਾਲਣ ਸਮੇਂ ਬੈਕਅੱਪ ਲਿਆ ਜਾਵੇਗਾ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkBackupLocalFiles)
#: dialogs/opensaveconfigadvwidget.ui:51
#, kde-format
msgid "&Local files"
msgstr "ਲੋਕਲ ਫਾਇਲਾਂ(&L)"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkBackupRemoteFiles)
#: dialogs/opensaveconfigadvwidget.ui:58
#, kde-format
msgid ""
"If this option is enabled, backups for remote files will be created when "
"saving."
msgstr "ਇਸ ਦੀ ਚੋਣ ਕੀਤੀ ਤਾਂ ਰਿਮੋਟ ਫਾਇਲਾਂ ਨੂੰ ਸੰਭਾਲਣ ਸਮੇਂ ਬੈਕਅੱਪ ਲਿਆ ਜਾਵੇਗਾ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkBackupRemoteFiles)
#: dialogs/opensaveconfigadvwidget.ui:61
#, kde-format
msgid "&Remote files"
msgstr "ਰਿਮੋਟ ਫਾਇਲਾਂ(&R)"
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: dialogs/opensaveconfigadvwidget.ui:84
#, kde-format
msgid "Prefix for backup files:"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QLineEdit, edtBackupPrefix)
#: dialogs/opensaveconfigadvwidget.ui:94
#, kde-format
msgid "Enter the prefix to prepend to the backup file names."
msgstr "ਬੈਕਅੱਪ ਫਾਇਲ ਨਾਂ ਲਈ ਜੋੜਨ ਵਾਸਤੇ ਅਗੇਤਰ ਦਿਓ।"
#. i18n: ectx: property (text), widget (QLabel, label_6)
#: dialogs/opensaveconfigadvwidget.ui:101
#, kde-format
msgid "Suffix for backup files:"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QLineEdit, edtBackupSuffix)
#: dialogs/opensaveconfigadvwidget.ui:111
#, kde-format
msgid "Enter the suffix to append to the backup file names."
msgstr "ਬੈਕਅੱਪ ਫਾਇਲ ਨਾਂ ਲਈ ਜੋੜਨ ਵਾਸਤੇ ਪਿਛੇਤਰ ਦਿਓ।"
#. i18n: ectx: property (text), widget (QLabel, lblSwapFileMode)
#: dialogs/opensaveconfigadvwidget.ui:134
#, fuzzy, kde-format
#| msgid "Swap file:"
msgid "Swap file mode:"
msgstr "ਸਵੈਪ ਫਾਇਲ:"
#. i18n: ectx: property (text), item, widget (QComboBox, cmbSwapFileMode)
#: dialogs/opensaveconfigadvwidget.ui:150
#, kde-format
msgid "Enabled, Store In Default Directory"
msgstr ""
#. i18n: ectx: property (text), item, widget (QComboBox, cmbSwapFileMode)
#: dialogs/opensaveconfigadvwidget.ui:155
#, kde-format
msgid "Enabled, Store In Custom Directory"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblSwapDirectory)
#: dialogs/opensaveconfigadvwidget.ui:163
#, fuzzy, kde-format
#| msgid "Swap file:"
msgid "Store swap files in:"
msgstr "ਸਵੈਪ ਫਾਇਲ:"
#. i18n: ectx: property (text), widget (QLabel, lblSwapFileSync)
#: dialogs/opensaveconfigadvwidget.ui:183
#, fuzzy, kde-format
#| msgid "Disable swap files syncing."
msgid "Save swap files every:"
msgstr "ਸਵੈਪ ਫਾਇਲ ਸਿੰਕ ਕਰਨਾ ਬੰਦ ਕਰੋ।"
#. i18n: ectx: property (suffix), widget (QSpinBox, spbSwapFileSync)
#: dialogs/opensaveconfigadvwidget.ui:196
#, kde-format
msgid "s"
msgstr "s"
#. i18n: ectx: property (text), widget (QLabel, lblExplanatory)
#: dialogs/opensaveconfigadvwidget.ui:221
#, kde-format
msgid ""
"This string is located in katedialogs.cpp in KateSaveConfigTab's constructor."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkEditorConfig)
#: dialogs/opensaveconfigadvwidget.ui:247
#, fuzzy, kde-format
#| msgid "Do not use config file"
msgid "Honor settings in .editorconfig file"
msgstr "ਸੰਰਚਨਾ ਫਾਈਲ ਨਾ ਵਰਤੋਂ"
#. i18n: ectx: property (title), widget (QGroupBox, gbFileFormat)
#: dialogs/opensaveconfigwidget.ui:29
#, kde-format
msgid "File Format"
msgstr "ਫਾਇਲ ਫਾਰਮੈਟ"
#. i18n: ectx: property (text), widget (QLabel, lblEncoding)
#: dialogs/opensaveconfigwidget.ui:40
#, kde-format
msgid "&Encoding:"
msgstr "ਇੰਕੋਡਿੰਗ(&E):"
#. i18n: ectx: property (whatsThis), widget (QComboBox, cmbEncoding)
#: dialogs/opensaveconfigwidget.ui:50
#, kde-format
msgid ""
"This defines the standard encoding to use to open/save files, if not changed "
"in the open/save dialog or by using a command line option."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblEncodingDetection)
#: dialogs/opensaveconfigwidget.ui:57
#, fuzzy, kde-format
#| msgid "&Encoding Detection:"
msgid "&Encoding detection:"
msgstr "ਇੰਕੋਡਿੰਗ ਖੋਜ(&E):"
#. i18n: ectx: property (whatsThis), widget (QComboBox, cmbEncodingDetection)
#: dialogs/opensaveconfigwidget.ui:67
#, kde-format
msgid ""
"if neither the encoding chosen as standard above, nor the encoding specified "
"in the open/save dialog, nor the encoding specified on command line match "
"the content of the file, this detection will be run."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblEncodingDetection2)
#: dialogs/opensaveconfigwidget.ui:74
#, fuzzy, kde-format
#| msgid "&Fallback Encoding:"
msgid "&Fallback encoding:"
msgstr "ਫਾਲਬੈਕ ਇੰਕੋਡਿੰਗ(&F):"
#. i18n: ectx: property (whatsThis), widget (QComboBox, cmbEncodingFallback)
#: dialogs/opensaveconfigwidget.ui:84
#, kde-format
msgid ""
"This defines the fallback encoding to try for opening files if neither the "
"encoding chosen as standard above, nor the encoding specified in the open/"
"save dialog, nor the encoding specified on command line match the content of "
"the file. Before this is used, an attempt will be made to determine the "
"encoding to use by looking for a byte order mark at start of file: if one is "
"found, the right Unicode encoding will be chosen; otherwise encoding "
"detection will run, if both fail the fallback encoding will be tried."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblEOL)
#: dialogs/opensaveconfigwidget.ui:91
#, kde-format
msgid "E&nd of line:"
msgstr "ਲਾਈਨ ਦਾ ਅੰਤ(&n):"
#. i18n: ectx: property (text), item, widget (QComboBox, cmbEOL)
#: dialogs/opensaveconfigwidget.ui:102
#, kde-format
msgid "UNIX"
msgstr "UNIX"
#. i18n: ectx: property (text), item, widget (QComboBox, cmbEOL)
#: dialogs/opensaveconfigwidget.ui:107
#, kde-format
msgid "DOS/Windows"
msgstr "DOS/Windows"
#. i18n: ectx: property (text), item, widget (QComboBox, cmbEOL)
#: dialogs/opensaveconfigwidget.ui:112
#, kde-format
msgid "Macintosh"
msgstr "ਮੈਕਨਾਤੋਸ਼"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkDetectEOL)
#: dialogs/opensaveconfigwidget.ui:122
#, kde-format
msgid ""
"If this option is enabled the editor will autodetect the end of line type. "
"The first found end of line type will be used for the whole file."
msgstr ""
"ਇਹ ਚੋਣ ਕਰੋ, ਜੇ ਤੁਸੀਂ ਚਾਹੁੰਦੇ ਹੋ ਕਿ ਸੰਪਾਦਕ ਆਟੋਮੈਟਿਕ ਹੀ ਲਾਈਨ ਅੰਤ ਕਿਸਮ ਦੀ ਖੋਜ ਕਰੇ। ਪਹਿਲੀਂ ਲੱਭੀ "
"ਲਾਈਨ ਅੰਤ ਕਿਸਮ ਪੂਰੀ ਫਾਇਲ ਲਈ ਵਰਤੀ ਜਾਵੇਗੀ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkDetectEOL)
#: dialogs/opensaveconfigwidget.ui:125
#, kde-format
msgid "A&utomatic end of line detection"
msgstr "ਆਟੋਮੈਟਿਕ ਲਾਈਨ ਅੰਤ ਦੀ ਖੋਜ(&A)"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkEnableBOM)
#: dialogs/opensaveconfigwidget.ui:132
#, kde-format
msgid ""
"The byte order mark is a special sequence at the beginning of Unicode "
"encoded documents. It helps editors to open text documents with the correct "
"Unicode encoding. The byte order mark is not visible in the displayed "
"document."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkEnableBOM)
#: dialogs/opensaveconfigwidget.ui:135
#, kde-format
msgid "Enable byte order mark (BOM)"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label)
#: dialogs/opensaveconfigwidget.ui:142
#, kde-format
msgid "Line length limit:"
msgstr ""
#. i18n: ectx: property (specialValueText), widget (QSpinBox, lineLengthLimit)
#: dialogs/opensaveconfigwidget.ui:152
#, kde-format
msgid "Unlimited"
msgstr "ਬੇਅੰਤ"
#. i18n: ectx: property (title), widget (QGroupBox, gbCleanups)
#: dialogs/opensaveconfigwidget.ui:168
#, fuzzy, kde-format
#| msgid "Automatic Cleanups on Load/Save"
msgid "Automatic Cleanups on Save"
msgstr "ਲੋਡ ਕਰਨ/ਸੰਭਾਲਣ ਸਮੇਂ ਆਟੋਮੈਟਿਕ ਹੀ ਸਾਫ਼ ਕਰੋ"
#. i18n: ectx: property (whatsThis), widget (QLabel, lblRemoveTrailingSpaces)
#. i18n: ectx: property (whatsThis), widget (QComboBox, cbRemoveTrailingSpaces)
#: dialogs/opensaveconfigwidget.ui:176 dialogs/opensaveconfigwidget.ui:189
#, kde-format
msgid ""
"Depending on the choice, trailing spaces are removed when saving a document, "
"either in the entire document or only of modified lines."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblRemoveTrailingSpaces)
#: dialogs/opensaveconfigwidget.ui:179
#, fuzzy, kde-format
#| msgid "Re&move trailing spaces"
msgid "Re&move trailing spaces:"
msgstr "ਅੰਤਮ ਖਾਲੀ ਥਾਂ ਹਟਾਓ(&m)"
#. i18n: ectx: property (text), item, widget (QComboBox, cbRemoveTrailingSpaces)
#. i18n: ectx: property (specialValueText), widget (QSpinBox, spbAutoSaveInterval)
#. i18n: ectx: property (text), item, widget (QComboBox, spacesComboBox)
#: dialogs/opensaveconfigwidget.ui:193 dialogs/opensaveconfigwidget.ui:270
#: dialogs/textareaappearanceconfigwidget.ui:104
#, kde-format
msgid "Never"
msgstr "ਕਦੇ ਨਹੀਂ"
#. i18n: ectx: property (text), item, widget (QComboBox, cbRemoveTrailingSpaces)
#: dialogs/opensaveconfigwidget.ui:198
#, fuzzy, kde-format
#| msgid "Move Lines Up"
msgid "On Modified Lines"
msgstr "ਲਾਈਨਾਂ ਉੱਤੇ ਭੇਜੋ"
#. i18n: ectx: property (text), item, widget (QComboBox, cbRemoveTrailingSpaces)
#: dialogs/opensaveconfigwidget.ui:203
#, kde-format
msgid "In Entire Document"
msgstr "ਪੂਰੇ ਡੌਕੂਮੈਂਟ ਵਿੱਚ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkNewLineAtEof)
#: dialogs/opensaveconfigwidget.ui:226
#, kde-format
msgid ""
"On save, a line break is appended to the document if not already present. "
"The line break is visible after reloading the file."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkNewLineAtEof)
#: dialogs/opensaveconfigwidget.ui:229
#, kde-format
msgid "Append newline at end of file on save"
msgstr ""
#. i18n: ectx: property (title), widget (QGroupBox, gbAutoSave)
#: dialogs/opensaveconfigwidget.ui:239
#, fuzzy, kde-format
#| msgid "Auto Completion"
msgid "Enable Auto Save (local files only)"
msgstr "ਆਟੋ ਮੁਕੰਮਲ"
#. i18n: ectx: property (text), widget (QCheckBox, cbAutoSaveOnFocus)
#: dialogs/opensaveconfigwidget.ui:254
#, kde-format
msgid "Auto save document when the active document is losing focus"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: dialogs/opensaveconfigwidget.ui:263
#, kde-format
msgid "Auto save interval:"
msgstr ""
#. i18n: ectx: property (suffix), widget (QSpinBox, spbAutoSaveInterval)
#: dialogs/opensaveconfigwidget.ui:273
#, kde-format
msgid " seconds"
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, cbShowHighlightingMode)
#: dialogs/statusbarconfigwidget.ui:19
#, fuzzy, kde-format
#| msgid "Syntax highlighting"
msgid "Show highlighting mode"
msgstr "ਸੰਟੈਕਸ ਹਾਈਲਾਈਟਿੰਗ"
#. i18n: ectx: property (text), widget (QCheckBox, cbShowInputMode)
#: dialogs/statusbarconfigwidget.ui:26
#, fuzzy, kde-format
#| msgid "Use Vi input mode"
msgid "Show input mode"
msgstr "Vi ਇੰਪੁੱਟ ਮੋਡ ਵਰਤੋਂ"
#. i18n: ectx: property (text), widget (QCheckBox, cbShowActiveDictionary)
#: dialogs/statusbarconfigwidget.ui:33
#, fuzzy, kde-format
#| msgid "Change Dictionary..."
msgid "Show active dictionary"
msgstr "ਡਿਕਸ਼ਨਰੀ ਬਦਲੋ..."
#. i18n: ectx: property (text), widget (QCheckBox, cbShowTabSetting)
#: dialogs/statusbarconfigwidget.ui:40
#, fuzzy, kde-format
#| msgid "Show Tabs As"
msgid "Show tab setting"
msgstr "ਟੈਬ ਵੇਖਾਓ ਵਜੋਂ"
#. i18n: ectx: property (text), widget (QCheckBox, cbShowLineColumn)
#: dialogs/statusbarconfigwidget.ui:47
#, fuzzy, kde-format
#| msgid "Show &Line Numbers"
msgid "Show line column"
msgstr "ਲਾਈਨ ਨੰਬਰ ਵੇਖੋ(&L)"
#. i18n: ectx: property (text), widget (QCheckBox, cbShowEncoding)
#: dialogs/statusbarconfigwidget.ui:54
#, fuzzy, kde-format
#| msgid "Broken Encoding"
msgid "Show File Encoding"
msgstr "ਖ਼ਰਾਬ ਇੰਕੋਡਿੰਗ"
#. i18n: ectx: property (text), widget (QCheckBox, cbShowEOL)
#: dialogs/statusbarconfigwidget.ui:61
#, kde-format
msgid "Show Line Ending Type"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: dialogs/textareaappearanceconfigwidget.ui:28
#, fuzzy, kde-format
#| msgid "Editor Plugins"
msgid "Editor font:"
msgstr "ਐਡੀਟਰ ਪਲੱਗਇਨ"
#. i18n: ectx: property (text), widget (QLabel, lblLineHeight)
#: dialogs/textareaappearanceconfigwidget.ui:48
#, kde-format
msgid "&Line Height Multiplier:"
msgstr ""
#. i18n: ectx: property (toolTip), widget (QDoubleSpinBox, spbLineHeightMultiplier)
#: dialogs/textareaappearanceconfigwidget.ui:58
#, kde-format
msgid ""
"This value will be multiplied with the font's default line height. A value "
"of 1.0 means that the default height will be used."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label)
#: dialogs/textareaappearanceconfigwidget.ui:93
#, fuzzy, kde-format
#| msgid "Ignore white space changes"
msgid "Show whitespace indicators:"
msgstr "ਖਾਲੀ ਥਾਂ ਬਦਲਾਅ ਅਣਡਿੱਠਾ"
#. i18n: ectx: property (text), item, widget (QComboBox, spacesComboBox)
#: dialogs/textareaappearanceconfigwidget.ui:109
#, fuzzy, kde-format
#| msgctxt "short translation please"
#| msgid "Sets the end of line mode."
msgid "At the end of a line"
msgstr "ਲਾਈਨ ਦਾ ਅੰਤ ਸੈੱਟ ਕਰਦਾ ਹੈ।"
#. i18n: ectx: property (text), item, widget (QComboBox, spacesComboBox)
#: dialogs/textareaappearanceconfigwidget.ui:114
#, kde-format
msgid "Always"
msgstr "ਹਮੇਸ਼ਾ"
#. i18n: ectx: property (text), widget (QLabel, lbMarkerDescription)
#: dialogs/textareaappearanceconfigwidget.ui:122
#, fuzzy, kde-format
#| msgid "Whitespace Highlighting"
msgid "Whitespace indicator si&ze:"
msgstr "ਖਾਲੀ ਥਾਂ ਹਾਈਲਾਈਟ"
#. i18n: ectx: property (whatsThis), widget (QSlider, sliSetMarkerSize)
#: dialogs/textareaappearanceconfigwidget.ui:138
#, kde-format
msgid "Size of the visible highlight marker."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: dialogs/textareaappearanceconfigwidget.ui:166
#, fuzzy, kde-format
#| msgid "Show Folding &Markers"
msgid "Show &tab indicators:"
msgstr "ਫੋਲਡਿੰਗ ਮਾਰਕਰ ਵੇਖੋ(&M)"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkShowTabs)
#: dialogs/textareaappearanceconfigwidget.ui:176
#, kde-format
msgid ""
"The editor will display a symbol to indicate the presence of a tab in the "
"text."
msgstr "ਐਡੀਟਰ ਟੈਕਸਟ ਵਿੱਚ ਟੈਬ ਦੀ ਮੌਜੂਦਗੀ ਦਰਸਾਉਣ ਲਈ ਇੱਕ ਨਿਸ਼ਾਨ ਦੀ ਵਰਤੋਂ ਕਰੇਗਾ।"
#. i18n: ectx: property (text), widget (QLabel, label_4)
#: dialogs/textareaappearanceconfigwidget.ui:202
#, fuzzy, kde-format
#| msgid "Bracket highlight:"
msgid "Bracket matching:"
msgstr "ਬਰੈਕਟ ਹਾਈਲਾਈਟ:"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkShowWholeBracketExpression)
#: dialogs/textareaappearanceconfigwidget.ui:209
#, kde-format
msgid ""
"If this is enabled, the range between the selected matching brackets will be "
"highlighted."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkShowWholeBracketExpression)
#: dialogs/textareaappearanceconfigwidget.ui:212
#, kde-format
msgid "Highlight range between selected brackets"
msgstr "ਚੁਣੀਆਂ ਬਰੈਕਟਾਂ ਵਿੱਚ ਹਾਈਲਾਈਟਿੰਗ ਰੇਜ਼"
#. i18n: ectx: property (toolTip), widget (QCheckBox, chkShowBracketMatchPreview)
#: dialogs/textareaappearanceconfigwidget.ui:219
#, kde-format
msgid "Show the matching open bracket and lines adjacent to it for context"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkShowBracketMatchPreview)
#: dialogs/textareaappearanceconfigwidget.ui:222
#, kde-format
msgid ""
"If this is enabled, a preview of the lines near a matching open bracket is "
"shown. This can help in quickly determining the context of a closing "
"bracket, especially in long function/class declarations and deeply nested if "
"blocks"
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkShowBracketMatchPreview)
#: dialogs/textareaappearanceconfigwidget.ui:225
#, fuzzy, kde-format
#| msgid "Print the current document."
msgid "Show preview of matching open bracket"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਛਾਪੋ।"
#. i18n: ectx: property (toolTip), widget (QCheckBox, chkAnimateBracketMatching)
#: dialogs/textareaappearanceconfigwidget.ui:232
#, fuzzy, kde-format
#| msgid "Select to Matching Bracket"
msgid "Flash matching brackets"
msgstr "ਮਿਲਦੀ ਬਰੈਕਟ ਚੁਣੋ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkAnimateBracketMatching)
#: dialogs/textareaappearanceconfigwidget.ui:235
#, kde-format
msgid ""
"If this is enabled, matching brackets are animated for better visibility."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkAnimateBracketMatching)
#: dialogs/textareaappearanceconfigwidget.ui:238
#, kde-format
msgid "Flash matching bracket when cursor moves to other bracket in pair"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label_6)
#: dialogs/textareaappearanceconfigwidget.ui:261
#, kde-format
msgid "Counts:"
msgstr ""
#. i18n: ectx: property (toolTip), widget (QCheckBox, chkShowWordCount)
#: dialogs/textareaappearanceconfigwidget.ui:268
#, kde-format
msgid "Show/hide word count in status bar"
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkShowWordCount)
#: dialogs/textareaappearanceconfigwidget.ui:271 view/katestatusbar.cpp:258
#, fuzzy, kde-format
#| msgid "Not word boundary"
msgid "Show word count"
msgstr "ਕੋਈ ਸ਼ਬਦ ਸੀਮਾ ਨਹੀਂ"
#. i18n: ectx: property (toolTip), widget (QCheckBox, chkShowLineCount)
#: dialogs/textareaappearanceconfigwidget.ui:278
#, kde-format
msgid "Show/hide line count in status bar"
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkShowLineCount)
#: dialogs/textareaappearanceconfigwidget.ui:281 view/katestatusbar.cpp:255
#, fuzzy, kde-format
#| msgid "Show &Line Numbers"
msgid "Show line count"
msgstr "ਲਾਈਨ ਨੰਬਰ ਵੇਖੋ(&L)"
#. i18n: ectx: property (text), widget (QLabel, label_25)
#: dialogs/textareaappearanceconfigwidget.ui:304
#, fuzzy, kde-format
#| msgid "End of line"
msgid "Fold first line:"
msgstr "ਲਾਈਨ ਦਾ ਅੰਤ"
#. i18n: ectx: property (toolTip), widget (QCheckBox, chkFoldFirstLine)
#: dialogs/textareaappearanceconfigwidget.ui:317
#, kde-format
msgid ""
"When this setting is enabled, the editor view automatically folds\n"
"comment blocks that start on the first line of the document. This is\n"
"helpful to hide license headers which are commonly placed at the\n"
"beginning of a file."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, cbxWordWrap)
#: dialogs/textareaappearanceconfigwidget.ui:337
#, fuzzy, kde-format
#| msgid "&Dynamic Word Wrap"
msgid "Dynamic Word Wrap:"
msgstr "ਸਫਰੀ ਸ਼ਬਦ ਸਮੇਟੋ(&D)"
#. i18n: ectx: property (text), widget (QCheckBox, chkDynWrapAtStaticMarker)
#: dialogs/textareaappearanceconfigwidget.ui:344
#, fuzzy, kde-format
#| msgid "Enable static &word wrap"
msgid "Wrap dynamically at static word wrap marker"
msgstr "ਸਥਿਰ ਸ਼ਬਦ ਸਮੇਟਣਾ ਯੋਗ(&w)"
#. i18n: ectx: property (text), widget (QCheckBox, chkDynWrapAnywhere)
#: dialogs/textareaappearanceconfigwidget.ui:351
#, kde-format
msgid "Disregard word boundaries for dynamic wrapping"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblDynamicWordWrapIndicators)
#: dialogs/textareaappearanceconfigwidget.ui:358
#, fuzzy, kde-format
#| msgid "Dynamic Word Wrap Indicators"
msgid "D&ynamic word wrap indicators:"
msgstr "ਸਫਰੀ ਸ਼ਬਦ ਸਮੇਟੋ ਸੰਕੇਤਕ"
#. i18n: ectx: property (whatsThis), widget (QComboBox, cmbDynamicWordWrapIndicator)
#: dialogs/textareaappearanceconfigwidget.ui:368
#, kde-format
msgid "Choose when the Dynamic Word Wrap Indicators should be displayed."
msgstr "ਚੁਣੋ ਕਿ ਕਦੋਂ ਸਫ਼ਰੀ ਸ਼ਬਦ ਸਮੇਟਣ ਸੂਚਕ ਨੂੰ ਵਿਖਾਇਆ ਜਾਵੇ।"
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: dialogs/textareaappearanceconfigwidget.ui:391
#, fuzzy, kde-format
#| msgid "Indentation Properties"
msgid "I&ndent wrapped lines:"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰੀ ਵਿਸ਼ੇਸ਼ਤਾ"
#. i18n: ectx: property (text), widget (QLabel, lblDynamicWordWrapIndicators_2)
#: dialogs/textareaappearanceconfigwidget.ui:408
#, fuzzy, kde-format
#| msgid "Indentation width:"
msgid "&Don't indent lines wider than:"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ ਚੌੜਾਈ:"
#. i18n: ectx: property (whatsThis), widget (QSpinBox, sbDynamicWordWrapDepth)
#: dialogs/textareaappearanceconfigwidget.ui:424
#, no-c-format, kde-format
msgid ""
" Enables the start of dynamically wrapped lines to be aligned vertically "
"to the indentation level of the first line. This can help to make code and "
"markup more readable. Additionally, this allows you to set a maximum "
"width of the screen, as a percentage, after which dynamically wrapped lines "
"will no longer be vertically aligned. For example, at 50%, lines whose "
"indentation levels are deeper than 50% of the width of the screen will not "
"have vertical alignment applied to subsequent wrapped lines. If enabled, line numbers will be printed on the left side of the page(s)."
" ਜੇਕਰ ਯੋਗ ਕੀਤਾ ਤਾਂ ਸਫ਼ੇ ਦੇ ਖੱਬੇ ਪਾਸੇ ਲਾਈਨ ਗਿਣਤੀ ਵੀ ਪਰਿੰਟ ਜਾਵੇਗੀ। Print a box displaying typographical conventions for the document type, "
"as defined by the syntax highlighting being used. Format of the page header. The following tags are supported: ਸਫ਼ਾ ਹੈੱਡਰ ਦਾ ਫਾਰਮੈਟ ਹੈ। ਹੇਠ ਦਿੱਤੇ ਟੈਗ ਸਹਾਇਕ ਹਨ: Format of the page footer. The following tags are supported: ਸਫ਼ਾ ਫੁੱਟਰ ਦਾ ਫਾਰਮੈਟ ਹੈ। ਹੇਠ ਦਿੱਤੇ ਟੈਗ ਸਹਾਇਕ ਹਨ: If enabled, the background color of the editor will be used."
#| "p> This may be useful if your color scheme is designed for a dark "
#| "background. If enabled, the background color of the editor will be used. This "
"may be useful if your color theme is designed for a dark background. ਜੇਕਰ ਯੋਗ ਕੀਤਾ ਤਾਂ ਸੰਪਾਦਕ ਦਾ ਬੈਕਗਰਾਊਂਡ ਰੰਗ ਵਰਤਿਆ ਜਾਵੇਗਾ। ਇਹ ਤਾਂ ਲਾਭਦਾਇਕ ਹੈ, "
"ਜੇਕਰ ਤੁਹਾਡੀ ਰੰਗ ਸਕੀਮ ਨੂੰ ਇੱਕ ਗੂੜੀ ਬੈਕਗਰਾਊਂਡ ਲਈ ਵਰਤਿਆ ਹੋਵੇ। If enabled, a box as defined in the properties below will be drawn around "
"the contents of each page. The Header and Footer will be separated from the "
"contents with a line as well. This word was considered to be an \"unknown word\" because it does "
"not match any entry in the dictionary currently in use. It may also be a "
"word in a foreign language. If the word is not misspelled, you may add it to the dictionary by "
"clicking Add to Dictionary. If you do not want to add the unknown "
"word to the dictionary, but you want to leave it unchanged, click Ignore"
"b> or Ignore All. However, if the word is misspelled, you can try to find the correct "
"replacement in the list below. If you cannot find a replacement there, you "
"may type it in the text box below, and click Replace or Replace "
"All. ਇਹ ਸ਼ਬਦ \"ਅਣਜਾਣ ਸ਼ਬਦ\" ਮੰਨਿਆ ਗਿਆ ਹੈ, ਕਿਉਂਕਿ ਇਸ ਸ਼ਬਦ-ਕੋਸ਼ ਵਿੱਚ ਇਸ ਦਾ ਕੋਈ ਇੰਦਰਾਜ਼ "
"ਨਹੀ ਹੈ। ਇਹ ਕਿਸੇ ਵਿਦੇਸ਼ੀ ਭਾਸ਼ਾ ਦਾ ਸ਼ਬਦ ਵੀ ਹੋ ਸਕਦਾ ਹੈ। ਜੇਕਰ ਸ਼ਬਦ ਦਾ ਸ਼ਬਦ-ਜੋੜ ਗਲਤ ਨਹੀ ਹੈ, ਤਾਂ ਇਸ ਨੂੰ ਸ਼ਬਦ-ਕੋਸ਼ ਵਿੱਚ ਸ਼ਾਮਲ ਕਰ ਸਕਦੇ ਹੋ ਸ਼ਬਦ-ਕੋਸ਼ "
"ਵਿੱਚ ਜੋੜੋ ਨੂੰ ਦਬਾਉਣ ਨਾਲ। ਜੇਕਰ ਤੁਸੀਂ ਇਸ ਨੂੰ ਸ਼ਬਦ-ਕੋਸ਼ ਵਿੱਚ ਸ਼ਾਮਲ ਨਹੀ ਕਰਨਾ ਚਾਹੁੰਦੇ "
"ਅਣਡਿੱਠਾ ਜਾਂ ਸਾਰੇ ਅਣਡਿੱਠੇ ਕਰਨ ਇਸ ਨੂੰ ਇਸ ਤਰਾਂ ਹੀ ਛੱਡ ਸਕਦੇ ਹੋ। ਪਰ, ਜੇਕਰ ਇਹ ਸ਼ਬਦ ਦਾ ਸ਼ਬਦ-ਜੋੜ ਗਲਤ ਹੈ ਤਾਂ ਤੁਸੀਂ ਇਸ ਨੂੰ ਹੇਠ ਦਿੱਤੀ ਲਿਸਟ ਵਿੱਚਲੇ ਸ਼ਬਦਾਂ ਨਾਲ "
"ਤਬਦੀਲ ਕਰ ਸਕਦੇ ਹੋ। ਜੇਕਰ ਕੋਈ ਤਬਦੀਲਯੋਗ ਸ਼ਬਦ ਉਥੇ ਨਹੀ ਹੈ ਤਾਂ ਤੁਸੀ ਇਸ ਨੂੰ ਲਿਖ ਵੀ ਸਕਦੇ ਹੋ ਤੇ ਇਸ "
"ਉਪਰੰਤ ਤਬਦੀਲ ਜਾਂ ਸਾਰੇ ਤਬਦੀਲ All ਬਟਨ ਦਬਾਓ। The unknown word was detected and considered unknown because it is not "
"included in the dictionary. ਅਣਜਾਣ ਅੱਖਰ ਖੋਜਿਆ ਗਿਆ ਹੈ ਅਤੇ ਇਸ ਨੂੰ ਅਣਪਛਾਤਾ ਹੀ ਮੰਨਿਆ ਗਿਆ ਹੈ, ਕਿਉਕਿ ਇਹ ਸ਼ਬਦ-ਕੋਸ਼ ਵਿੱਚ "
"ਸ਼ਾਮਲ ਨਹੀ ਹੈ। If the unknown word is misspelled, you should type the correction for "
"your misspelled word here or select it from the list below. You can then click Replace if you want to correct only this "
"occurrence of the word or Replace All if you want to correct all "
"occurrences. ਜੇਕਰ ਅਣਪਛਾਤੇ ਸ਼ਬਦ ਦਾ ਗਲਤ ਸ਼ਬਦ-ਜੋੜ ਹੈ, ਤਾਂ ਤੁਹਾਨੂੰ ਸਹੀ ਇਥੇ ਲਿਖਣਾ ਚਾਹੀਦਾ ਹੈ ਜਾਂ ਲਿਸਟ ਵਿੱਚੋਂ "
"ਚੁਣੋ। ਤੁਸੀਂ ਤਬਦੀਲ ਨੂੰ ਵੀ ਦਬਾ ਸਕਦੇ ਹੋ। ਇਸ ਨਾਲ ਤੁਸੀਂ ਸਿਰਫ ਇੱਕ ਮੌਜੂਦਗੀ ਤਬਦੀਲੀ ਕਰਨੀ ਹੈ, "
"ਜਾਂ ਸਭ ਤਬਦੀਲ ਨਾਲ ਸਾਰੀਆਂ ਮੌਜੂਦਗੀਆਂ ਤਬਦੀਲ ਕਰ ਸਕਦੇ ਹੋ। Click here to replace this occurrence of the unknown text with the text "
"in the edit box above (to the left). ਉੱਪਰਲੇ ਸੋਧ ਬਕਸੇ(ਖੱਬੇ ਪਾਸੇ) ਵਿਚਲੇ ਟੈਕਸਟ ਨਾਲ ਅਣਪਛਾਤਾ ਟੈਕਸਟ ਦੀ ਇਸ ਮੌਜੂਦਗੀ ਨੂੰ ਤਬਦੀਲ ਕਰਨ ਲਈ "
"ਇਥੇ ਦਬਾਉ। Click here to let this occurrence of the unknown word remain as is. This action is useful when the word is a name, an acronym, a foreign word "
"or any other unknown word that you want to use but not add to the dictionary."
" ਇਸ ਅਣਪਛਾਤੇ ਸ਼ਬਦ ਦੀ ਮੌਜੂਦਗੀ ਨੂੰ ਇਸਤਰਾਂ ਰੱਖਣ ਲਈ ਇਸ ਨੂੰ ਦਬਾਉ। ਇਹ ਕਾਰਵਾਈ ਤਾਂ ਲਾਭਦਾਇਕ ਹੈ ਤਾਂ ਜੇਕਰ ਸ਼ਬਦ ਇੱਕ ਨਾਂ ਹੈ, ਇੱਕ ਵਿਦੇਸ਼ੀ ਅੱਖਰ ਹੈ ਜਾਂ ਕੋਈ ਵੱਖਰਾ ਸ਼ਬਦ "
"ਹੈ, ਜੋ ਕਿ ਤੁਸੀਂ ਵਰਤਣਾ ਚਾਹੋ, ਪਰ ਸ਼ਬਦ-ਕੋਸ਼ ਵਿੱਚ ਸ਼ਾਮਲ ਨਹੀ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ। Select the language of the document you are proofing here. ਡੌਕੂਮੈਂਟ ਦੀ ਭਾਸ਼ਾ, ਜਿਸ ਵਿੱਚ ਪੜਚੋਲ ਕਰ ਰਹੇ ਹੋ Click here to let all occurrences of the unknown word remain as they are."
" This action is useful when the word is a name, an acronym, a foreign word "
"or any other unknown word that you want to use but not add to the dictionary."
" ਸਾਰੇ ਅਣਪਛਾਤੇ ਅੱਖਰਾਂ ਦੀ ਮੌਜੂਦਗੀ ਇਸੇਤਰਾਂ ਹੀ ਰਹਿਣ ਦਿਓ। ਇਹ ਕਾਰਵਾਈ ਤਾਂ ਲਾਭਦਾਇਕ ਹੈ, ਜੇਕਰ ਸ਼ਬਦ ਇੱਕ ਨਾਂ, ਇੱਕ ਵਿਦੇਸ਼ੀ ਸ਼ਬਦ ਜਾਂ ਇੱਕ ਅਣਪਛਾਤਾ ਅੱਖਰ ਜੋ "
"ਕਿ ਤੁਸੀ ਵਰਤਣਾ ਤਾਂ ਚਾਹੁੰਦੇ ਹੋ, ਪਰ ਸ਼ਬਦ-ਕੋਸ਼ ਵਿੱਚ ਸ਼ਾਮਲ ਨਹੀ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ। Click here to replace all occurrences of the unknown text with the text "
"in the edit box above (to the left). ਉੱਪਰਲੇ ਸੋਧ ਬਕਸੇ(ਖੱਬੇ ਪਾਸੇ) ਵਿਚਲੇ ਟੈਕਸਟ ਨਾਲ ਅਣਪਛਾਤਾ ਟੈਕਸਟ ਦੀ ਸਾਰੀ ਮੌਜੂਦਗੀ ਨੂੰ ਤਬਦੀਲ ਕਰਨ "
"ਲਈ ਇਥੇ ਦਬਾਓ। Sets the background color of the editing area. ਸੰਪਾਦਨ ਖੇਤਰ ਦੀ ਬੈਕਗਰਾਊਂਡ ਦਾ ਰੰਗ ਦਿਓ। Sets the background color of the selection. To set the text color "
"for selected text, use the "Configure Highlighting" dialog."
" Sets the background color of the currently active line, which means the "
"line where your cursor is positioned. Sets the background color of the editing area. Sets the background color of search results. ਸੰਪਾਦਨ ਖੇਤਰ ਦੀ ਬੈਕਗਰਾਊਂਡ ਦਾ ਰੰਗ ਦਿਓ। Sets the background color of the editing area. Sets the background color of replaced text. ਸੰਪਾਦਨ ਖੇਤਰ ਦੀ ਬੈਕਗਰਾਊਂਡ ਦਾ ਰੰਗ ਦਿਓ। Sets the background color of the editing area. Sets the background color of the icon border. ਸੰਪਾਦਨ ਖੇਤਰ ਦੀ ਬੈਕਗਰਾਊਂਡ ਦਾ ਰੰਗ ਦਿਓ। This icon will be displayed in the menu and toolbar. This color will be used to draw the line numbers (if enabled). ਇਹ ਆਈਕਾਨ ਮੇਨੂ ਅਤੇ ਟੂਲਬਾਰ ਵਿੱਚ ਦਿੱਸੇਗਾ। This icon will be displayed in the menu and toolbar. This color will be used to draw the number of the current line (if "
"enabled). ਇਹ ਆਈਕਾਨ ਮੇਨੂ ਅਤੇ ਟੂਲਬਾਰ ਵਿੱਚ ਦਿੱਸੇਗਾ। This color will be used to draw the line between line numbers and the "
"icon borders, if both are enabled. Sets the color of Word Wrap-related markers: Sets the background color of the editing area. Sets the color of the code folding bar. ਸੰਪਾਦਨ ਖੇਤਰ ਦੀ ਬੈਕਗਰਾਊਂਡ ਦਾ ਰੰਗ ਦਿਓ। Sets the color of the tabulator marks. Sets the color of the line modification marker for modified lines. ਟੇਬਲ-ਰੂਪ ਨਿਸ਼ਾਨ ਦਾ ਰੰਗ ਦਿਓ: Sets the color of the tabulator marks. Sets the color of the line modification marker for saved lines. ਟੇਬਲ-ਰੂਪ ਨਿਸ਼ਾਨ ਦਾ ਰੰਗ ਦਿਓ: Sets the color of the tabulator marks. Sets the color of the line that is used to indicate spelling mistakes. ਟੇਬਲ-ਰੂਪ ਨਿਸ਼ਾਨ ਦਾ ਰੰਗ ਦਿਓ: Sets the color of the tabulator marks. ਟੇਬਲ-ਰੂਪ ਨਿਸ਼ਾਨ ਦਾ ਰੰਗ ਦਿਓ: Sets the color of the tabulator marks. Sets the color of the vertical indentation lines. ਟੇਬਲ-ਰੂਪ ਨਿਸ਼ਾਨ ਦਾ ਰੰਗ ਦਿਓ: Sets the bracket matching color. This means, if you place the cursor e.g. "
"at a (, the matching ) will be highlighted with this color. Sets the background color of mark type. Note: The marker "
"color is displayed lightly because of transparency. This list displays the default styles for the current color theme and "
"offers the means to edit them. The style name reflects the current style "
"settings. To edit the colors, click the colored squares, or select the "
"color to edit from the popup menu. You can unset the Background and "
"Selected Background colors from the popup menu when appropriate. This list displays the contexts of the current syntax highlight mode and "
"offers the means to edit them. The context name reflects the current style "
"settings. To edit using the keyboard, press <SPACE>"
"strong> and choose a property from the popup menu. To edit the colors, "
"click the colored squares, or select the color to edit from the popup menu."
"p> You can unset the Background and Selected Background colors from the "
"context menu when appropriate. The theme \"%1\" already exists. Please choose a different theme "
"name. indent Indents the selected lines or the current line unindent Unindents the selected lines or current line. cleanindent Cleans up the indentation of the selected lines or "
"current line according to the indentation settings in the document. comment Inserts comment markers to make the selection or selected "
"lines or current line a comment according to the text format as defined by "
"the syntax highlight definition for the document. uncomment Removes comment markers from the selection or selected "
"lines or current line according to the text format as defined by the syntax "
"highlight definition for the document. goto line number This command navigates to the specified "
"line number. set-indent-pasted-text enable If enabled, indentation of "
"text pasted from the clipboard is adjusted using the current indenter."
"p> Possible true values: 1 on true set-tab-width width Sets the tab width to the number "
"width set-replace-tab enable If enabled, tabs are replaced with "
"spaces as you type. Possible true values: 1 on true set-show-tabs enable If enabled, TAB characters and trailing "
"whitespace will be visualized by a small dot. Possible true values: 1 "
"on true set-remove-trailing-spaces mode Removes the trailing spaces "
"in the document depending on the mode. Possible values:"
"
The marks show "
#| "bookmarks, for instance."
msgid ""
"If this option is checked, every new view will display marks for folding."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkShowFoldingMarkers)
#: dialogs/bordersappearanceconfigwidget.ui:35
#, kde-format
msgid "Show arrows to collapse code blocks"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkShowFoldingPreview)
#: dialogs/bordersappearanceconfigwidget.ui:42
#, fuzzy, kde-format
#| msgid ""
#| "Show/hide the marks on the vertical scrollbar.
The marks show "
#| "bookmarks, for instance."
msgid ""
"If checked, hovering over a folded region shows a preview of the folded text "
"in a popup."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkShowFoldingPreview)
#: dialogs/bordersappearanceconfigwidget.ui:45
#, fuzzy, kde-format
#| msgid "Print the current document."
msgid "Show preview of folded blocks on hover"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਛਾਪੋ।"
#. i18n: ectx: property (text), widget (QLabel, label_6)
#: dialogs/bordersappearanceconfigwidget.ui:52
#, kde-format
msgid "Folding arrows visibility:"
msgstr ""
#. i18n: ectx: property (text), item, widget (QComboBox, cmbFoldingArrowVisiblity)
#: dialogs/bordersappearanceconfigwidget.ui:63
#, fuzzy, kde-format
#| msgid "Show &Icon Border"
msgid "Show on Hover"
msgstr "ਆਈਕਾਨ ਬਾਰਡਰ ਵੇਖੋ(&I)"
#. i18n: ectx: property (text), item, widget (QComboBox, cmbFoldingArrowVisiblity)
#: dialogs/bordersappearanceconfigwidget.ui:68
#, fuzzy, kde-format
#| msgid "Always"
msgid "Show Always"
msgstr "ਹਮੇਸ਼ਾ"
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: dialogs/bordersappearanceconfigwidget.ui:92
#, kde-format
msgid "Left side:"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkIconBorder)
#: dialogs/bordersappearanceconfigwidget.ui:99
#, kde-format
msgid ""
"
The marks show "
#| "bookmarks, for instance."
msgid ""
"
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkScrollbarPreview)
#: dialogs/bordersappearanceconfigwidget.ui:162
#, fuzzy, kde-format
#| msgid ""
#| "Show/hide the marks on the vertical scrollbar.
The marks show "
#| "bookmarks, for instance."
msgid ""
"
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkScrollbarPreview)
#: dialogs/bordersappearanceconfigwidget.ui:165
#, fuzzy, kde-format
#| msgid "Print the current document."
msgid "Show preview when hovering over scrollbar"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਛਾਪੋ।"
#. i18n: ectx: property (text), widget (QLabel, lblShowScrollbars)
#: dialogs/bordersappearanceconfigwidget.ui:172
#, kde-format
msgid "Scro&llbars visibility:"
msgstr ""
#. i18n: ectx: property (text), item, widget (QComboBox, cmbShowScrollbars)
#: dialogs/bordersappearanceconfigwidget.ui:183 dialogs/katedialogs.cpp:749
#, kde-format
msgid "Always On"
msgstr "ਹਮੇਸ਼ਾ ਚਾਲੂ"
#. i18n: ectx: property (text), item, widget (QComboBox, cmbShowScrollbars)
#: dialogs/bordersappearanceconfigwidget.ui:188
#, kde-format
msgid "Show When Needed"
msgstr ""
#. i18n: ectx: property (text), item, widget (QComboBox, cmbShowScrollbars)
#: dialogs/bordersappearanceconfigwidget.ui:193
#, kde-format
msgid "Always Off"
msgstr "ਹਮੇਸ਼ਾ ਬੰਦ"
#. i18n: ectx: property (text), widget (QLabel, label_4)
#: dialogs/bordersappearanceconfigwidget.ui:217
#, fuzzy, kde-format
#| msgid "Tab width"
msgid "Minimap:"
msgstr "ਟੈਬ ਚੌੜਾਈ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkScrollbarMiniMap)
#: dialogs/bordersappearanceconfigwidget.ui:224
#, fuzzy, kde-format
#| msgid ""
#| "Show/hide the marks on the vertical scrollbar.
The marks show "
#| "bookmarks, for instance."
msgid ""
"If this option is checked, every new view will show a mini map on the "
"vertical scrollbar."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkScrollbarMiniMap)
#: dialogs/bordersappearanceconfigwidget.ui:227
#, fuzzy, kde-format
#| msgid "Show &scrollbar marks"
msgid "Show minimap"
msgstr "ਸਕਰੋਲ ਨਿਸ਼ਾਨ ਵੇਖੋ(&s)"
#. i18n: ectx: property (text), widget (QLabel, labelMiniMapWidth)
#: dialogs/bordersappearanceconfigwidget.ui:250
#, fuzzy, kde-format
#| msgid "Tab width"
msgid "Minim&ap width:"
msgstr "ਟੈਬ ਚੌੜਾਈ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkScrollbarMiniMapAll)
#: dialogs/bordersappearanceconfigwidget.ui:263
#, fuzzy, kde-format
#| msgid ""
#| "Show/hide the marks on the vertical scrollbar.
The marks show "
#| "bookmarks, for instance."
msgid ""
"If this option is checked, every new view will show a mini map of the whole "
"document on the vertical scrollbar."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkScrollbarMiniMapAll)
#: dialogs/bordersappearanceconfigwidget.ui:266
#, fuzzy, kde-format
#| msgid "Save the current document"
msgid "Map the whole document"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਸੰਭਾਲੋ"
#. i18n: ectx: property (whatsThis), widget (QRadioButton, rbSortBookmarksByCreation)
#: dialogs/bordersappearanceconfigwidget.ui:276
#, kde-format
msgid ""
"Each new bookmark will be added to the bottom, independently from where it "
"is placed in the document."
msgstr ""
#. i18n: ectx: property (text), widget (QRadioButton, rbSortBookmarksByCreation)
#: dialogs/bordersappearanceconfigwidget.ui:279
#, kde-format
msgid "By date created"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QRadioButton, rbSortBookmarksByPosition)
#: dialogs/bordersappearanceconfigwidget.ui:286
#, kde-format
msgid "The bookmarks will be ordered by the line numbers they are placed at."
msgstr "ਬੁੱਕਮਾਰਕਾਂ ਨੂੰ ਉਸ ਲਾਈਨ ਅੰਕ ਦੇ ਅਧਾਰ 'ਤੇ ਰੱਖਿਆ ਜਾਵੇਗਾ, ਜਿੱਥੇ ਉਹਨਾਂ ਨੂੰ ਰੱਖਿਆ ਗਿਆ ਹੈ।"
#. i18n: ectx: property (text), widget (QRadioButton, rbSortBookmarksByPosition)
#: dialogs/bordersappearanceconfigwidget.ui:289
#, fuzzy, kde-format
#| msgid "Show &line numbers"
msgid "By line number"
msgstr "ਲਾਈਨ ਨੰਬਰ ਵੇਖੋ(&l)"
#. i18n: ectx: property (text), widget (QLabel, label_5)
#: dialogs/bordersappearanceconfigwidget.ui:296
#, fuzzy, kde-format
#| msgid "Sort Bookmarks Menu"
msgid "Sort bookmarks menu:"
msgstr "ਬੁੱਕਮਾਰਕ ਮੇਨੂ ਲੜੀਬੱਧ"
#: dialogs/clipboardhistorydialog.cpp:264
#, fuzzy, kde-format
#| msgid "Select to Next Line"
msgid "Select text to paste."
msgstr "ਅਗਲੀ ਸਤਰ ਤੇ ਜਾਓ"
#: dialogs/clipboardhistorydialog.cpp:296
#, kde-format
msgid "No entries in clipboard history"
msgstr ""
#. i18n: ectx: property (title), widget (QGroupBox, gbGeneral)
#. i18n: ectx: property (title), widget (QGroupBox, gbViInputMode)
#: dialogs/completionconfigtab.ui:29 dialogs/katedialogs.cpp:605
#: dialogs/katedialogs.cpp:737 dialogs/katedialogs.cpp:1026
#: vimode/config/configwidget.ui:29
#, kde-format
msgid "General"
msgstr "ਆਮ"
#. i18n: ectx: property (text), widget (QCheckBox, chkAutoCompletionEnabled)
#: dialogs/completionconfigtab.ui:35
#, fuzzy, kde-format
#| msgid "Auto Completion"
msgid "Enable &auto completion"
msgstr "ਆਟੋ ਮੁਕੰਮਲ"
#. i18n: ectx: property (text), widget (QCheckBox, chkAutoSelectFirstEntry)
#: dialogs/completionconfigtab.ui:42
#, fuzzy, kde-format
#| msgid "&Auto completion enabled"
msgid "Auto select &first completion entry"
msgstr "ਆਟੋ ਮੁਕੰਮਲ ਯੋਗ(&A)"
#. i18n: ectx: property (text), widget (QCheckBox, chkTabCompletion)
#: dialogs/completionconfigtab.ui:49
#, kde-format
msgid "Cycle through the list of completions using Tab / Shift+Tab"
msgstr ""
#. i18n: ectx: property (toolTip), widget (QCheckBox, chkEnterCompletion)
#: dialogs/completionconfigtab.ui:56
#, kde-format
msgid ""
"Pressing enter will insert the text of selected completion item into the "
"editor. If disabled, Tab key or double-click can still be used to trigger "
"completion."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkEnterCompletion)
#: dialogs/completionconfigtab.ui:59
#, kde-format
msgid "Use Enter key to insert selected completion"
msgstr ""
#. i18n: ectx: property (title), widget (QGroupBox, gbWordCompletion)
#: dialogs/completionconfigtab.ui:69
#, fuzzy, kde-format
#| msgid "Auto Word Completion"
msgid "A&uto word completion"
msgstr "ਆਟੋ ਸ਼ਬਦ ਮੁਕੰਮਲ"
#. i18n: ectx: property (text), widget (QLabel, label)
#: dialogs/completionconfigtab.ui:83
#, kde-format
msgid "Minimal word length to complete:"
msgstr "ਪੂਰਾ ਕਰਨ ਲਈ ਘੱਟੋ-ਘੱਟ ਸ਼ਬਦ ਗਿਣਤੀ:"
#. i18n: ectx: property (toolTip), widget (QCheckBox, removeTail)
#: dialogs/completionconfigtab.ui:111
#, kde-format
msgid "Remove tail of a previous word when completion item chosen from a list"
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, removeTail)
#: dialogs/completionconfigtab.ui:114
#, fuzzy, kde-format
#| msgid "Re&move trailing spaces"
msgid "Remove tail on complete"
msgstr "ਅੰਤਮ ਖਾਲੀ ਥਾਂ ਹਟਾਓ(&m)"
#. i18n: ectx: property (text), widget (QLabel, label_4)
#: dialogs/completionconfigtab.ui:121
#, kde-format
msgid ""
"Word completion provides suggestions based on the words found in the document"
msgstr ""
#. i18n: ectx: property (title), widget (QGroupBox, gbKeywordCompletion)
#: dialogs/completionconfigtab.ui:134
#, fuzzy, kde-format
#| msgid "Word Completion"
msgid "&Keyword completion"
msgstr "ਅੱਖਰ ਮੁਕੰਮਲ"
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: dialogs/completionconfigtab.ui:143
#, kde-format
msgid ""
"Keyword completion provides suggestions based on the keywords which exist in "
"the document's language."
msgstr ""
#. i18n: ectx: property (title), widget (QGroupBox, gbShowDoc)
#: dialogs/completionconfigtab.ui:156
#, fuzzy, kde-format
#| msgid "Auto Completion"
msgid "Documentation with completion"
msgstr "ਆਟੋ ਮੁਕੰਮਲ"
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: dialogs/completionconfigtab.ui:165
#, kde-format
msgid ""
"Show documentation beside completion box. If disabled, documentation can be "
"shown by pressing Alt key."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label)
#: dialogs/editconfigwidget.ui:22
#, fuzzy, kde-format
#| msgid "Static Word Wrap"
msgid "Word wrap:"
msgstr "ਸਥਿਰ ਸ਼ਬਦ ਸਮੇਟੋ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkStaticWordWrap)
#: dialogs/editconfigwidget.ui:29
#, kde-format
msgid ""
"
The marks show "
#| "bookmarks, for instance."
msgid ""
"
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#. i18n: ectx: property (text), widget (QCheckBox, chkShowStaticWordWrapMarker)
#: dialogs/editconfigwidget.ui:42
#, kde-format
msgid "&Draw vertical line at the word wrap column"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblWordWrap)
#: dialogs/editconfigwidget.ui:49
#, fuzzy, kde-format
#| msgid "W&rap words at:"
msgid "Wra&p words at:"
msgstr "ਸ਼ਬਦ ਸਮੇਟੋ(&r):"
#. i18n: ectx: property (whatsThis), widget (QSpinBox, sbWordWrap)
#: dialogs/editconfigwidget.ui:59
#, kde-format
msgid ""
"If the Word Wrap option is selected this entry determines the length (in "
"characters) at which the editor will automatically start a new line."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblInputMode)
#: dialogs/editconfigwidget.ui:91
#, fuzzy, kde-format
#| msgid "Default indentation mode:"
msgid "Default input mode:"
msgstr "ਡਿਫਾਲਟ ਨਵਾਂ ਪ੍ਹੈਰਾ ਮੋਡ:"
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: dialogs/editconfigwidget.ui:120
#, fuzzy, kde-format
#| msgid "Auto &brackets"
msgid "Brackets:"
msgstr "ਆਟੋ ਬਰੈਕਟਾਂ(&b)"
#. i18n: ectx: property (text), widget (QCheckBox, chkAutoBrackets)
#: dialogs/editconfigwidget.ui:127
#, kde-format
msgid "Automatically close brackets when opening bracket is typed"
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QLabel, lbEncloseSelection)
#: dialogs/editconfigwidget.ui:140
#, kde-format
msgid ""
"When some text is selected these chars will be added on both its sides in a "
"way \"Auto Bracket\" do"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lbEncloseSelection)
#: dialogs/editconfigwidget.ui:143
#, fuzzy, kde-format
#| msgctxt "suffix for spinbox >1"
#| msgid " characters"
msgid "Enclosing characters:"
msgstr " ਅੱਖਰ"
#. i18n: ectx: property (text), widget (QLabel, label_4)
#: dialogs/editconfigwidget.ui:166
#, fuzzy, kde-format
#| msgid "Roland Pabel"
msgid "Copy and paste:"
msgstr "ਰੋਲੈਂਡ ਪਾਬੀਲ"
#. i18n: ectx: property (text), widget (QCheckBox, chkTextDragAndDrop)
#: dialogs/editconfigwidget.ui:173
#, fuzzy, kde-format
#| msgid "Remove selected"
msgid "Move selected text when dragged"
msgstr "ਚੁਣੇ ਹਟਾਓ"
#. i18n: ectx: property (text), widget (QCheckBox, chkSmartCopyCut)
#: dialogs/editconfigwidget.ui:180
#, fuzzy, kde-format
#| msgid "Copy/Cut the current line if no selection"
msgid "Copy/cut the current line if invoked without any text selected"
msgstr "ਜੇ ਕੋਈ ਚੋਣ ਨਾ ਕੀਤੀ ਗਈ ਹੋਵੇ ਤਾਂ ਮੌਜੂਦਾ ਲਾਈਨ ਕਾਪੀ ਕਰੋ/ਕੱਟੋ"
#. i18n: ectx: property (text), widget (QCheckBox, chkMousePasteAtCursorPosition)
#: dialogs/editconfigwidget.ui:187
#, kde-format
msgid "Don't move the text cursor when pasting by mouse"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblClipboardHistoryEntries)
#: dialogs/editconfigwidget.ui:194
#, fuzzy, kde-format
#| msgid "Clipboard &History"
msgid "Max Clipboard History Entries:"
msgstr "ਕਲਿੱਪਬੋਰਡ ਅਤੀਤ(&H)"
#. i18n: ectx: property (whatsThis), widget (QSpinBox, sbClipboardHistoryEntries)
#: dialogs/editconfigwidget.ui:204
#, kde-format
msgid "This determines the number of entries to keep in the clipboard history"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblBracketHelp)
#: dialogs/editconfigwidget.ui:226
#, kde-format
msgid ""
"When you type these characters while text is selected, they will surround "
"the selected text instead of replacing it."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkAccessibility)
#: dialogs/editconfigwidget.ui:252
#, kde-format
msgid "Enable accessibility notifications"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: dialogs/editconfigwidget.ui:259
#, kde-format
msgid "Accessibility:"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblFiletype)
#: dialogs/filetypeconfigwidget.ui:14
#, kde-format
msgid "&Filetype:"
msgstr "ਫਾਇਲ ਕਿਸਮ(&F):"
#. i18n: ectx: property (whatsThis), widget (QComboBox, cmbFiletypes)
#: dialogs/filetypeconfigwidget.ui:24
#, kde-format
msgid "Select the filetype you want to change."
msgstr "ਫਾਇਲ-ਕਿਸਮ ਚੁਣੋ, ਜਿਸ ਨੂੰ ਤੁਸੀਂ ਬਦਲਣਾ ਚਾਹੁੰਦੇ ਹੋ।"
#. i18n: ectx: property (whatsThis), widget (QPushButton, btnNew)
#: dialogs/filetypeconfigwidget.ui:31
#, kde-format
msgid "Create a new file type."
msgstr "ਨਵੀਂ ਫਾਇਲ ਕਿਸਮ ਬਣਾਓ।"
#. i18n: ectx: property (text), widget (QPushButton, btnNew)
#: dialogs/filetypeconfigwidget.ui:34
#, kde-format
msgid "&New"
msgstr "ਨਵਾਂ(&N)"
#. i18n: ectx: property (whatsThis), widget (QPushButton, btnDelete)
#: dialogs/filetypeconfigwidget.ui:41
#, kde-format
msgid "Delete the current file type."
msgstr "ਮੌਜੂਦਾ ਫਾਇਲ ਕਿਸਮ ਹਟਾਓ।"
#. i18n: ectx: property (text), widget (QPushButton, btnDelete)
#: dialogs/filetypeconfigwidget.ui:44 syntax/katethemeconfig.cpp:1123
#, kde-format
msgid "&Delete"
msgstr "ਹਟਾਓ(&D)"
#. i18n: ectx: property (title), widget (QGroupBox, gbProperties)
#: dialogs/filetypeconfigwidget.ui:66 mode/katemodeconfigpage.cpp:272
#, kde-format
msgid "Properties"
msgstr "ਵਿਸ਼ੇਸ਼ਤਾ"
#. i18n: ectx: property (text), widget (QLabel, lblName)
#: dialogs/filetypeconfigwidget.ui:72
#, kde-format
msgid "&Name:"
msgstr "ਨਾਂ(&N):"
#. i18n: ectx: property (whatsThis), widget (QLineEdit, edtName)
#: dialogs/filetypeconfigwidget.ui:82
#, kde-format
msgid ""
"The name of the filetype will be the text of the corresponding menu item."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblSection)
#: dialogs/filetypeconfigwidget.ui:89
#, kde-format
msgid "&Section:"
msgstr "ਸ਼ੈਕਸ਼ਨ(&S):"
#. i18n: ectx: property (whatsThis), widget (QLineEdit, edtSection)
#: dialogs/filetypeconfigwidget.ui:99
#, kde-format
msgid "The section name is used to organize the file types in menus."
msgstr "ਮੇਨੂ ਵਿੱਚ ਫਾਇਲ ਕਿਸਮਾਂ ਨੂੰ ਇੱਕ ਸਾਰ ਕਰਨ ਲਈ ਸ਼ੈਕਸ਼ਨ ਦਾ ਨਾਂ ਹੈ।"
#. i18n: ectx: property (text), widget (QLabel, lblVariables)
#: dialogs/filetypeconfigwidget.ui:106
#, kde-format
msgid "&Variables:"
msgstr "ਵੇਰੀਬਲ(&V):"
#. i18n: ectx: property (whatsThis), widget (VariableLineEdit, edtVariables)
#: dialogs/filetypeconfigwidget.ui:116
#, kde-format
msgid ""
"*.txt; *.text
. "
"The string is a semicolon-separated list of masks."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblMimeTypes)
#: dialogs/filetypeconfigwidget.ui:166
#, kde-format
msgid "MIME &types:"
msgstr "MIME ਕਿਸਮ(&t):"
#. i18n: ectx: property (whatsThis), widget (QLineEdit, edtMimeTypes)
#: dialogs/filetypeconfigwidget.ui:181
#, kde-format
msgid ""
"The mime type mask allows to select files by mimetype. The string is a "
"semicolon-separated list of mimetypes, for example text/plain; text/"
"english
."
msgstr ""
#. i18n: ectx: property (whatsThis), widget (QToolButton, btnMimeTypes)
#: dialogs/filetypeconfigwidget.ui:188
#, kde-format
msgid "Displays a wizard that helps you easily select mimetypes."
msgstr "ਇੱਕ ਸਹਾਇਕ ਵੇਖਾਏਗਾ, ਜੋ ਕਿ ਤੁਹਾਨੂੰ ਆਸਾਨੀ ਨਾਲ mime ਕਿਸਮ ਚੁਣਨ ਲਈ ਸਹਾਇਕ ਹੈ।"
#. i18n: ectx: property (text), widget (QLabel, lblPriority)
#: dialogs/filetypeconfigwidget.ui:197
#, kde-format
msgid "P&riority:"
msgstr "ਤਰਜੀਹ(&r):"
#. i18n: ectx: property (whatsThis), widget (QSpinBox, sbPriority)
#: dialogs/filetypeconfigwidget.ui:207
#, kde-format
msgid ""
"Sets priority for this file type. If more than one file type selects the "
"same file, the one with the highest priority will be used."
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, lblMode)
#: dialogs/indentationconfigwidget.ui:43
#, kde-format
msgid "Default indentation mode:"
msgstr "ਡਿਫਾਲਟ ਨਵਾਂ ਪ੍ਹੈਰਾ ਮੋਡ:"
#. i18n: ectx: property (whatsThis), widget (QComboBox, cmbMode)
#: dialogs/indentationconfigwidget.ui:53
#, kde-format
msgid ""
"This is a list of available indentation modes. The specified indentation "
"mode will be used for all new documents. Be aware that it is also possible "
"to set the indentation mode with document variables, modes or a .kateconfig "
"file."
msgstr ""
#. i18n: ectx: property (title), widget (QGroupBox, gbIndentationMode)
#: dialogs/indentationconfigwidget.ui:75
#, fuzzy, kde-format
#| msgid "Indentation"
msgid "Indent using"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ"
#. i18n: ectx: property (whatsThis), widget (QSpinBox, sbIndentWidth)
#: dialogs/indentationconfigwidget.ui:81
#, kde-format
msgid ""
"The indentation width is the number of spaces which is used to indent a "
"line. If the option Insert spaces instead of tabulators in the "
"section Editing is disabled, a Tab character is inserted if "
"the indentation is divisible by the tab width."
msgstr ""
#. i18n: ectx: property (text), widget (QRadioButton, rbIndentWithSpaces)
#: dialogs/indentationconfigwidget.ui:97
#, kde-format
msgid "&Spaces"
msgstr "ਖਾਲੀ ਥਾਂ(&S)"
#. i18n: ectx: property (text), widget (QLabel, lblIndentWidth)
#: dialogs/indentationconfigwidget.ui:104
#, fuzzy, kde-format
#| msgid "Indentation width:"
msgid "&Indentation width:"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ ਚੌੜਾਈ:"
#. i18n: ectx: property (text), widget (QLabel, lblTabWidth)
#: dialogs/indentationconfigwidget.ui:114
#, kde-format
msgid "Tab wi&dth:"
msgstr "ਟੈਬ ਚੌੜਾਈ(&d):"
#. i18n: ectx: property (text), widget (QRadioButton, rbIndentWithTabs)
#: dialogs/indentationconfigwidget.ui:153
#, kde-format
msgid "&Tabulators"
msgstr "ਸਾਰਣੀਕਾਰ(&T)"
#. i18n: ectx: property (text), widget (QRadioButton, rbIndentMixed)
#: dialogs/indentationconfigwidget.ui:160
#, fuzzy, kde-format
#| msgid "Tabulators"
msgid "Tabulators &and Spaces"
msgstr "ਸਾਰਣੀਕਾਰ"
#. i18n: ectx: property (text), widget (QCheckBox, chkAutoDetectIndent)
#: dialogs/indentationconfigwidget.ui:167
#, fuzzy, kde-format
#| msgid "A&utomatic end of line detection"
msgid "Automatically detect file indentation"
msgstr "ਆਟੋਮੈਟਿਕ ਲਾਈਨ ਅੰਤ ਦੀ ਖੋਜ(&A)"
#. i18n: ectx: property (title), widget (QGroupBox, gbProperties)
#: dialogs/indentationconfigwidget.ui:177
#, kde-format
msgid "Indentation Properties"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰੀ ਵਿਸ਼ੇਸ਼ਤਾ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkKeepExtraSpaces)
#: dialogs/indentationconfigwidget.ui:183
#, kde-format
msgid ""
"If this option is disabled, changing the indentation level aligns a line to "
"a multiple of the width specified in Indentation width."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkKeepExtraSpaces)
#: dialogs/indentationconfigwidget.ui:186
#, kde-format
msgid "&Keep extra spaces"
msgstr "ਵਾਧੂ ਫਾਸਲਾ ਰੱਖੋ(&K)"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkIndentPaste)
#: dialogs/indentationconfigwidget.ui:193
#, kde-format
msgid ""
"If this option is selected, pasted code from the clipboard is indented. "
"Triggering the undo-action removes the indentation."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkIndentPaste)
#: dialogs/indentationconfigwidget.ui:196
#, kde-format
msgid "Adjust indentation of code &pasted from the clipboard"
msgstr ""
#. i18n: ectx: property (title), widget (QGroupBox, gbKeys)
#: dialogs/indentationconfigwidget.ui:206
#, kde-format
msgid "Indentation Actions"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ ਐਕਸ਼ਨ"
#. i18n: ectx: property (whatsThis), widget (QCheckBox, chkBackspaceUnindents)
#: dialogs/indentationconfigwidget.ui:212
#, kde-format
msgid ""
"If this option is selected, the Backspace key decreases the "
"indentation level if the cursor is located in the leading blank space of a "
"line."
msgstr ""
#. i18n: ectx: property (text), widget (QCheckBox, chkBackspaceUnindents)
#: dialogs/indentationconfigwidget.ui:215
#, kde-format
msgid "&Backspace key in leading blank space unindents"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label)
#: dialogs/indentationconfigwidget.ui:225
#, fuzzy, kde-format
#| msgid ""
#| "\n"
#| "
Check if you have read access to this file."
msgstr ""
"ਫਾਇਲ %1 ਨੂੰ ਲੋਡ ਨਹੀਂ ਕੀਤਾ ਜਾ ਸਕਿਆ, ਕਿਉਕਿ ਇਸ ਨੂੰ ਪੜ੍ਹਨਾ ਸੰਭਵ ਨਹੀਂ ਸੀ।\n"
"\n"
"ਜਾਂਚ ਕਰੋ ਕਿ ਤੁਹਾਨੂੰ ਇਸ ਫਾਇਲ ਨੂੰ ਪੜ੍ਹਨ ਦਾ ਅਧਿਕਾਰ ਹੈ।"
#: document/katedocument.cpp:2264
#, kde-format
msgctxt "translators: you can also translate 'Try Again' with 'Reload'"
msgid "Try Again"
msgstr "ਮੁੜ-ਕੋਸ਼ਿਸ਼"
#: document/katedocument.cpp:2268 document/katedocument.cpp:6532
#, kde-format
msgid "&Close"
msgstr "ਬੰਦ ਕਰੋ(&C)"
#: document/katedocument.cpp:2269 document/katedocument.cpp:6533
#, fuzzy, kde-format
#| msgid "Close message"
msgctxt "Close the message being displayed"
msgid "Close message"
msgstr "ਸੁਨੇਹਾ ਬੰਦ ਕਰੋ"
#: document/katedocument.cpp:2401
#, kde-format
msgid ""
"The file %1 was opened with %2 encoding but contained invalid characters."
"
It is set to read-only mode, as saving might destroy its content.
Either reopen the file with the correct encoding chosen or enable the read-"
"write mode again in the tools menu to be able to edit it."
msgstr ""
#: document/katedocument.cpp:2420
#, kde-format
msgid ""
"The file %1 was opened and contained lines longer than the configured Line "
"Length Limit (%2 characters).
The longest of those lines was %3 "
"characters long
Those lines were wrapped and the document is set to read-"
"only mode, as saving will modify its content."
msgstr ""
#: document/katedocument.cpp:2427
#, kde-format
msgid "Temporarily raise limit and reload file"
msgstr ""
#: document/katedocument.cpp:2430
#, kde-format
msgid "Close"
msgstr "ਬੰਦ ਕਰੋ"
#: document/katedocument.cpp:2457
#, kde-format
msgid ""
"Do you really want to save this unmodified file? You could overwrite changed "
"data in the file on disk."
msgstr ""
"ਕੀ ਤੁਸੀਂ ਇਸ ਨਾ-ਸੋਧੀ ਫਾਇਲ ਨੂੰ ਸੰਭਾਲਣਾ ਚਾਹੁੰਦੇ ਹੋ? ਤੁਸੀਂ ਡਿਸਕ ਉੱਤੇ ਫਾਇਲ ਵਿੱਚ ਡਾਟਾ ਤਬਦੀਲ ਡਾਟਾ "
"ਲਿਖ ਸਕਦੇ ਸੀ।"
#: document/katedocument.cpp:2458
#, kde-format
msgid "Trying to Save Unmodified File"
msgstr "ਨਾ-ਸੋਧੀ ਫਾਇਲ ਸੰਭਾਲਣ ਦੀ ਕੋਸ਼ਿਸ"
#: document/katedocument.cpp:2459 document/katedocument.cpp:2470
#: document/katedocument.cpp:2486
#, kde-format
msgid "Save Nevertheless"
msgstr "ਕਿਵੇਂ ਵੀ ਸੰਭਾਲੋ"
#: document/katedocument.cpp:2468
#, kde-format
msgid ""
"Do you really want to save this file? Both your open file and the file on "
"disk were changed. There could be some data lost."
msgstr ""
"ਕੀ ਤੁਸੀਂ ਇਸ ਫਾਇਲ ਨੂੰ ਸੱਚਮੁੱਚ ਹੀ ਸੰਭਾਲਣਾ ਚਾਹੁੰਦੇ ਹੋ? ਖੁੱਲੀ ਫਾਇਲ ਅਤੇ ਡਿਸਕ ਉੱਤੇ ਪਈ ਫਾਇਲ ਬਦਲੀ ਹੋਈ "
"ਹੈ। ਕੁਝ ਡਾਟਾ ਗੁੰਮ ਹੋ ਸਕਦਾ ਹੈ।"
#: document/katedocument.cpp:2469 document/katedocument.cpp:2485
#: document/katedocument.cpp:2805 syntax/katethemeconfig.cpp:1207
#: syntax/katethemeconfig.cpp:1363
#, kde-format
msgid "Possible Data Loss"
msgstr "ਸੰਭਵ ਤੌਰ 'ਤੇ ਡਾਟਾ ਗੁੰਮ"
#: document/katedocument.cpp:2483
#, fuzzy, kde-format
#| msgid ""
#| "The selected encoding cannot encode every unicode character in this "
#| "document. Do you really want to save it? There could be some data lost."
msgid ""
"The selected encoding cannot encode every Unicode character in this "
"document. Do you really want to save it? There could be some data lost."
msgstr ""
"ਚੁਣੀ ਇੰਕੋਡਿੰਗ ਇਸ ਡੌਕੂਮੈਂਟ ਵਿੱਚ ਹਰ ਯੂਨੀਕੋਡ ਅੱਖਰ ਨੂੰ ਇੰਕੋਡ ਨਹੀਂ ਕਰ ਸਕਦੀ ਹੈ। ਕੀ ਤੁਸੀਂ ਇਸ ਨੂੰ ਸੰਭਾਲਣਾ "
"ਚਾਹੁੰਦੇ ਹੋ? ਕੁਝ ਡਾਟਾ ਖਰਾਬ ਹੋ ਸਕਦਾ ਹੈ।"
#: document/katedocument.cpp:2553
#, fuzzy, kde-format
#| msgid ""
#| "The document could not be saved, as it was not possible to write to %1.\n"
#| "\n"
#| "Check that you have write access to this file or that enough disk space "
#| "is available."
msgid ""
"The document could not be saved, as it was not possible to write to %1.\n"
"Check that you have write access to this file or that enough disk space is "
"available.\n"
"The original file may be lost or damaged. Don't quit the application until "
"the file is successfully written."
msgstr ""
"ਡੌਕੂਮੈਂਟ ਨੂੰ ਸੰਭਾਲਿਆ ਨਹੀਂ ਜਾ ਸਕਿਆ ਹੈ, ਕਿਉਕਿ %1 ਨੂੰ ਲਿਖਣਾ ਸੰਭਵ ਨਹੀਂ ਹੈ।\n"
"\n"
"ਜਾਂਚ ਕਰੋ ਕਿ ਤੁਹਾਨੂੰ ਇਸ ਫਾਇਲ ਨੂੰ ਲਿਖਣ ਅਧਿਕਾਰ ਹਨ ਜਾਂ ਡਿਸਕ ਉੱਤੇ ਲੋੜੀਦੀ ਥਾਂ ਉਪਲੱਬਧ ਹੈ।"
#: document/katedocument.cpp:2674
#, kde-format
msgid ""
"For file %1 no backup copy could be created before saving. If an error "
"occurs while saving, you might lose the data of this file. A reason could be "
"that the media you write to is full or the directory of the file is read-"
"only for you."
msgstr ""
#: document/katedocument.cpp:2678
#, kde-format
msgid "Failed to create backup copy."
msgstr "ਬੈਕਅੱਪ ਕਾਪੀ ਬਣਾਉਣ ਲਈ ਫੇਲ੍ਹ ਹੈ।"
#: document/katedocument.cpp:2679
#, kde-format
msgid "Try to Save Nevertheless"
msgstr "ਕਿੰਝ ਵੀ ਸੰਭਾਲਣ ਦੀ ਕੋਸ਼ਿਸ਼ ਕਰੋ"
#: document/katedocument.cpp:2804
#, kde-format
msgid "Do you really want to continue to close this file? Data loss may occur."
msgstr "ਕੀ ਤੁਸੀਂ ਇਸ ਫਾਇਲ ਨੂੰ ਬੰਦ ਕਰਨ ਲਈ ਸਹਿਮਤ ਹੋ? ਡਾਟਾ ਗੁੰਮ ਹੋ ਸਕਦਾ ਹੈ।"
#: document/katedocument.cpp:2806
#, kde-format
msgid "Close Nevertheless"
msgstr "ਕਿੰਝ ਵੀ ਬੰਦ ਕਰੋ"
#: document/katedocument.cpp:4606
#, kde-format
msgid "Untitled"
msgstr "ਬਿਨ-ਟਾਈਟਲ"
#: document/katedocument.cpp:4729 document/katedocument.cpp:4955
#: document/katedocument.cpp:4965 document/katedocument.cpp:5761
#: document/katedocument.cpp:5948
#, kde-format
msgid "Save File"
msgstr "ਫਾਇਲ ਸੰਭਾਲੋ"
#: document/katedocument.cpp:4732
#, kde-format
msgid "Save failed"
msgstr "ਸੰਭਾਲਣਾ ਫੇਲ੍ਹ"
#: document/katedocument.cpp:4976
#, kde-format
msgid "Save Copy of File"
msgstr "ਫਾਇਲ ਦੀ ਕਾਪੀ ਸੰਭਾਲੋ"
#: document/katedocument.cpp:4988
#, kde-format
msgid ""
"The document could not be saved, as it was not possible to write to %1.\n"
"\n"
"Check that you have write access to this file or that enough disk space is "
"available."
msgstr ""
"ਡੌਕੂਮੈਂਟ ਨੂੰ ਸੰਭਾਲਿਆ ਨਹੀਂ ਜਾ ਸਕਿਆ ਹੈ, ਕਿਉਕਿ %1 ਨੂੰ ਲਿਖਣਾ ਸੰਭਵ ਨਹੀਂ ਹੈ।\n"
"\n"
"ਜਾਂਚ ਕਰੋ ਕਿ ਤੁਹਾਨੂੰ ਇਸ ਫਾਇਲ ਨੂੰ ਲਿਖਣ ਅਧਿਕਾਰ ਹਨ ਜਾਂ ਡਿਸਕ ਉੱਤੇ ਲੋੜੀਦੀ ਥਾਂ ਉਪਲੱਬਧ ਹੈ।"
#: document/katedocument.cpp:5278
#, kde-format
msgid ""
"Using deprecated modeline 'remove-trailing-space'. Please replace with "
"'remove-trailing-spaces modified;', see https://docs.kde.org/?"
"application=katepart&branch=stable5&path=config-variables.html#variable-"
"remove-trailing-spaces"
msgstr ""
#: document/katedocument.cpp:5284
#, kde-format
msgid ""
"Using deprecated modeline 'replace-trailing-space-save'. Please replace with "
"'remove-trailing-spaces all;', see https://docs.kde.org/?"
"application=katepart&branch=stable5&path=config-variables.html#variable-"
"remove-trailing-spaces"
msgstr ""
#: document/katedocument.cpp:5590
#, fuzzy, kde-format
#| msgid "The file '%1' was modified by another program."
msgid "The file '%1' was modified on disk."
msgstr "ਫਾਇਲ '%1' ਨੂੰ ਹੋਰ ਪਰੋਗਰਾਮ ਰਾਹੀਂ ਸੋਧਿਆ ਗਿਆ ਸੀ।"
#: document/katedocument.cpp:5593
#, fuzzy, kde-format
#| msgid "The file '%1' was created by another program."
msgid "The file '%1' was created on disk."
msgstr "ਫਾਇਲ '%1' ਨੂੰ ਹੋਰ ਪਰੋਗਰਾਮ ਰਾਹੀਂ ਬਣਾਇਆ ਗਿਆ ਸੀ।"
#: document/katedocument.cpp:5596
#, fuzzy, kde-format
#| msgid "The file '%1' was deleted by another program."
msgid "The file '%1' was deleted or moved on disk."
msgstr "ਫਾਇਲ '%1' ਨੂੰ ਹੋਰ ਪਰੋਗਰਾਮ ਨੇ ਹਟਾ ਦਿੱਤਾ ਹੈ।"
#: document/katedocument.cpp:5933
#, kde-format
msgid ""
"The document \"%1\" has been modified.\n"
"Do you want to save your changes or discard them?"
msgstr ""
"ਡੌਕੂਮੈਂਟ \"%1\" ਸੋਧਿਆ ਗਿਆ ਹੈ।\n"
"ਕੀ ਤੁਸੀਂ ਆਪਣੀਆਂ ਤਬਦੀਲੀਆਂ ਸੰਭਾਲੀਆਂ ਚਾਹੁੰਦੇ ਹੋ ਜਾਂ ਉਨ੍ਹਾਂ ਨੂੰ ਰੱਦ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ?"
#: document/katedocument.cpp:5936
#, kde-format
msgid "Close Document"
msgstr "ਡੌਕੂਮੈਂਟ ਬੰਦ ਕਰੋ"
#: document/katedocument.cpp:6047
#, kde-format
msgid "The file %2 is still loading."
msgstr "ਫਾਇਲ %2 ਹਾਲੇ ਲੋਡ ਹੋ ਰਹੀ ਹੈ।"
#: document/katedocument.cpp:6052
#, kde-format
msgid "&Abort Loading"
msgstr ""
#: inputmode/katenormalinputmode.cpp:75
#, kde-format
msgid "OVERWRITE"
msgstr "ਉੱਤੇ-ਲਿਖੋ"
#: inputmode/katenormalinputmode.cpp:75
#, kde-format
msgid "INSERT"
msgstr "ਸ਼ਾਮਿਲ ਕਰੋ"
#: inputmode/katenormalinputmodefactory.cpp:29
#, kde-format
msgid "Normal Mode"
msgstr "ਸਧਾਰਨ ਮੋਡ"
#: inputmode/kateviinputmode.cpp:31
#, kde-format
msgid "VI: INSERT MODE"
msgstr "VI: INSERT MODE"
#: inputmode/kateviinputmode.cpp:34
#, kde-format
msgid "VI: NORMAL MODE"
msgstr "VI: NORMAL MODE"
#: inputmode/kateviinputmode.cpp:37
#, kde-format
msgid "VI: VISUAL"
msgstr "VI: VISUAL"
#: inputmode/kateviinputmode.cpp:40
#, kde-format
msgid "VI: VISUAL BLOCK"
msgstr "VI: VISUAL BLOCK"
#: inputmode/kateviinputmode.cpp:43
#, kde-format
msgid "VI: VISUAL LINE"
msgstr "VI: VISUAL LINE"
#: inputmode/kateviinputmode.cpp:46
#, kde-format
msgid "VI: REPLACE"
msgstr ""
#: inputmode/kateviinputmode.cpp:146
#, kde-format
msgid "vi-mode"
msgstr ""
#: inputmode/kateviinputmode.cpp:159
#, kde-format
msgid "recording"
msgstr "ਰਿਕਾਡਿੰਗ"
#: inputmode/kateviinputmodefactory.cpp:38 utils/kateglobal.cpp:90
#: vimode/config/configtab.cpp:233
#, kde-format
msgid "Vi Input Mode"
msgstr "Vi ਇੰਪੁੱਟ ਮੋਡ"
#: mode/katemodeconfigpage.cpp:46
#, kde-format
msgid "
Note: Do "
#| "not use the '|' (vertical bar) character."
msgid ""
"
"
msgstr ""
"
ਸੂਚਨਾ: '|' (ਖਿਤਿਜੀ ਡੰਡਾ) "
"ਨਾ ਵਰਤੋਂ।"
#: printing/printconfigwidgets.cpp:266
#, kde-format
msgid "
Here is an "
"example to show the difference to the normal sort method:
sort(a10, a1, "
"a2) => a1, a10, a2
natsort(a10, a1, a2) => a1, a2, a10"
msgstr ""
#: script/data/commands/utils.js:420
#, kde-format
msgid "Trims trailing whitespace from selection or whole document."
msgstr ""
#: script/data/commands/utils.js:422
#, kde-format
msgid "Trims leading whitespace from selection or whole document."
msgstr ""
#: script/data/commands/utils.js:424
#, kde-format
msgid "Trims leading and trailing whitespace from selection or whole document."
msgstr ""
#: script/data/commands/utils.js:426
#, kde-format
msgid ""
"Joins selected lines or whole document. Optionally pass a separator to put "
"between each line:join ', '
will e.g. join lines and "
"separate them by a comma."
msgstr ""
#: script/data/commands/utils.js:428
#, kde-format
msgid "Removes empty lines from selection or whole document."
msgstr "ਚੋਣ ਜਾਂ ਪੂਰੇ ਡੌਕੂਮੈਂਟ ਵਿੱਚੋਂ ਖਾਲੀ ਲਾਈਨਾਂ ਹਟਾਉ।"
#: script/data/commands/utils.js:430
#, kde-format
msgid ""
"This command aligns lines in the selected block or whole document on the "
"column given by a regular expression given as an argument.
If you "
"give an empty pattern it will align on the first non-blank character by "
"default.
If the pattern has a capture it will indent on the captured "
"match.
Examples:
'alignon -
' will insert "
"spaces before the first '-' of each lines to align them all on the same "
"column.
'alignon :\\s+(.)
' will insert spaces before the "
"first non-blank character that occurs after a colon to align them all on the "
"same column."
msgstr ""
#: script/data/commands/utils.js:434
#, kde-format
msgid ""
"Given a JavaScript function as argument, call that for the list of "
"(selected) lines and replace them with the return value of that callback."
"
Example (join selected lines):each 'function(lines){return "
"lines.join(\", \");}'
To save you some typing, you can also do "
"this to achieve the same:each 'lines.join(\", \")'
"
msgstr ""
#: script/data/commands/utils.js:436
#, kde-format
msgid ""
"Given a JavaScript function as argument, call that for the list of "
"(selected) lines and remove those where the callback returns false."
"
Example (see also rmblank
):filter 'function(l)"
"{return l.length > 0;}'
To save you some typing, you can also do "
"this to achieve the same:filter 'line.length > 0'
"
msgstr ""
#: script/data/commands/utils.js:438
#, kde-format
msgid ""
"Given a JavaScript function as argument, call that for the list of "
"(selected) lines and replace the line with the return value of the callback."
"
Example (see also ltrim
):map 'function(line)"
"{return line.replace(/^\\s+/, \"\");}'
To save you some typing, "
"you can also do this to achieve the same:map 'line.replace(/^\\s"
"+/, \"\")'
"
msgstr ""
#: script/data/commands/utils.js:440
#, kde-format
msgid "Duplicates the selected lines up."
msgstr "ਚੁਣੀਆਂ ਲਾਈਨਾਂ ਉੱਤੇ ਡੁਪਲੀਕੇਟ ਕਰੋ।"
#: script/data/commands/utils.js:442
#, kde-format
msgid "Duplicates the selected lines down."
msgstr "ਚੁਣੀਆਂ ਲਾਈਨਾਂ ਹੇਠਾਂ ਡੁਪਲੀਕੇਟ ਕਰੋ।"
#: script/data/commands/utils.js:446
#, kde-format
msgid ""
"Encode special chars in a single line selection, so the result text can be "
"used as URI."
msgstr ""
#: script/data/commands/utils.js:448
#, kde-format
msgid "Reverse action of URI encode."
msgstr ""
#: script/data/commands/utils.js:450
#, kde-format
msgid ""
"Select text forward from current cursor position to the first occurrence of "
"the given argument after it (or the end of the current line by default)."
msgstr ""
#: script/data/commands/utils.js:452
#, kde-format
msgid ""
"Select text backward from current cursor position to the last occurrence of "
"the given argument before it (or the beginning of the current line by "
"default)."
msgstr ""
#: script/data/indentation/ada.js:2
#, fuzzy, kde-format
#| msgctxt "Language"
#| msgid "Ada"
msgctxt "Autoindent mode"
msgid "ada"
msgstr "Ada"
#: script/data/indentation/cmake.js:2
#, fuzzy, kde-format
#| msgctxt "Language"
#| msgid "CMake"
msgctxt "Autoindent mode"
msgid "CMake"
msgstr "CMake"
#: script/data/indentation/cppstyle.js:2
#, kde-format
msgctxt "Autoindent mode"
msgid "C++/boost Style"
msgstr ""
#: script/data/indentation/cstyle.js:2
#, fuzzy, kde-format
#| msgid "Kate Styles"
msgctxt "Autoindent mode"
msgid "C Style"
msgstr "ਕੇਟ ਸਟਾਈਲ"
#: script/data/indentation/haskell.js:2
#, fuzzy, kde-format
#| msgctxt "Language"
#| msgid "Haskell"
msgctxt "Autoindent mode"
msgid "Haskell"
msgstr "Haskell"
#: script/data/indentation/julia.js:2
#, kde-format
msgctxt "Autoindent mode"
msgid "Julia"
msgstr ""
#: script/data/indentation/latex.js:2
#, fuzzy, kde-format
#| msgid "Latest"
msgctxt "Autoindent mode"
msgid "Latex"
msgstr "ਤਾਜ਼ਾ"
#: script/data/indentation/lilypond.js:2
#, fuzzy, kde-format
#| msgctxt "Language"
#| msgid "LilyPond"
msgctxt "Autoindent mode"
msgid "LilyPond"
msgstr "LilyPond"
#: script/data/indentation/lisp.js:2
#, kde-format
msgctxt "Autoindent mode"
msgid "LISP"
msgstr "LISP"
#: script/data/indentation/pascal.js:2
#, fuzzy, kde-format
#| msgctxt "Language"
#| msgid "Pascal"
msgctxt "Autoindent mode"
msgid "Pascal"
msgstr "Pascal"
#: script/data/indentation/python.js:2
#, kde-format
msgctxt "Autoindent mode"
msgid "Python"
msgstr "ਪਾਈਥਨ"
#: script/data/indentation/r.js:2
#, kde-format
msgctxt "Autoindent mode"
msgid "R"
msgstr ""
#: script/data/indentation/replicode.js:2
#, fuzzy, kde-format
#| msgid "&Replace"
msgctxt "Autoindent mode"
msgid "Replicode"
msgstr "ਬਦਲੋ(&R)"
#: script/data/indentation/ruby.js:2
#, kde-format
msgctxt "Autoindent mode"
msgid "Ruby"
msgstr "ਰੂਬੀ"
#: script/data/indentation/xml.js:2
#, kde-format
msgctxt "Autoindent mode"
msgid "XML Style"
msgstr "XML ਸਟਾਈਲ"
#: script/katecommandlinescript.cpp:37
#, kde-format
msgid "Function '%1' not found in script: %2"
msgstr "%2: ਸਕ੍ਰਿਪਟ ਵਿੱਚ ਫੰਕਸ਼ਨ '%1' ਨਹੀਂ ਲੱਭਿਆ"
#: script/katecommandlinescript.cpp:51
#, kde-format
msgid "Error calling %1"
msgstr "ਕਾਲ %1 ਕਰਨ ਦੌਰਾਨ ਗਲਤੀ"
#: script/katecommandlinescript.cpp:68
#, kde-format
msgid "Bad quoting in call: %1. Please escape single quotes with a backslash."
msgstr ""
#: script/katecommandlinescript.cpp:76 utils/katecmds.cpp:217
#: vimode/cmds.cpp:37
#, kde-format
msgid "Could not access view"
msgstr "ਝਲਕ ਲਈ ਅਧਿਕਾਰ ਨਹੀਂ"
#: script/katecommandlinescript.cpp:118
#, kde-format
msgid "Error calling 'help %1'"
msgstr "'help %1' ਕਾਲ ਕਰਨ ਦੌਰਾਨ ਗਲਤੀ"
#: script/katecommandlinescript.cpp:123
#, kde-format
msgid "No help specified for command '%1' in script %2"
msgstr ""
#: script/katescript.cpp:214
#, kde-format
msgid "Error loading script %1"
msgstr "ਸਕ੍ਰਿਪਟ %1 ਲੋਡ ਕਰਨ ਦੌਰਾਨ ਗਲਤੀ"
#: script/katescriptmanager.cpp:310
#, kde-format
msgid "Reload all JavaScript files (indenters, command line scripts, etc)."
msgstr "ਸਭ ਜਾਵਾਸਕ੍ਰਿਪਟ ਫਾਇਲਾਂ ਮੁੜ-ਲੋਡ ਕਰੋ (ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ, ਕਮਾਂਡ ਲਾਈਨ ਸਕ੍ਰਿਪਟ ਆਦਿ)।"
#: script/katescriptview.cpp:207
#, kde-format
msgid "Command not found: %1"
msgstr "ਕਮਾਂਡ ਨਹੀਂ ਲੱਭੀ: %1"
#: search/katesearchbar.cpp:73
#, kde-format
msgid "Add..."
msgstr "ਸ਼ਾਮਲ..."
#: search/katesearchbar.cpp:298
#, kde-format
msgctxt "short translation"
msgid "1 replacement made"
msgid_plural "%1 replacements made"
msgstr[0] "1 ਤਬਦੀਲੀ ਕੀਤੀ ਗਈ"
msgstr[1] "%1 ਤਬਦੀਲੀਆਂ ਕੀਤੀਆਂ ਗਈਆਂ"
#: search/katesearchbar.cpp:300
#, kde-format
msgctxt "short translation"
msgid "1 match found"
msgid_plural "%1 matches found"
msgstr[0] "1 ਮਿਲਦਾ ਲੱਭਿਆ"
msgstr[1] "%1 ਮਿਲਦੇ ਲੱਭੇ"
#: search/katesearchbar.cpp:374
#, kde-format
msgid "Reached top, continued from bottom"
msgstr "ਉੱਤੇ ਤੱਕ ਆ ਗਿਆ, ਹੇਠਾਂ ਤੋਂ ਫੇਰ ਚਾਲੂ"
#: search/katesearchbar.cpp:376
#, kde-format
msgid "Reached bottom, continued from top"
msgstr "ਹੇਠ ਤੱਕ ਆ ਗਿਆ, ਉੱਤੇ ਤੋਂ ਫੇਰ ਚਾਲੂ"
#: search/katesearchbar.cpp:381
#, kde-format
msgid "Not found"
msgstr "ਨਹੀਂ ਲੱਭਿਆ"
#: search/katesearchbar.cpp:615
#, kde-format
msgid "Bottom of file reached. Continue from top?"
msgstr "ਫਾਇਲ ਦੇ ਹੇਠਾਂ ਤੱਕ ਆ ਗਏ, ਕੀ ਉੱਤੇ ਤੋਂ ਜਾਰੀ ਰੱਖਣਾ ਹੈ?"
#: search/katesearchbar.cpp:615
#, kde-format
msgid "Top of file reached. Continue from bottom?"
msgstr "ਫਾਇਲ ਦੇ ਉੱਤੇ ਤੱਕ ਆ ਗਏ, ਕੀ ਹੇਠਾਂ ਤੋਂ ਜਾਰੀ ਰੱਖਣਾ ਹੈ?"
#: search/katesearchbar.cpp:618
#, kde-format
msgid "Continue search?"
msgstr "ਖੋਜ ਜਾਰੀ ਰੱਖਣੀ ਹੈ?"
#: search/katesearchbar.cpp:920
#, fuzzy, kde-format
#| msgid "Search Highlight"
msgid "SearchHighLight"
msgstr "ਖੋਜ ਹਾਈਲਾਈਟ"
#: search/katesearchbar.cpp:1158
#, kde-format
msgid "Beginning of line"
msgstr "ਲਾਈਨ ਦੇ ਸ਼ੁਰੂ ਵਿੱਚ"
#: search/katesearchbar.cpp:1159
#, kde-format
msgid "End of line"
msgstr "ਲਾਈਨ ਦਾ ਅੰਤ"
#: search/katesearchbar.cpp:1161
#, fuzzy, kde-format
#| msgid "Any single character (excluding line breaks)"
msgid "Match any character excluding new line (by default)"
msgstr "ਕੋਈ ਵੀ ਇੱਕਲਾ ਅੱਖਰ (ਲਾਈਨ ਬਰੇਕ ਛੱਡ ਕੇ)"
#: search/katesearchbar.cpp:1162
#, kde-format
msgid "One or more occurrences"
msgstr "ਇੱਕ ਜਾਂ ਵੱਧ ਮੌਜੂਦਗੀ"
#: search/katesearchbar.cpp:1163
#, kde-format
msgid "Zero or more occurrences"
msgstr "ਸਿਫ਼ਰ ਜਾਂ ਵੱਧ ਮੌਜੂਦਗੀ"
#: search/katesearchbar.cpp:1164
#, kde-format
msgid "Zero or one occurrences"
msgstr "ਸਿਫ਼ਰ ਜਾਂ ਇੱਕ ਮੌਜੂਦਗੀ"
#: search/katesearchbar.cpp:1167
#, kde-format
msgid " through occurrences"
msgstr ""
#: search/katesearchbar.cpp:1173
#, kde-format
msgid "Group, capturing"
msgstr "ਗਰੁੱਪ, ਕੈਪਚਰ"
#: search/katesearchbar.cpp:1174
#, kde-format
msgid "Or"
msgstr "ਜਾਂ"
#: search/katesearchbar.cpp:1175
#, kde-format
msgid "Set of characters"
msgstr "ਅੱਖਰਾਂ ਦਾ ਸੈੱਟ"
#: search/katesearchbar.cpp:1176
#, kde-format
msgid "Negative set of characters"
msgstr "ਅੱਖਰਾਂ ਦਾ ਨੈਗਟਿਵ ਸੈੱਟ"
#: search/katesearchbar.cpp:1180
#, kde-format
msgid "Whole match reference"
msgstr "ਪੂਰਾ ਮੇਲ ਰੈਫਰੈਂਸ"
#: search/katesearchbar.cpp:1191
#, kde-format
msgid "Reference"
msgstr "ਰੈਡਰੈਂਸ"
#: search/katesearchbar.cpp:1198
#, kde-format
msgid "Line break"
msgstr "ਲਾਈਨ ਬਰੇਕ"
#: search/katesearchbar.cpp:1199
#, kde-format
msgid "Tab"
msgstr "ਟੈਬ"
#: search/katesearchbar.cpp:1202
#, kde-format
msgid "Word boundary"
msgstr "ਸ਼ਬਦ ਸੀਮਾ"
#: search/katesearchbar.cpp:1203
#, kde-format
msgid "Not word boundary"
msgstr "ਕੋਈ ਸ਼ਬਦ ਸੀਮਾ ਨਹੀਂ"
#: search/katesearchbar.cpp:1204
#, kde-format
msgid "Digit"
msgstr "ਅੰਕ"
#: search/katesearchbar.cpp:1205
#, kde-format
msgid "Non-digit"
msgstr "ਗ਼ੈਰ-ਅੰਕ"
#: search/katesearchbar.cpp:1206
#, kde-format
msgid "Whitespace (excluding line breaks)"
msgstr ""
#: search/katesearchbar.cpp:1207
#, fuzzy, kde-format
#| msgid "&Spaces"
msgid "Non-whitespace"
msgstr "ਖਾਲੀ ਥਾਂ(&S)"
#: search/katesearchbar.cpp:1208
#, kde-format
msgid "Word character (alphanumerics plus '_')"
msgstr ""
#: search/katesearchbar.cpp:1209
#, kde-format
msgid "Non-word character"
msgstr "ਗ਼ੈਰ-ਸ਼ਬਦ ਅੱਖਰ"
#: search/katesearchbar.cpp:1212
#, kde-format
msgid "Octal character 000 to 377 (2^8-1)"
msgstr ""
#: search/katesearchbar.cpp:1213
#, kde-format
msgid "Hex character 0000 to FFFF (2^16-1)"
msgstr ""
#: search/katesearchbar.cpp:1214
#, kde-format
msgid "Backslash"
msgstr "ਬੈਕਸਲੈਸ਼"
#: search/katesearchbar.cpp:1218
#, kde-format
msgid "Group, non-capturing"
msgstr "ਗਰੁੱਪ, ਗ਼ੈਰ-ਕੈਪਚਰ"
#: search/katesearchbar.cpp:1219
#, kde-format
msgid "Positive Lookahead"
msgstr ""
#: search/katesearchbar.cpp:1220
#, kde-format
msgid "Negative lookahead"
msgstr ""
#: search/katesearchbar.cpp:1224
#, kde-format
msgid "Fixed-length positive lookbehind"
msgstr ""
#: search/katesearchbar.cpp:1225
#, kde-format
msgid "Fixed-length negative lookbehind"
msgstr ""
#: search/katesearchbar.cpp:1230
#, kde-format
msgid "Begin lowercase conversion"
msgstr ""
#: search/katesearchbar.cpp:1231
#, kde-format
msgid "Begin uppercase conversion"
msgstr ""
#: search/katesearchbar.cpp:1232
#, kde-format
msgid "End case conversion"
msgstr ""
#: search/katesearchbar.cpp:1233
#, kde-format
msgid "Lowercase first character conversion"
msgstr ""
#: search/katesearchbar.cpp:1234
#, kde-format
msgid "Uppercase first character conversion"
msgstr ""
#: search/katesearchbar.cpp:1235
#, kde-format
msgid "Replacement counter (for Replace All)"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label)
#: search/searchbarincremental.ui:50
#, kde-format
msgid "F&ind:"
msgstr "ਖੋਜ(&i):"
#. i18n: ectx: property (toolTip), widget (QComboBox, pattern)
#: search/searchbarincremental.ui:78 search/searchbarpower.ui:295
#, kde-format
msgid "Text to search for"
msgstr "ਖੋਜ ਲਈ ਟੈਕਸਟ"
#. i18n: ectx: property (toolTip), widget (QToolButton, findNext)
#. i18n: ectx: property (toolTip), widget (QToolButton, next)
#: search/searchbarincremental.ui:91 search/searchbarpower.ui:175
#, kde-format
msgid "Jump to next match"
msgstr "ਅਗਲੇ ਮੇਲ ਉੱਤੇ ਜਾਓ"
#. i18n: ectx: property (toolTip), widget (QToolButton, findPrev)
#. i18n: ectx: property (toolTip), widget (QToolButton, prev)
#: search/searchbarincremental.ui:101 search/searchbarpower.ui:185
#, kde-format
msgid "Jump to previous match"
msgstr "ਪਿੱਛੇ ਮੇਲ ਉੱਤੇ ਜਾਓ"
#. i18n: ectx: property (toolTip), widget (QToolButton, matchCase)
#: search/searchbarincremental.ui:111 search/searchbarpower.ui:136
#, fuzzy, kde-format
#| msgid "Case sensitive"
msgid "Match case sensitive"
msgstr "ਅੱਖਰ ਸੰਵੇਦਨਸ਼ੀਲ"
#. i18n: ectx: property (toolTip), widget (QToolButton, mutate)
#: search/searchbarincremental.ui:146
#, kde-format
msgid "Switch to power search and replace bar"
msgstr "ਪਾਵਰ ਖੋਜ ਅਤੇ ਬਦਲਣ ਬਾਰ ਲਈ ਸਵਿੱਚ ਕਰੋ"
#. i18n: ectx: property (text), widget (QLabel, label)
#: search/searchbarpower.ui:50
#, kde-format
msgid "Fin&d:"
msgstr ""
#. i18n: ectx: property (text), widget (QLabel, label_3)
#: search/searchbarpower.ui:63
#, kde-format
msgid "Rep&lace:"
msgstr "ਬਦਲੋ(&l):"
#. i18n: ectx: property (text), widget (QLabel, label_2)
#: search/searchbarpower.ui:76
#, fuzzy, kde-format
#| msgid "&Mode"
msgid "&Mode:"
msgstr "ਮੋਡ(&M)"
#. i18n: ectx: property (toolTip), widget (QComboBox, searchMode)
#: search/searchbarpower.ui:103
#, kde-format
msgid "Search mode"
msgstr "ਖੋਜ ਮੋਡ"
#. i18n: ectx: property (text), item, widget (QComboBox, searchMode)
#: search/searchbarpower.ui:113
#, kde-format
msgid "Plain text"
msgstr "ਪਲੇਨ ਟੈਕਸਟ"
#. i18n: ectx: property (text), item, widget (QComboBox, searchMode)
#: search/searchbarpower.ui:118
#, kde-format
msgid "Whole words"
msgstr "ਪੂਰਾ ਸ਼ਬਦ"
#. i18n: ectx: property (text), item, widget (QComboBox, searchMode)
#: search/searchbarpower.ui:123
#, kde-format
msgid "Escape sequences"
msgstr ""
#. i18n: ectx: property (text), item, widget (QComboBox, searchMode)
#: search/searchbarpower.ui:128
#, kde-format
msgid "Regular expression"
msgstr "ਰੈਗੂਲਰ ਸਮੀਕਰਨ"
#. i18n: ectx: property (toolTip), widget (QToolButton, selectionOnly)
#: search/searchbarpower.ui:149
#, fuzzy, kde-format
#| msgid "Selection &only"
msgid "Search in the selection only"
msgstr "ਚੋਣ ਲਈ ਹੀ(&o)"
#. i18n: ectx: property (toolTip), widget (QPushButton, replaceNext)
#: search/searchbarpower.ui:195
#, kde-format
msgid "Replace next match"
msgstr "ਅਗਲਾ ਮੇਲ ਬਦਲੋ"
#. i18n: ectx: property (text), widget (QPushButton, replaceNext)
#. i18n: ectx: property (text), widget (QPushButton, m_replaceBtn)
#: search/searchbarpower.ui:198 spellcheck/spellcheckbar.ui:130
#, kde-format
msgid "&Replace"
msgstr "ਬਦਲੋ(&R)"
#. i18n: ectx: property (toolTip), widget (QPushButton, replaceAll)
#: search/searchbarpower.ui:224
#, kde-format
msgid "Replace all matches"
msgstr "ਸਭ ਮੇਲ ਬਦਲੋ"
#. i18n: ectx: property (text), widget (QPushButton, replaceAll)
#: search/searchbarpower.ui:227
#, kde-format
msgid "Replace &All"
msgstr "ਸਭ ਬਦਲੋ(&A)"
#. i18n: ectx: property (text), widget (QPushButton, findAll)
#: search/searchbarpower.ui:234
#, kde-format
msgid "&Find All"
msgstr "ਸਭ ਲੱਭੋ(&F)"
#. i18n: ectx: property (text), widget (QPushButton, cancel)
#: search/searchbarpower.ui:257
#, kde-format
msgid "Cancel"
msgstr ""
#. i18n: ectx: property (toolTip), widget (QToolButton, mutate)
#: search/searchbarpower.ui:268
#, kde-format
msgid "Switch to incremental search bar"
msgstr ""
#. i18n: ectx: property (toolTip), widget (QComboBox, replacement)
#: search/searchbarpower.ui:314
#, kde-format
msgid "Text to replace with"
msgstr "ਬਦਲਣ ਲਈ ਟੈਕਸਟ"
#: spellcheck/spellcheckbar.cpp:148
#, fuzzy, kde-format
#| msgid "Spellcheck Selection..."
msgid "Spell check canceled."
msgstr "ਚੋਣ ਸਪੈਲਿੰਗ ਚੈੱਕ..."
#: spellcheck/spellcheckbar.cpp:245
#, fuzzy, kde-format
#| msgid "Spellcheck Selection..."
msgctxt "@info:progress"
msgid "Spell checking in progress…"
msgstr "ਚੋਣ ਸਪੈਲਿੰਗ ਚੈੱਕ..."
#: spellcheck/spellcheckbar.cpp:246 spellcheck/spellcheckbar.cpp:435
#, fuzzy, kde-format
#| msgid "Spelling"
msgctxt "@title:window"
msgid "Check Spelling"
msgstr "ਸਪੈਲਿੰਗ"
#: spellcheck/spellcheckbar.cpp:432 spellcheck/spellcheckbar.cpp:435
#, fuzzy, kde-format
#| msgid "Spellcheck Selection..."
msgid "Spell check complete."
msgstr "ਚੋਣ ਸਪੈਲਿੰਗ ਚੈੱਕ..."
#. i18n: ectx: property (whatsThis), widget (QLabel, textLabel2)
#. i18n: ectx: property (whatsThis), widget (QLabel, m_unknownWord)
#: spellcheck/spellcheckbar.ui:30 spellcheck/spellcheckbar.ui:46
#, kde-format
msgid ""
"
\n"
"Click here if you consider the unknown word not to be misspelled, and you "
"want to avoid wrongly detecting it again in the future. If you want to let "
"it remain as is, but not add it to the dictionary, then click Ignore "
"or Ignore All instead.
\n"
"ਜੇਕਰ ਤੁਸੀ ਚਾਹੁੰਦੇ ਹੋ ਕਿ ਇਹ ਅਣਜਾਣ ਅੱਖਰ ਗਲਤ ਸ਼ਬਦ-ਜੋੜ ਨਹੀ ਹੈ ਤੇ ਤੁਸੀ ਚਾਹੁੰਦੇ ਹੋ ਅਗਲੀ ਵਾਰ ਇਸ ਨੂੰ "
"ਗਲਤੀ ਨਾਲ ਨਾ ਖੋਜਿਆ ਜਾਵੇ, ਤਾਂ ਇਥੇ ਕਲਿੱਕ ਕਰੋ। ਜੇਕਰ ਤੁਸੀ ਚਾਹੁੰਦੇ ਹੋ ਕਿ ਇਹ ਇਸੇਤਰਾਂ ਹੀ ਰਹੇ, ਪਰ "
"ਸ਼ਬਦ-ਕੋਸ਼ ਵਿੱਚ ਨਾ ਸ਼ਾਮਲ ਨਾ ਹੋਵੇ ਤਾਂ ਅਣਡਿੱਠਾ ਜਾਂ ਸਭ ਅਣਡਿੱਠੇ ਵਰਤੋਂ।
"
msgstr ""
#: syntax/katethemeconfig.cpp:264
#, kde-format
msgid "Code Folding"
msgstr "ਕੋਡ ਸਮੇਟਣਾ"
#: syntax/katethemeconfig.cpp:266
#, fuzzy, kde-format
#| msgid "
possible false values: 0 off false"
"p>"
msgstr ""
#: utils/katecmds.cpp:91
#, kde-format
msgid "Deletes the current line."
msgstr "ਮੌਜੂਦਾ ਲਾਈਨ ਹਟਾਉਂਦਾ ਹੈ।"
#: utils/katecmds.cpp:95
#, kde-format
msgid ""
"
possible false "
"values: 0 off false
possible false values: 0 off false
set-indent-width width
Sets the indentation width to the " "number width. Used only if you are indenting with spaces.
" msgstr "" #: utils/katecmds.cpp:130 #, kde-format msgid "" "set-indent-mode mode
The mode parameter is a value as seen " "in the Tools - Indentation menu
" msgstr "" #: utils/katecmds.cpp:135 #, kde-format msgid "" "set-auto-indent enable
Enable or disable autoindentation." "p>
possible true values: 1 on true
possible false values: 0 off false"
"p>"
msgstr ""
#: utils/katecmds.cpp:142
#, kde-format
msgid ""
"
set-line-numbers enable
Sets the visibility of the line " "numbers pane.
possible true values: 1 on true
possible false "
"values: 0 off false
set-folding-markers enable
Sets the visibility of the " "folding markers pane.
possible true values: 1 on true
possible "
"false values: 0 off false
set-icon-border enable
Sets the visibility of the icon " "border.
possible true values: 1 on true
possible false values: 0 "
"off false
set-word-wrap enable
Enables dynamic word wrap according to " "enable
possible true values: 1 on true
possible false "
"values: 0 off false
set-word-wrap-column width
Sets the line width for hard " "wrapping to width. This is used if you are having your text wrapped " "automatically.
" msgstr "" #: utils/katecmds.cpp:175 #, kde-format msgid "" "set-replace-tabs-save enable
When enabled, tabs will be " "replaced with whitespace whenever the document is saved.
possible "
"true values: 1 on true
possible false values: 0 off false
set-highlight highlight
Sets the syntax highlighting system " "for the document. The argument must be a valid highlight name, as seen in " "the Tools → Highlighting menu. This command provides an autocompletion list " "for its argument.
" msgstr "" #: utils/katecmds.cpp:188 #, kde-format msgid "set-mode mode
Sets the mode as seen in Tools - Mode
" msgstr "" #: utils/katecmds.cpp:193 #, kde-format msgid "" "set-show-indent enable
If enabled, indentation will be " "visualized by a vertical dotted line.
possible true values: 1 on "
"true
possible false values: 0 off false
Open the Print dialog to print the current document.
" msgstr "ਮੌਜੂਦਾ ਡੌਕੂਮੈਂਟ ਨੂੰ ਛਾਪਣ ਲਈ ਇਹ ਕਮਾਂਡ ਵਰਤੋਂ" #: utils/katecmds.cpp:314 utils/katecmds.cpp:341 #, kde-format msgid "Missing argument. Usage: %1char identifier
This command allows you to insert literal " "characters by their numerical identifier, in decimal, octal or hexadecimal " "form.
Examples:
date or date format
Inserts a date/time string as defined by " "the specified format, or the format yyyy-MM-dd hh:mm:ss if none is specified." "
Possible format specifiers are:
d | The day as " "number without a leading zero (1-31). |
dd | The day as " "number with a leading zero (01-31). |
ddd | The " "abbreviated localized day name (e.g. 'Mon'..'Sun'). |
dddd" "td> | The long localized day name (e.g. 'Monday'..'Sunday'). | " "tr>
M | The month as number without a leading zero (1-12)." "td> |
MM | The month as number with a leading zero (01-12)." "td> |
MMM | The abbreviated localized month name (e.g. " "'Jan'..'Dec'). |
yy | The year as two digit number " "(00-99). |
yyyy | The year as four digit number " "(1752-8000). |
h | The hour without a leading zero " "(0..23 or 1..12 if AM/PM display). |
hh | The hour with " "a leading zero (00..23 or 01..12 if AM/PM display). |
m" "td> | The minute without a leading zero (0..59). |
mm" "td> | The minute with a leading zero (00..59). |
s" "td> | The second without a leading zero (0..59). |
ss" "td> | The second with a leading zero (00..59). |
z" "td> | The milliseconds without leading zeroes (0..999). | " "tr>
zzz | The milliseconds with leading zeroes (000..999)." "td> |
AP | Use AM/PM display. AP will be replaced by either " "\"AM\" or \"PM\". |
ap | Use am/pm display. ap will be " "replaced by either \"am\" or \"pm\". |
sort
Sort the selected text or whole document if there is no " "selection
" msgstr "ਚੁਣਿਆ ਟੈਕਸਟ ਜਾਂ ਪੂਰਾ ਡੌਕੂਮੈਂਟ ਲੜੀਬੱਧ ਕਰੋ।" #: utils/katecmds.cpp:697 #, fuzzy, kde-format #| msgid "Remove duplicate lines from the selected text or whole document." msgid "" "uniq
Remove duplicate lines from the selected text or whole " "document if there is no selection.
" msgstr "ਚੁਣੇ ਟੈਕਸਟ ਜਾਂ ਪੂਰੇ ਡੌਕੂਮੈਂਟ ਵਿੱਚੋਂ ਡੁਪਲੀਕੇਟ ਲਾਈਨਾਂ ਹਟਾਓ।" #: utils/katecmds.cpp:701 #, kde-format msgid "" "sortuniq
Sort the selected text or whole document and then remove " "all duplicate lines.
" msgstr "" #: utils/katecmds.cpp:705 #, kde-format msgid "" "natsort
Sort the selected text or whole document in natural order."
" Sets the background color of the editing area. ਸੰਪਾਦਨ ਖੇਤਰ ਦੀ ਬੈਕਗਰਾਊਂਡ ਦਾ ਰੰਗ ਦਿਓ। For help on individual commands, do ਵੱਖਰੀ ਕਮਾਂਡ ਬਾਰੇ ਮਦਦ ਲਈ, This is the Katepart command line. w/wa — write document(s) to disk Usage: w[a]"
"b> Writes the current document(s) to disk. It can be called in "
"two ways: If no file name is "
"associated with the document, a file dialog will be shown. q/qa/wq/wqa — [write and] quit Usage: [w]q[a]"
"b> Quits the application. If w is prepended, it also "
"writes the document(s) to disk. This command can be called in several ways:"
" In all "
"cases, if the view being closed is the last view, the application quits. If "
"no file name is associated with the document and it should be written to "
"disk, a file dialog will be shown. x/xa — write and quit Usage: x[a]"
"p> Saves document(s) and quits (exits). This command can be called "
"in two ways: In "
"all cases, if the view being closed is the last view, the application quits. "
"If no file name is associated with the document and it should be written to "
"disk, a file dialog will be shown. Unlike the 'w' commands, this "
"command only writes the document if it is modified. sp,split— Split horizontally the current view into two"
"p> Usage: sp[lit] The result is two views on the "
"same document. vs,vsplit— Split vertically the current view into two"
"p> Usage: vs[plit] The result is two views on the "
"same document. clo[se]— Close the current view Usage: clo[se]"
"b> After executing it, the current view will be closed. [v]new — split view and create new document Usage: "
"[v]new Splits the current view and opens a new "
"document in the new view. This command can be called in two ways: e[dit] — reload current document Usage: e[dit]"
"b> Starts editing the current document again. This is "
"useful to re-edit the current file, when it was modified on disk. b,buffer — Edit document N from the document list"
"p> Usage: b[uffer] [N] bp,bprev — previous buffer Usage: bp[revious] "
"[N] Goes to [N]th previous document (\"buffer"
"\") in document list. [N] defaults to one. Wraps "
"around the start of the document list. bn,bnext — switch to next document Usage: "
"bn[ext] [N] Goes to [N]th next document "
"(\"buffer\") in document list.[N] defaults to one. "
"p> Wraps around the end of the document list. bf,bfirst — first document Usage: bf[irst]"
"tt> Goes to the first document (\"buffer\") in document "
"list. bl,blast — last document Usage: bl[ast]"
"tt> Goes to the last document (\"buffer\") in document "
"list. ls list current buffers "
msgstr ""
#: vimode/cmds.cpp:52
#, kde-format
msgid "Missing argument. Usage: %1 This icon will be displayed in the menu and toolbar. ਇਹ ਆਈਕਾਨ ਮੇਨੂ ਅਤੇ ਟੂਲਬਾਰ ਵਿੱਚ ਦਿੱਸੇਗਾ। Select the marker type you want to change. ਮਾਰਕਰ ਕਿਸਮ ਚੁਣੋ, ਜਿਸ ਨੂੰ ਤੁਸੀਂ ਬਦਲਣਾ ਚਾਹੁੰਦੇ ਹੋ। Data Recovery (Help)"
#~ "p> The file was not closed appropriately. Do you want to recover the "
#~ "data? ਡਾਟਾ ਰਿਕਵਰੀ (ਮੱਦਦ)"
#~ "p> ਫਾਈਲ ਠੀਕ ਤਰ੍ਹਾਂ ਬੰਦ ਨਹੀਂ ਸੀ ਕੀਤੀ ਗਈ। ਕੀ ਤੁਸੀਂ ਡਾਟਾ ਰਿਕਵਰ ਕਰਨਾ ਚਾਹੁੰਦੇ ਹੋ?
Here is an example to show the difference to the normal sort method:"
"
sort(a10, a1, a2) => a1, a10, a2
natsort(a10, a1, a2) => a1, a2, a10"
"p>"
msgstr ""
#: utils/kateglobal.cpp:59
#, kde-format
msgid "Kate Part"
msgstr "ਕੇਟ ਭਾਗ"
#: utils/kateglobal.cpp:61
#, kde-format
msgid "Embeddable editor component"
msgstr "ਇੰਬੈੱਡ ਹੋਣ ਯੋਗ ਐਡੀਟਰ ਭਾਗ"
#: utils/kateglobal.cpp:63
#, fuzzy, kde-format
#| msgid "(c) 2000-2005 The Kate Authors"
msgid "(c) 2000-2022 The Kate Authors"
msgstr "(c) ੨੦੦੦-੨੦੦੫ ਕੇਟ ਲੇਖਕ"
#: utils/kateglobal.cpp:83
#, kde-format
msgid "Christoph Cullmann"
msgstr "ਕਰਿਸਟੋਫ ਕੱਲਮੈਨ"
#: utils/kateglobal.cpp:83
#, kde-format
msgid "Maintainer"
msgstr "ਪਰਬੰਧਕ"
#: utils/kateglobal.cpp:84
#, kde-format
msgid "Dominik Haumann"
msgstr "ਡੋਮਿਕਿਕ ਹੂਮੱਨ"
#: utils/kateglobal.cpp:84 utils/kateglobal.cpp:85 utils/kateglobal.cpp:87
#: utils/kateglobal.cpp:95 utils/kateglobal.cpp:98 utils/kateglobal.cpp:103
#, kde-format
msgid "Core Developer"
msgstr "ਕੋਰ ਡਿਵੈਲਪਰ"
#: utils/kateglobal.cpp:85
#, kde-format
msgid "Milian Wolff"
msgstr ""
#: utils/kateglobal.cpp:86
#, kde-format
msgid "Joseph Wenninger"
msgstr "ਜੌਸਫ਼ ਵਿੱਨੀਨਗੀਰ"
#: utils/kateglobal.cpp:90
#, kde-format
msgid "Erlend Hamberg"
msgstr ""
#: utils/kateglobal.cpp:91
#, kde-format
msgid "Bernhard Beschow"
msgstr ""
#: utils/kateglobal.cpp:92 utils/kateglobal.cpp:110
#, kde-format
msgid "Developer"
msgstr "ਡਿਵੈਲਪਰ"
#: utils/kateglobal.cpp:95
#, kde-format
msgid "Anders Lund"
msgstr "ਐਂਡਰਸ ਲੁਡ"
#: utils/kateglobal.cpp:96
#, kde-format
msgid "Michel Ludwig"
msgstr ""
#: utils/kateglobal.cpp:96
#, kde-format
msgid "On-the-fly spell checking"
msgstr ""
#: utils/kateglobal.cpp:97
#, kde-format
msgid "Pascal Létourneau"
msgstr ""
#: utils/kateglobal.cpp:97
#, kde-format
msgid "Large scale bug fixing"
msgstr ""
#: utils/kateglobal.cpp:98
#, kde-format
msgid "Hamish Rodda"
msgstr "ਹਮੇਸ਼ ਰੋੱਡਾ"
#: utils/kateglobal.cpp:99
#, kde-format
msgid "Waldo Bastian"
msgstr "ਵਾਲਡੂ ਬਾਸਟਿਨ"
#: utils/kateglobal.cpp:99
#, kde-format
msgid "The cool buffersystem"
msgstr "ਵਧੀਆ ਬਫ਼ਰ ਸਿਸਟਮ"
#: utils/kateglobal.cpp:100
#, kde-format
msgid "Charles Samuels"
msgstr "ਚਾਰਲਿਸ ਸਾਮਉਲਸ"
#: utils/kateglobal.cpp:100
#, kde-format
msgid "The Editing Commands"
msgstr "ਐਡੀਟਰ ਕਮਾਡਾਂ"
#: utils/kateglobal.cpp:101
#, kde-format
msgid "Matt Newell"
msgstr "ਮੱਟ ਨੋਵੱਲ"
#: utils/kateglobal.cpp:101
#, kde-format
msgid "Testing, ..."
msgstr "ਟੈਸਟਿੰਗ, ..."
#: utils/kateglobal.cpp:102
#, kde-format
msgid "Michael Bartl"
msgstr "ਮਾਈਕਲ ਬਾਰਟਲ"
#: utils/kateglobal.cpp:102
#, kde-format
msgid "Former Core Developer"
msgstr "ਪੁਰਾਣਾ ਕੋਰ ਡਿਵੈਲਪਰ"
#: utils/kateglobal.cpp:103
#, kde-format
msgid "Michael McCallum"
msgstr "ਮਾਈਕਲ ਮੈੱਕੱਲੂਮ"
#: utils/kateglobal.cpp:104
#, kde-format
msgid "Michael Koch"
msgstr "ਮਾਈਕਲ ਕੋਚ"
#: utils/kateglobal.cpp:104
#, kde-format
msgid "KWrite port to KParts"
msgstr "KWrite ਪੋਰਟ ਤੋਂ KParts ਤੱਕ"
#: utils/kateglobal.cpp:105
#, kde-format
msgid "Christian Gebauer"
msgstr "ਕ੍ਰਿਸਟਿਨ ਗੀਬਾਉਰ"
#: utils/kateglobal.cpp:106
#, kde-format
msgid "Simon Hausmann"
msgstr "ਸਿਮੋਨ ਹਾਉਸਮਨ"
#: utils/kateglobal.cpp:107
#, kde-format
msgid "Glen Parker"
msgstr "ਗੀਨ ਪਾਰਕਰ"
#: utils/kateglobal.cpp:107
#, kde-format
msgid "KWrite Undo History, Kspell integration"
msgstr "KWrite ਵਾਪਿਸ ਅਤੀਤ, Kspell ਐਟੀਗਰੇਸ਼ਨ"
#: utils/kateglobal.cpp:108
#, kde-format
msgid "Scott Manson"
msgstr "ਸਕੱਟ ਮਾਨਸਨ"
#: utils/kateglobal.cpp:108
#, kde-format
msgid "KWrite XML Syntax highlighting support"
msgstr "KWrite XML Syntax ਹਾਈਲਾਈਟਿੰਗ ਸਹਿਯੋਗ"
#: utils/kateglobal.cpp:109
#, kde-format
msgid "John Firebaugh"
msgstr "ਜੋਨ ਫਾਇਰਬਾਉਘ"
#: utils/kateglobal.cpp:109
#, kde-format
msgid "Patches and more"
msgstr "ਪੈਂਚ ਤੇ ਹੋਰ"
#: utils/kateglobal.cpp:110
#, kde-format
msgid "Andreas Kling"
msgstr "ਐਂਡਰਿਸ ਕਲਿੰਗ"
#: utils/kateglobal.cpp:111
#, kde-format
msgid "Mirko Stocker"
msgstr ""
#: utils/kateglobal.cpp:111
#, kde-format
msgid "Various bugfixes"
msgstr "ਕਈ ਬੱਗ ਫਿਕਸ"
#: utils/kateglobal.cpp:112
#, kde-format
msgid "Matthew Woehlke"
msgstr ""
#: utils/kateglobal.cpp:112
#, kde-format
msgid "Selection, KColorScheme integration"
msgstr ""
#: utils/kateglobal.cpp:113
#, kde-format
msgid "Sebastian Pipping"
msgstr ""
#: utils/kateglobal.cpp:114
#, kde-format
msgid "Search bar back- and front-end"
msgstr ""
#: utils/kateglobal.cpp:117
#, kde-format
msgid "Jochen Wilhelmy"
msgstr "ਜਾਚੀਨ ਵਿਲਹਿਮਲੇ"
#: utils/kateglobal.cpp:117
#, kde-format
msgid "Original KWrite Author"
msgstr "ਮੁੱਢਲਾ KWrite ਲੇਖਕ"
#: utils/kateglobal.cpp:118
#, kde-format
msgid "Gerald Senarclens de Grancy"
msgstr ""
#: utils/kateglobal.cpp:119
#, kde-format
msgid "QA and Scripting"
msgstr "QA ਤੇ ਸਕ੍ਰਿਪਟਿੰਗ"
#: utils/kateglobal.cpp:123
#, kde-format
msgid "Matteo Merli"
msgstr "ਮੱਟੀਉ ਮਿਰਲੀ"
#: utils/kateglobal.cpp:123
#, kde-format
msgid "Highlighting for RPM Spec-Files, Perl, Diff and more"
msgstr "RPM Spec-Files, Perl, Diff ਅਤੇ ਹੋਰ ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:124
#, kde-format
msgid "Rocky Scaletta"
msgstr "ਰਾਕਯੇ ਸਕਾਲਿੱਟਾ"
#: utils/kateglobal.cpp:124
#, kde-format
msgid "Highlighting for VHDL"
msgstr "VHDL ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:125
#, kde-format
msgid "Yury Lebedev"
msgstr "ਯੂਰੇ ਲਿਬਿਡਿਵ"
#: utils/kateglobal.cpp:125
#, kde-format
msgid "Highlighting for SQL"
msgstr "SQL ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:126
#, kde-format
msgid "Chris Ross"
msgstr "ਕਰਿਸ ਰੋਜ਼"
#: utils/kateglobal.cpp:126
#, kde-format
msgid "Highlighting for Ferite"
msgstr "Ferite ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:127
#, kde-format
msgid "Nick Roux"
msgstr "ਨਿਕ ਰੂਉਸ਼"
#: utils/kateglobal.cpp:127
#, kde-format
msgid "Highlighting for ILERPG"
msgstr "ILERPG ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:128
#, kde-format
msgid "Carsten Niehaus"
msgstr "ਕਾਰਸਟੀਨ ਨਿਊਹਾਉਸ"
#: utils/kateglobal.cpp:128
#, kde-format
msgid "Highlighting for LaTeX"
msgstr "LaTeX ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:129
#, kde-format
msgid "Per Wigren"
msgstr "ਪਿਰ ਵੀਗਰੀਨ"
#: utils/kateglobal.cpp:129
#, kde-format
msgid "Highlighting for Makefiles, Python"
msgstr "Makefiles, Python ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:130
#, kde-format
msgid "Jan Fritz"
msgstr "ਜਾਨ ਫਰੀਟਜ਼"
#: utils/kateglobal.cpp:130
#, kde-format
msgid "Highlighting for Python"
msgstr "ਪਾਈਥਨ ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:131
#, kde-format
msgid "Daniel Naber"
msgstr "ਡੈਨੀਅਲ ਨਾਬੀਰ"
#: utils/kateglobal.cpp:132
#, kde-format
msgid "Roland Pabel"
msgstr "ਰੋਲੈਂਡ ਪਾਬੀਲ"
#: utils/kateglobal.cpp:132
#, kde-format
msgid "Highlighting for Scheme"
msgstr "ਸਕੀਮ ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:133
#, kde-format
msgid "Cristi Dumitrescu"
msgstr "ਕਰੀਸਟੀ ਡੂਮੀਟਰਿਸਕੁ"
#: utils/kateglobal.cpp:133
#, kde-format
msgid "PHP Keyword/Datatype list"
msgstr "PHP Keyword/Datatype ਲਿਸਟ"
#: utils/kateglobal.cpp:134
#, kde-format
msgid "Carsten Pfeiffer"
msgstr "ਕਾਰਸਟੀਨ ਪਫੀਇੱਫੀਰ"
#: utils/kateglobal.cpp:134
#, kde-format
msgid "Very nice help"
msgstr "ਬਹੁਤ ਵਧੀਆ ਮਦਦ"
#: utils/kateglobal.cpp:135
#, kde-format
msgid "Bruno Massa"
msgstr ""
#: utils/kateglobal.cpp:135
#, kde-format
msgid "Highlighting for Lua"
msgstr "ਲੂਆ ਲਈ ਹਾਈਲਾਈਟਿੰਗ"
#: utils/kateglobal.cpp:137
#, kde-format
msgid "All people who have contributed and I have forgotten to mention"
msgstr "ਸਭ ਲੋਕ, ਜਿਨਾਂ ਦਾ ਯੋਗਦਾਨ ਰਿਹਾ ਹੈ, ਦਾ ਮੈਂ ਜ਼ਿਕਰ ਕਰਨਾ ਭੁੱਲ ਗਿਆ ਹਾਂ"
#: utils/kateglobal.cpp:139
#, kde-format
msgctxt "NAME OF TRANSLATORS"
msgid "Your names"
msgstr ""
"Amanpreet Singh Alam\n"
"Punjabi Open Source Team"
#: utils/kateglobal.cpp:139
#, kde-format
msgctxt "EMAIL OF TRANSLATORS"
msgid "Your emails"
msgstr "aalam@users.sf.net"
#: utils/kateglobal.cpp:261
#, kde-format
msgid "Configure"
msgstr "ਸੰਰਚਨਾ"
#: utils/katesedcmd.cpp:268
#, kde-format
msgid "replace with %1?"
msgstr "%1 ਨਾਲ ਬਦਲਣਾ ਹੈ?"
#: utils/katesedcmd.cpp:274
#, kde-format
msgctxt "%2 is the translation of the next message"
msgid "1 replacement done on %2"
msgid_plural "%1 replacements done on %2"
msgstr[0] "%2 ਉੱਤੇ 1 ਤਬਦੀਲੀ ਕੀਤੀ ਗਈ"
msgstr[1] "%2 ਉੱਤੇ %1 ਤਬਦੀਲੀਆਂ ਕੀਤੀਆਂ ਗਈਆਂ"
#: utils/katesedcmd.cpp:277
#, kde-format
msgctxt "substituted into the previous message"
msgid "1 line"
msgid_plural "%1 lines"
msgstr[0] "1 ਲਾਈਨ"
msgstr[1] "%1 ਲਾਈਨਾਂ"
#: utils/katevariableexpansionhelpers.cpp:129
#, kde-format
msgid "
This is a static word wrap, meaning the document is changed."
msgstr ""
#: view/kateview.cpp:517
#, kde-format
msgid "&Clean Indentation"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰੀ ਸਾਫ਼(&C)"
#: view/kateview.cpp:519
#, kde-format
msgid ""
"Use this to clean the indentation of a selected block of text (only tabs/"
"only spaces).
You can configure whether tabs should be honored "
"and used or replaced with spaces, in the configuration dialog."
msgstr ""
#: view/kateview.cpp:524
#, fuzzy, kde-format
#| msgid "Indentation Properties"
msgid "Convert Indentation to Spaces"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰੀ ਵਿਸ਼ੇਸ਼ਤਾ"
#: view/kateview.cpp:531
#, fuzzy, kde-format
#| msgid "&Indentation"
msgid "Convert Indentation to Tabs"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ(&I)"
#: view/kateview.cpp:546
#, fuzzy, kde-format
#| msgid "&Indentation"
msgid "&Format Indentation"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ(&I)"
#: view/kateview.cpp:547
#, kde-format
msgid ""
"Use this to auto indent the current line or block of text to its proper "
"indent level."
msgstr ""
#: view/kateview.cpp:551
#, fuzzy, kde-format
#| msgid "&Align"
msgctxt "@action"
msgid "&Align On…"
msgstr "ਇਕਸਾਰ(&A)"
#: view/kateview.cpp:553
#, kde-format
msgid ""
"This command aligns lines in the selected block or whole document on the "
"column given by a regular expression that you will be prompted for.
If you give an empty pattern it will align on the first non-blank "
"character by default.
If the pattern has a capture it will indent on "
"the captured match.
Examples:
With '-' it will insert "
"spaces before the first '-' of each lines to align them all on the same "
"column.
With ':\\s+(.)' it will insert spaces before the first non-"
"blank character that occurs after a colon to align them all on the same "
"column."
msgstr ""
#: view/kateview.cpp:564
#, kde-format
msgid "C&omment"
msgstr "ਟਿੱਪਣੀ(&o)"
#: view/kateview.cpp:567
#, kde-format
msgid ""
"This command comments out the current line or a selected block of text.
The characters for single/multiple line comments are defined within "
"the language's highlighting."
msgstr ""
#: view/kateview.cpp:572
#, fuzzy, kde-format
#| msgid "Move to Previous Line"
msgid "Go to Previous Editing Location"
msgstr "ਪਿਛਲੀ ਸਤਰ ਤੇ ਜਾਓ"
#: view/kateview.cpp:578
#, fuzzy, kde-format
#| msgid "Select to Next Line"
msgid "Go to Next Editing Location"
msgstr "ਅਗਲੀ ਸਤਰ ਤੇ ਜਾਓ"
#: view/kateview.cpp:584
#, kde-format
msgid "Unco&mment"
msgstr "ਬਿਨਾਂ-ਟਿੱਪਣੀ(&m)"
#: view/kateview.cpp:587
#, kde-format
msgid ""
"This command removes comments from the current line or a selected block of "
"text.
The characters for single/multiple line comments are "
"defined within the language's highlighting."
msgstr ""
#: view/kateview.cpp:592
#, kde-format
msgid "Toggle Comment"
msgstr "ਟਿੱਪਣੀ ਬਦਲੋ"
#: view/kateview.cpp:596
#, kde-format
msgid "&Read Only Mode"
msgstr "ਸਿਰਫ਼ ਪੜਨ ਲਈ ਹੀ ਢੰਗ(&R)"
#: view/kateview.cpp:597
#, kde-format
msgid "Lock/unlock the document for writing"
msgstr "ਲਿਖਣ ਲਈ ਡੌਕੂਮੈਂਟ ਤਾਲਾਬੰਦ ਕਰੋ/ਖੋਲ੍ਹੋ"
#: view/kateview.cpp:602
#, kde-format
msgid "&Force RTL Direction"
msgstr ""
#: view/kateview.cpp:603
#, fuzzy, kde-format
#| msgid "Text Selection Mode"
msgid "Force RTL Text Direction"
msgstr "ਟੈਕਸਟ ਚੋਣ ਮੋਡ"
#: view/kateview.cpp:613
#, kde-format
msgid "Uppercase"
msgstr "ਵੱਡੇ ਅੱਖਰ"
#: view/kateview.cpp:616
#, kde-format
msgid ""
"Convert the selection to uppercase, or the character to the right of the "
"cursor if no text is selected."
msgstr ""
"ਚੁਣੇ ਅੱਖਰਾਂ ਨੂੰ, ਜਾਂ ਜੇਕਰ ਕੋਈ ਪਾਠ ਦੀ ਚੋਣ ਨਾ ਕੀਤੀ ਗਈ ਤਾਂ ਕਰਸਰ ਦੇ ਸੱਜੇ ਪਾਸੇ ਦੇ ਅੱਖਰਾਂ ਨੂੰ ਵੱਡੇ ਰੂਪ "
"ਵਿੱਚ ਵੇਖੋ।"
#: view/kateview.cpp:622
#, kde-format
msgid "Lowercase"
msgstr "ਛੋਟੇ ਅੱਖਰ"
#: view/kateview.cpp:625
#, kde-format
msgid ""
"Convert the selection to lowercase, or the character to the right of the "
"cursor if no text is selected."
msgstr ""
"ਚੁਣੇ ਅੱਖਰਾਂ ਨੂੰ, ਜਾਂ ਜੇਕਰ ਕੋਈ ਪਾਠ ਦੀ ਚੋਣ ਨਾ ਕੀਤੀ ਗਈ ਤਾਂ ਕਰਸਰ ਦੇ ਸੱਜੇ ਪਾਸੇ ਦੇ ਅੱਖਰਾਂ ਨੂੰ ਛੋਟੇ ਰੂਪ "
"ਵਿੱਚ ਵੇਖੋ।"
#: view/kateview.cpp:631
#, kde-format
msgid "Capitalize"
msgstr "ਵੱਡੇ ਅੱਖਰ"
#: view/kateview.cpp:634
#, kde-format
msgid ""
"Capitalize the selection, or the word under the cursor if no text is "
"selected."
msgstr "ਚੋਣ ਦੇ ਅੱਖਰ ਵੱਡੇ ਕਰੋ ਜਾਂ ਕਰਸਰ ਦੇ ਹੇਠਾਂ ਮੌਜੂਦ ਅੱਖਰ ਨੂੰ, ਜੇਕਰ ਕਿਸੇ ਪਾਠ ਦੀ ਚੋਣ ਨਾ ਕੀਤੀ ਗਈ।"
#: view/kateview.cpp:639
#, kde-format
msgid "Join Lines"
msgstr "ਸਤਰਾਂ ਮੇਲੋ"
#: view/kateview.cpp:644
#, kde-format
msgid "Invoke Code Completion"
msgstr ""
#: view/kateview.cpp:645
#, kde-format
msgid ""
"Manually invoke command completion, usually by using a shortcut bound to "
"this action."
msgstr ""
#: view/kateview.cpp:650
#, fuzzy, kde-format
#| msgid "Re&move trailing spaces"
msgid "Remove Trailing Spaces"
msgstr "ਅੰਤਮ ਖਾਲੀ ਥਾਂ ਹਟਾਓ(&m)"
#: view/kateview.cpp:668
#, kde-format
msgid "Print the current document."
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਛਾਪੋ।"
#: view/kateview.cpp:671
#, fuzzy, kde-format
#| msgid "Print the current document."
msgid "Show print preview of current document"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਛਾਪੋ।"
#: view/kateview.cpp:675
#, kde-format
msgid "Reloa&d"
msgstr "ਮੁੜ-ਲੋਡ(&d)"
#: view/kateview.cpp:677
#, kde-format
msgid "Reload the current document from disk."
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਡਿਸਕ ਤੋਂ ਮੁੜ-ਲੋਡ ਕਰੋ।"
#: view/kateview.cpp:681
#, kde-format
msgid "Save the current document to disk, with a name of your choice."
msgstr "ਆਪਣੀ ਪਸੰਦ ਦੇ ਨਾਂ ਨਾਲ ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਨੂੰ ਡਿਸਕ ਤੇ ਸੰਭਾਲੋ।"
#: view/kateview.cpp:683
#, kde-format
msgctxt "@action"
msgid "Save As with Encodin&g…"
msgstr ""
#: view/kateview.cpp:689
#, fuzzy, kde-format
#| msgid "Save &Copy As..."
msgctxt "@action"
msgid "Save Cop&y As…"
msgstr "...ਵਜੋਂ ਕਾਪੀ ਇੰਝ ਸੰਭਾਲੋ(&C)"
#: view/kateview.cpp:690
#, fuzzy, kde-format
#| msgid "Reload the current document from disk."
msgid "Save a copy of the current document to disk."
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਡਿਸਕ ਤੋਂ ਮੁੜ-ਲੋਡ ਕਰੋ।"
#: view/kateview.cpp:694
#, kde-format
msgid ""
"This command opens a dialog and lets you choose a line that you want the "
"cursor to move to."
msgstr ""
"ਇਹ ਕਮਾਂਡ ਡਾਈਲਾਗ ਖੋਲ੍ਹਦੀ ਅਤੇ ਤੁਹਾਨੂੰ ਇੱਕ ਲਾਈਨ ਦੀ ਚੋਣ ਕਰਨ ਦੇਵੇਗੀ, ਜਿੱਥੇ ਤੁਸੀਂ ਕਰਸਰ ਭੇਜਣੀ ਚਾਹੁੰਦੇ "
"ਹੋ।"
#: view/kateview.cpp:698
#, fuzzy, kde-format
#| msgid "Move to Previous Line"
msgid "Go to Previous Modified Line"
msgstr "ਪਿਛਲੀ ਸਤਰ ਤੇ ਜਾਓ"
#: view/kateview.cpp:699
#, fuzzy, kde-format
#| msgid "Move to Matching Bracket"
msgid "Move upwards to the previous modified line."
msgstr "ਮਿਲਦੀ ਬਰੈਕਟ 'ਤੇ ਜਾਓ"
#: view/kateview.cpp:704
#, fuzzy, kde-format
#| msgid "Move to Next Line"
msgid "Go to Next Modified Line"
msgstr "ਅਗਲੀ ਸਤਰ ਤੇ ਜਾਓ"
#: view/kateview.cpp:705
#, kde-format
msgid "Move downwards to the next modified line."
msgstr ""
#: view/kateview.cpp:709
#, fuzzy, kde-format
#| msgid "&Configure Editor..."
msgctxt "@action"
msgid "&Configure Editor…"
msgstr "ਸੰਪਾਦਕ ਸੰਰਚਨਾ(&C)..."
#: view/kateview.cpp:711
#, kde-format
msgid "Configure various aspects of this editor."
msgstr "ਇਸ ਸੰਪਾਦਕ ਦੇ ਕਈ ਗੁਣਾਂ ਦੀ ਸੰਰਚਨਾ ਹੈ।"
#: view/kateview.cpp:714
#, kde-format
msgid "&Mode"
msgstr "ਮੋਡ(&M)"
#: view/kateview.cpp:720
#, kde-format
msgid "&Highlighting"
msgstr "ਉਘਾੜਨ(&H)"
#: view/kateview.cpp:722
#, kde-format
msgid "Here you can choose how the current document should be highlighted."
msgstr "ਇੱਥੇ ਤੁਸੀਂ ਚੁਣ ਸਕਦੇ ਹੋ ਕਿ ਮੌਜੂਦਾ ਡੌਕੂਮੈਂਟ ਨੂੰ ਕਿਵੇਂ ਉਘਾੜਨਾ ਚਾਹੀਦਾ ਹੈ।"
#: view/kateview.cpp:725
#, fuzzy, kde-format
#| msgid "Colors"
msgid "&Editor Color Theme"
msgstr "ਰੰਗ"
#: view/kateview.cpp:731
#, kde-format
msgid "&Indentation"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ(&I)"
#: view/kateview.cpp:738
#, kde-format
msgid "Select the entire text of the current document."
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਵਿੱਚ ਸਾਰਾ ਪਾਠ ਚੁਣੋ।"
#: view/kateview.cpp:741
#, kde-format
msgid ""
"If you have selected something within the current document, this will no "
"longer be selected."
msgstr "ਜੇਕਰ ਤੁਸੀਂ ਮੌਜੂਦਾ ਡੌਕੂਮੈਂਟ ਵਿੱਚ ਕਿਸੇ ਦੀ ਚੋਣ ਕੀਤੀ ਤਾਂ ਇਹ ਚੁਣਿਆ ਨਹੀਂ ਰਹੇਗਾ।"
#: view/kateview.cpp:745
#, kde-format
msgid "Enlarge Font"
msgstr "ਫੋਂਟ ਆਕਾਰ ਵਧਾਓ"
#: view/kateview.cpp:747
#, kde-format
msgid "This increases the display font size."
msgstr "ਇਸ ਨਾਲ ਫੋਂਟ ਆਕਾਰ ਵੱਧ ਜਾਵੇਗਾ।"
#: view/kateview.cpp:754
#, kde-format
msgid "Shrink Font"
msgstr "ਫੋਂਟ ਸੁੰਘੜੋ"
#: view/kateview.cpp:756
#, kde-format
msgid "This decreases the display font size."
msgstr "ਇਸ ਨਾਲ ਫੋਂਟ ਆਕਾਰ ਘੱਟ ਜਾਵੇਗਾ।"
#: view/kateview.cpp:763
#, kde-format
msgid "Reset Font Size"
msgstr ""
#: view/kateview.cpp:765
#, fuzzy, kde-format
#| msgid "This increases the display font size."
msgid "This resets the display font size."
msgstr "ਇਸ ਨਾਲ ਫੋਂਟ ਆਕਾਰ ਵੱਧ ਜਾਵੇਗਾ।"
#: view/kateview.cpp:768
#, kde-format
msgid "Bl&ock Selection Mode"
msgstr "ਬਲਾਕ ਚੋਣ ਢੰਗ(&o)"
#: view/kateview.cpp:771
#, kde-format
msgid ""
"This command allows switching between the normal (line based) selection mode "
"and the block selection mode."
msgstr ""
#: view/kateview.cpp:775
#, fuzzy, kde-format
#| msgid "Vi Input Mode"
msgid "Switch to Next Input Mode"
msgstr "Vi ਇੰਪੁੱਟ ਮੋਡ"
#: view/kateview.cpp:777
#, fuzzy, kde-format
#| msgctxt "short translation please"
#| msgid "Sets the end of line mode."
msgid "Switch to the next input mode."
msgstr "ਲਾਈਨ ਦਾ ਅੰਤ ਸੈੱਟ ਕਰਦਾ ਹੈ।"
#: view/kateview.cpp:780
#, kde-format
msgid "Overwr&ite Mode"
msgstr "ਉੱਤੇ ਲਿਖਣ ਢੰਗ(&i)"
#: view/kateview.cpp:783
#, kde-format
msgid ""
"Choose whether you want the text you type to be inserted or to overwrite "
"existing text."
msgstr ""
#: view/kateview.cpp:787
#, fuzzy, kde-format
#| msgid "&Spaces"
msgid "Show Whitespace"
msgstr "ਖਾਲੀ ਥਾਂ(&S)"
#: view/kateview.cpp:790
#, fuzzy, kde-format
#| msgid ""
#| "Show/hide the marks on the vertical scrollbar.
The marks show "
#| "bookmarks, for instance."
msgid ""
"If this option is checked, whitespaces in this document will be visible.
This is only a view option, meaning the document will not be changed."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#: view/kateview.cpp:794
#, kde-format
msgid "&Dynamic Word Wrap"
msgstr "ਸਫਰੀ ਸ਼ਬਦ ਸਮੇਟੋ(&D)"
#: view/kateview.cpp:798
#, fuzzy, kde-format
#| msgid ""
#| "Show/hide the marks on the vertical scrollbar.
The marks show "
#| "bookmarks, for instance."
msgid ""
"If this option is checked, the text lines will be wrapped at the view border "
"on the screen.
This is only a view option, meaning the document "
"will not be changed."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#: view/kateview.cpp:802
#, kde-format
msgid "Dynamic Word Wrap Indicators"
msgstr "ਸਫਰੀ ਸ਼ਬਦ ਸਮੇਟੋ ਸੰਕੇਤਕ"
#: view/kateview.cpp:804
#, kde-format
msgid "Choose when the Dynamic Word Wrap Indicators should be displayed"
msgstr "ਚੁਣੋ ਕਿ ਕਦੋਂ ਸਫ਼ਰੀ ਸ਼ਬਦ ਸਮੇਟਣ ਸੂਚਕ ਨੂੰ ਵਿਖਾਇਆ ਜਾਵੇ"
#: view/kateview.cpp:806
#, kde-format
msgid "&Off"
msgstr "ਬੰਦ(&O)"
#: view/kateview.cpp:806
#, kde-format
msgid "Follow &Line Numbers"
msgstr "ਲਾਈਨ ਨੰਬਰ ਨੂੰ ਵੇਖੋ(&L)"
#: view/kateview.cpp:806
#, kde-format
msgid "&Always On"
msgstr "ਹਮੇਸ਼ਾ ਚਾਲੂ(&A)"
#: view/kateview.cpp:810
#, kde-format
msgid "Static Word Wrap"
msgstr "ਸਥਿਰ ਸ਼ਬਦ ਸਮੇਟੋ"
#: view/kateview.cpp:812
#, fuzzy, kde-format
#| msgid ""
#| "Show/hide the marks on the vertical scrollbar.
The marks show "
#| "bookmarks, for instance."
msgid ""
"If this option is checked, the text lines will be wrapped at the column "
"defined in the editing properties."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#: view/kateview.cpp:819
#, kde-format
msgid "Show Static &Word Wrap Marker"
msgstr "ਸਥਿਰ ਸ਼ਬਦ ਸਮੇਟਣ ਮਾਰਕਰ ਵਿਖਾਓ(&W)"
#: view/kateview.cpp:822
#, kde-format
msgid ""
"Show/hide the Word Wrap Marker, a vertical line drawn at the word wrap "
"column as defined in the editing properties"
msgstr ""
#: view/kateview.cpp:826
#, kde-format
msgid "Show Folding &Markers"
msgstr "ਫੋਲਡਿੰਗ ਮਾਰਕਰ ਵੇਖੋ(&M)"
#: view/kateview.cpp:828
#, kde-format
msgid ""
"You can choose if the codefolding marks should be shown, if codefolding is "
"possible."
msgstr ""
#: view/kateview.cpp:831
#, kde-format
msgid "Show &Icon Border"
msgstr "ਆਈਕਾਨ ਬਾਰਡਰ ਵੇਖੋ(&I)"
#: view/kateview.cpp:833
#, kde-format
msgid ""
"Show/hide the icon border.
The icon border shows bookmark "
"symbols, for instance."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#: view/kateview.cpp:836
#, kde-format
msgid "Show &Line Numbers"
msgstr "ਲਾਈਨ ਨੰਬਰ ਵੇਖੋ(&L)"
#: view/kateview.cpp:838
#, kde-format
msgid "Show/hide the line numbers on the left hand side of the view."
msgstr "ਝਲਕ ਦੇ ਖੱਬੇ ਹੱਥ ਸਤਰ ਨੂੰ ਵੇਖੋ/ਓਹਲੇ ਕਰੋ।"
#: view/kateview.cpp:841
#, kde-format
msgid "Show Scroll&bar Marks"
msgstr "ਸਕਰੋਲਬਾਰ ਮਾਰਕ ਵੇਖੋ(&b)"
#: view/kateview.cpp:843
#, kde-format
msgid ""
"Show/hide the marks on the vertical scrollbar.
The marks show "
"bookmarks, for instance."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#: view/kateview.cpp:846
#, fuzzy, kde-format
#| msgid "Show Scroll&bar Marks"
msgid "Show Scrollbar Mini-Map"
msgstr "ਸਕਰੋਲਬਾਰ ਮਾਰਕ ਵੇਖੋ(&b)"
#: view/kateview.cpp:848
#, fuzzy, kde-format
#| msgid ""
#| "Show/hide the marks on the vertical scrollbar.
The marks show "
#| "bookmarks, for instance."
msgid ""
"Show/hide the mini-map on the vertical scrollbar.
The mini-map "
"shows an overview of the whole document."
msgstr "ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਵੇਖੋ/ਓਹਲੇ।
ਮੌਕੇ ਤੇ ਆਈਕਾਨ ਹਾਸ਼ੀਆ ਬੁੱਕਮਾਰਕ ਨਿਸ਼ਾਨ ਵੇਖਾਏਗਾ।"
#. i18n("Show the whole document in the Mini-Map"), this);
#. ac->addAction(QLatin1String("view_scrollbar_minimap_all"), a);
#. a->setWhatsThis(i18n("Display the whole document in the mini-map.
With this option set the whole document will be visible in the
#. mini-map.")); connect(a, SIGNAL(triggered(bool)), SlOT(toggleScrollBarMiniMapAll())); connect(m_toggleScrollBarMiniMap, SIGNAL(triggered(bool)),
#. m_toggleScrollBarMiniMapAll, SLOT(setEnabled(bool)));
#: view/kateview.cpp:860
#, kde-format
msgid "Show Non-Printable Spaces"
msgstr ""
#: view/kateview.cpp:862
#, kde-format
msgid "Show/hide bounding box around non-printable spaces"
msgstr ""
#: view/kateview.cpp:866
#, kde-format
msgid "Switch to Command Line"
msgstr "ਕਮਾਂਡ ਲਾਈਨ ਤੇ ਜਾਓ"
#: view/kateview.cpp:868
#, kde-format
msgid "Show/hide the command line on the bottom of the view."
msgstr "ਦਿੱਖ ਦੇ ਹੇਠਾਂ ਕਮਾਂਡ ਲਾਈਨ ਵੇਖੋ/ਓਹਲੇ।"
#: view/kateview.cpp:871
#, kde-format
msgid "Input Modes"
msgstr "ਇੰਪੁੱਟ ਮੋਡ"
#: view/kateview.cpp:880
#, kde-format
msgid "Activate/deactivate %1"
msgstr ""
#: view/kateview.cpp:890
#, kde-format
msgid "&End of Line"
msgstr "ਸਤਰ ਦਾ ਅੰਤ(&E)"
#: view/kateview.cpp:892
#, kde-format
msgid "Choose which line endings should be used, when you save the document"
msgstr ""
#: view/kateview.cpp:893
#, kde-format
msgctxt "@item:inmenu End of Line"
msgid "&UNIX"
msgstr "&UNIX"
#: view/kateview.cpp:894
#, kde-format
msgctxt "@item:inmenu End of Line"
msgid "&Windows/DOS"
msgstr "&Windows/DOS"
#: view/kateview.cpp:895
#, kde-format
msgctxt "@item:inmenu End of Line"
msgid "&Macintosh"
msgstr "&Macintosh"
#: view/kateview.cpp:900
#, kde-format
msgid "Add &Byte Order Mark (BOM)"
msgstr ""
#: view/kateview.cpp:903
#, kde-format
msgid ""
"Enable/disable adding of byte order marks for UTF-8/UTF-16 encoded files "
"while saving"
msgstr ""
#: view/kateview.cpp:907
#, kde-format
msgid "E&ncoding"
msgstr "ਇੰਕੋਡਿੰਗ(&n)"
#: view/kateview.cpp:911
#, kde-format
msgid "Look up the first occurrence of a piece of text or regular expression."
msgstr "ਪਾਠ ਦੇ ਭਾਗ ਜਾਂ ਨਿਯਮਤ ਸਮੀਕਰਨ ਦੀ ਪਹਿਲੀਂ ਮੌਜੂਦਗੀ ਲਈ ਖੋਜ ਹੈ।"
#: view/kateview.cpp:915
#, kde-format
msgid "Find Selected"
msgstr "ਚੁਣਿਆ ਖੋਜ"
#: view/kateview.cpp:917
#, kde-format
msgid "Finds next occurrence of selected text."
msgstr ""
#: view/kateview.cpp:921
#, kde-format
msgid "Find Selected Backwards"
msgstr "ਚੁਣੇ ਦੀ ਪਿੱਛੇ ਖੋਜ"
#: view/kateview.cpp:923
#, kde-format
msgid "Finds previous occurrence of selected text."
msgstr "ਚੁਣੇ ਟੈਕਸਟ ਦੀ ਪਿਛਲੀ ਮੌਜੂਦਗੀ ਦੀ ਖੋਜ।"
#: view/kateview.cpp:927
#, kde-format
msgid "Find and Select Next Occurrence"
msgstr ""
#: view/kateview.cpp:929
#, kde-format
msgid "Finds next occurrence of the word under cursor and add it to selection."
msgstr ""
#: view/kateview.cpp:933
#, kde-format
msgid "Mark Currently Selected Occurrence as Skipped"
msgstr ""
#: view/kateview.cpp:935
#, kde-format
msgid "Marks the currently selected word as skipped."
msgstr ""
#: view/kateview.cpp:939
#, kde-format
msgid "Find and Select All Occurrences"
msgstr ""
#: view/kateview.cpp:941
#, kde-format
msgid "Finds all occurrences of the word under cursor and selects them."
msgstr ""
#: view/kateview.cpp:945
#, kde-format
msgid "Look up the next occurrence of the search phrase."
msgstr "ਖੋਜ ਪੈਰੇ ਦੀ ਪਹਿਲੀਂ ਮੌਜੂਦਗੀ ਲਈ ਖੋਜ ਹੈ।"
#: view/kateview.cpp:949
#, kde-format
msgid "Look up the previous occurrence of the search phrase."
msgstr "ਖੋਜ ਪੈਰੇ ਦੀ ਪਿਛਲੀ ਮੌਜੂਦਗੀ ਲਈ ਖੋਜ ਹੈ।"
#: view/kateview.cpp:953
#, kde-format
msgid ""
"Look up a piece of text or regular expression and replace the result with "
"some given text."
msgstr ""
#: view/kateview.cpp:956
#, kde-format
msgid "Add Cursors to Line Ends"
msgstr ""
#: view/kateview.cpp:958
#, kde-format
msgid "Creates a cursor at the end of every line in selection."
msgstr ""
#: view/kateview.cpp:962
#, kde-format
msgid "Add Caret below Cursor"
msgstr ""
#: view/kateview.cpp:964
#, fuzzy, kde-format
#| msgid "Select the entire text of the current document."
msgid "Adds a caret in the line below the current caret."
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਵਿੱਚ ਸਾਰਾ ਪਾਠ ਚੁਣੋ।"
#: view/kateview.cpp:968
#, kde-format
msgid "Add Caret above Cursor"
msgstr ""
#: view/kateview.cpp:970
#, kde-format
msgid "Adds a caret in the line above the current caret."
msgstr ""
#: view/kateview.cpp:974
#, fuzzy, kde-format
#| msgid "Text Cursor Movement"
msgid "Toggle Camel Case Cursor Movement"
msgstr "ਟੈਕਸਟ ਕਰਸਰ ਏਧਰ-ਓਧਰ"
#: view/kateview.cpp:975
#, kde-format
msgid "Toggle between normal word movement and camel case cursor movement."
msgstr ""
#: view/kateview.cpp:979
#, fuzzy, kde-format
#| msgid "Move to Matching Bracket"
msgid "Remove Cursors from Empty Lines"
msgstr "ਮਿਲਦੀ ਬਰੈਕਟ 'ਤੇ ਜਾਓ"
#: view/kateview.cpp:980
#, fuzzy, kde-format
#| msgid "Move to Matching Bracket"
msgid "Remove cursors from empty lines"
msgstr "ਮਿਲਦੀ ਬਰੈਕਟ 'ਤੇ ਜਾਓ"
#: view/kateview.cpp:984
#, kde-format
msgid "Automatic Spell Checking"
msgstr "ਆਟੋਮੈਟਿਕ ਸਪੈਲ ਚੈਕਿੰਗ"
#: view/kateview.cpp:985
#, kde-format
msgid "Enable/disable automatic spell checking"
msgstr ""
#: view/kateview.cpp:991
#, fuzzy, kde-format
#| msgid "Change Dictionary..."
msgctxt "@action"
msgid "Change Dictionary…"
msgstr "ਡਿਕਸ਼ਨਰੀ ਬਦਲੋ..."
#: view/kateview.cpp:992
#, kde-format
msgid "Change the dictionary that is used for spell checking."
msgstr ""
#: view/kateview.cpp:996
#, kde-format
msgid "Clear Dictionary Ranges"
msgstr ""
#: view/kateview.cpp:998
#, kde-format
msgid ""
"Remove all the separate dictionary ranges that were set for spell checking."
msgstr ""
#: view/kateview.cpp:1004
#, kde-format
msgid "Copy as &HTML"
msgstr "&HTML ਵਾਂਗ ਕਾਪੀ ਕਰੋ"
#: view/kateview.cpp:1005
#, kde-format
msgid ""
"Use this command to copy the currently selected text as HTML to the system "
"clipboard."
msgstr ""
#: view/kateview.cpp:1009
#, fuzzy, kde-format
#| msgid "E&xport as HTML..."
msgctxt "@action"
msgid "E&xport as HTML…"
msgstr "...ਵਜੋਂ HTML ਵਜੋਂ ਐਕਸਪੋਰਟ"
#: view/kateview.cpp:1011
#, kde-format
msgid ""
"This command allows you to export the current document with all highlighting "
"information into a HTML document."
msgstr ""
#: view/kateview.cpp:1050
#, kde-format
msgid "Move Word Left"
msgstr "ਸ਼ਬਦ ਖੱਬੇ ਭੇਜੋ"
#: view/kateview.cpp:1056
#, kde-format
msgid "Select Character Left"
msgstr "ਅੱਖਰ ਖੱਬੇ ਚੁਣੋ"
#: view/kateview.cpp:1062
#, kde-format
msgid "Select Word Left"
msgstr "ਸ਼ਬਦ ਖੱਬੇ ਚੁਣੋ"
#: view/kateview.cpp:1068
#, kde-format
msgid "Move Word Right"
msgstr "ਸ਼ਬਦ ਸੱਜੇ ਭੇਜੋ"
#: view/kateview.cpp:1074
#, kde-format
msgid "Select Character Right"
msgstr "ਅੱਖਰ ਸੱਜੇ ਚੁਣੋ"
#: view/kateview.cpp:1080
#, kde-format
msgid "Select Word Right"
msgstr "ਸ਼ਬਦ ਸੱਜੇ ਚੁਣੋ"
#: view/kateview.cpp:1086
#, fuzzy, kde-format
#| msgid "Language Selection"
msgid "Start the Marked Selection"
msgstr "ਭਾਸ਼ਾ ਚੋਣ"
#: view/kateview.cpp:1087
#, kde-format
msgid ""
"Emulate the Emacs-like selection mode, where the beginning is marked and "
"then the selection is continuously updated."
msgstr ""
#: view/kateview.cpp:1092
#, kde-format
msgid "Move to Beginning of Line"
msgstr "ਸਤਰ ਦੇ ਸ਼ੁਰੂ 'ਤੇ ਜਾਓ"
#: view/kateview.cpp:1098
#, kde-format
msgid "Move to Beginning of Document"
msgstr "ਡੌਕੂਮੈਂਟ ਦੇ ਸ਼ੁਰੂ 'ਤੇ ਜਾਓ"
#: view/kateview.cpp:1104
#, kde-format
msgid "Select to Beginning of Line"
msgstr "ਸਤਰ ਦੇ ਸ਼ੁਰੂ ਵਿੱਚ ਜਾਓ"
#: view/kateview.cpp:1110
#, kde-format
msgid "Select to Beginning of Document"
msgstr "ਦਸਤਾਵੇਜ਼ ਦੀ ਸ਼ੁਰੂਆਤ ਚੁਣੋ"
#: view/kateview.cpp:1116
#, kde-format
msgid "Move to End of Line"
msgstr "ਸਤਰ ਦੇ ਅੰਤ 'ਤੇ ਜਾਓ"
#: view/kateview.cpp:1122
#, kde-format
msgid "Move to End of Document"
msgstr "ਦਸਤਾਵੇਜ਼ ਦੇ ਅੰਤ 'ਤੇ ਜਾਓ"
#: view/kateview.cpp:1128
#, kde-format
msgid "Select to End of Line"
msgstr "ਸਤਰ ਦਾ ਅੰਤ ਚੁਣੋ"
#: view/kateview.cpp:1134
#, kde-format
msgid "Select to End of Document"
msgstr "ਦਸਤਾਵੇਜ਼ ਦਾ ਅੰਤ ਚੁਣੋ"
#: view/kateview.cpp:1140
#, kde-format
msgid "Select to Previous Line"
msgstr "ਪਿਛਲੀ ਸਤਰ ਚੁਣੋ"
#: view/kateview.cpp:1146
#, kde-format
msgid "Scroll Line Up"
msgstr "ਸਤਰਾਂ ਉੱਤੇ ਸਮੇਟੋ"
#: view/kateview.cpp:1152
#, kde-format
msgid "Move to Next Line"
msgstr "ਅਗਲੀ ਸਤਰ ਤੇ ਜਾਓ"
#: view/kateview.cpp:1158
#, kde-format
msgid "Move to Previous Line"
msgstr "ਪਿਛਲੀ ਸਤਰ ਤੇ ਜਾਓ"
#: view/kateview.cpp:1164
#, kde-format
msgid "Move Cursor Right"
msgstr "ਕਰਸਰ ਸੱਜੇ ਭੇਜੋ"
#: view/kateview.cpp:1170
#, kde-format
msgid "Move Cursor Left"
msgstr "ਕਰਸਰ ਖੱਬੇ ਭੇਜੋ"
#: view/kateview.cpp:1176
#, kde-format
msgid "Select to Next Line"
msgstr "ਅਗਲੀ ਸਤਰ ਤੇ ਜਾਓ"
#: view/kateview.cpp:1182
#, kde-format
msgid "Scroll Line Down"
msgstr "ਸਤਰ ਹੇਠਾਂ ਸਮੇਟੋ"
#: view/kateview.cpp:1188
#, kde-format
msgid "Scroll Page Up"
msgstr "ਸਫ਼ਾ ਉਪਰ ਸਮੇਟੋ"
#: view/kateview.cpp:1194
#, kde-format
msgid "Select Page Up"
msgstr "ਸਫ਼ਾ ਉੱਤੇ ਚੁਣੋ"
#: view/kateview.cpp:1200
#, kde-format
msgid "Move to Top of View"
msgstr "ਝਲਕ ਦੇ ਉੱਤੇ ਜਾਓ"
#: view/kateview.cpp:1206
#, kde-format
msgid "Select to Top of View"
msgstr "ਝਲਕ ਦੇ ਉੱਤੇ ਤੋਂ ਚੁਣੋ"
#: view/kateview.cpp:1212
#, kde-format
msgid "Scroll Page Down"
msgstr "ਸਫ਼ਾ ਹੇਠਾਂ ਲੈ ਕੇ ਜਾਓ"
#: view/kateview.cpp:1218
#, kde-format
msgid "Select Page Down"
msgstr "ਸਫ਼ਾ ਹੇਠਾਂ ਚੁਣੋ"
#: view/kateview.cpp:1224
#, kde-format
msgid "Move to Bottom of View"
msgstr "ਝਲਕ ਦੇ ਹੇਠਾਂ ਜਾਓ"
#: view/kateview.cpp:1230
#, kde-format
msgid "Select to Bottom of View"
msgstr "ਝਲਕ ਦੇ ਹੇਠਾਂ ਦੀ ਚੋਣ ਕਰੋ"
#: view/kateview.cpp:1236
#, fuzzy, kde-format
#| msgid "Move to Matching Bracket"
msgid "Go to Matching Bracket"
msgstr "ਮਿਲਦੀ ਬਰੈਕਟ 'ਤੇ ਜਾਓ"
#: view/kateview.cpp:1242
#, kde-format
msgid "Select to Matching Bracket"
msgstr "ਮਿਲਦੀ ਬਰੈਕਟ ਚੁਣੋ"
#: view/kateview.cpp:1250
#, kde-format
msgid "Transpose Characters"
msgstr "ਅੱਖਰ ਟਰਾਂਸਪੋਜ਼"
#: view/kateview.cpp:1255
#, fuzzy, kde-format
#| msgid "Transpose Characters"
msgid "Transpose Words"
msgstr "ਅੱਖਰ ਟਰਾਂਸਪੋਜ਼"
#: view/kateview.cpp:1260
#, kde-format
msgid "Delete Line"
msgstr "ਲਾਈਨ ਹਟਾਓ"
#: view/kateview.cpp:1266
#, kde-format
msgid "Delete Word Left"
msgstr "ਖੱਬਾ ਸ਼ਬਦ ਹਟਾਉ"
#: view/kateview.cpp:1272
#, kde-format
msgid "Delete Word Right"
msgstr "ਸੱਜਾ ਸ਼ਬਦ ਹਟਾਓ"
#: view/kateview.cpp:1278
#, kde-format
msgid "Delete Next Character"
msgstr "ਅੱਗੇ ਅੱਖਰ ਹਟਾਓ"
#: view/kateview.cpp:1284
#, kde-format
msgid "Backspace"
msgstr "ਬੈਕਸਪੇਸ"
#: view/kateview.cpp:1292
#, fuzzy, kde-format
#| msgid "Insert Tab"
msgid "Insert Tab Character"
msgstr "ਟੈਬ ਸ਼ਾਮਲ"
#: view/kateview.cpp:1297
#, kde-format
msgid "Insert Smart Newline"
msgstr ""
#: view/kateview.cpp:1298
#, kde-format
msgid ""
"Insert newline including leading characters of the current line which are "
"not letters or numbers."
msgstr ""
#: view/kateview.cpp:1306
#, kde-format
msgid "Insert a Non-Indented Newline"
msgstr ""
#: view/kateview.cpp:1307
#, kde-format
msgid ""
"Insert a new line without indentation, regardless of indentation settings."
msgstr ""
#: view/kateview.cpp:1315
#, kde-format
msgid "Insert a Newline Above Current Line"
msgstr ""
#: view/kateview.cpp:1316
#, kde-format
msgid ""
"Insert a new line above current line without modifying the current line."
msgstr ""
#: view/kateview.cpp:1324
#, kde-format
msgid "Insert a Newline Below Current Line"
msgstr ""
#: view/kateview.cpp:1325
#, kde-format
msgid ""
"Insert a new line below current line without modifying the current line."
msgstr ""
#: view/kateview.cpp:1334
#, kde-format
msgid "&Indent"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ(&I)"
#: view/kateview.cpp:1336
#, kde-format
msgid ""
"Use this to indent a selected block of text.
You can configure "
"whether tabs should be honored and used or replaced with spaces, in the "
"configuration dialog."
msgstr ""
#: view/kateview.cpp:1343
#, kde-format
msgid "&Unindent"
msgstr "ਹਾਸ਼ੀਏ ਤੋਂ ਦੂਰ ਨਹੀਂ(&U)"
#: view/kateview.cpp:1344
#, kde-format
msgid "Use this to unindent a selected block of text."
msgstr ""
#: view/kateview.cpp:1362
#, fuzzy, kde-format
#| msgid "Collapse Toplevel"
msgid "Fold Toplevel Nodes"
msgstr "ਉਪਰੀ ਪੱਧਰ ਸਮੇਟੋ"
#: view/kateview.cpp:1366
#, fuzzy, kde-format
#| msgid "Expand Toplevel"
msgid "Unfold Toplevel Nodes"
msgstr "ਉਪਰੀ ਪੱਧਰ ਫੈਲਾਉ"
#: view/kateview.cpp:1370
#, fuzzy, kde-format
#| msgid "Current line:"
msgid "Toggle Current Node"
msgstr "ਮੌਜੂਦਾ ਲਾਈਨ:"
#: view/kateview.cpp:1374
#, fuzzy, kde-format
#| msgid "Toggle Comment"
msgid "Toggle Contained Nodes"
msgstr "ਟਿੱਪਣੀ ਬਦਲੋ"
#: view/kateview.cpp:1383
#, fuzzy, kde-format
#| msgid "Select the entire text of the current document."
msgid "Say current selection or document"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਵਿੱਚ ਸਾਰਾ ਪਾਠ ਚੁਣੋ।"
#: view/kateview.cpp:1393
#, fuzzy, kde-format
#| msgid "Save the current document"
msgid "Stop current output"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਸੰਭਾਲੋ"
#: view/kateview.cpp:1399
#, fuzzy, kde-format
#| msgid "Save the current document"
msgid "Pause current output"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਸੰਭਾਲੋ"
#: view/kateview.cpp:1405
#, fuzzy, kde-format
#| msgid "Save the current document"
msgid "Resume current output"
msgstr "ਮੌਜੂਦਾ ਦਸਤਾਵੇਜ਼ ਸੰਭਾਲੋ"
#: view/kateview.cpp:1576
#, kde-format
msgid "(R/O) %1"
msgstr ""
#: view/kateview.cpp:1764
#, kde-format
msgid "Camel case movement disabled"
msgstr ""
#: view/kateview.cpp:1766
#, kde-format
msgid "Camel case movement enabled"
msgstr ""
#: view/kateview.cpp:2301
#, fuzzy, kde-format
#| msgid "Search mode"
msgid "Search wrapped"
msgstr "ਖੋਜ ਮੋਡ"
#: view/kateview.cpp:3884
#, fuzzy, kde-format
#| msgid "&Align"
msgid "Align On"
msgstr "ਇਕਸਾਰ(&A)"
#: view/kateview.cpp:3884
#, kde-format
msgid "Alignment pattern:"
msgstr ""
#: view/kateview.cpp:4961
#, kde-format
msgid "Export File as HTML"
msgstr "HTML ਵਾਂਗ ਫਾਇਲ ਨਿਰਯਾਤ"
#: view/kateviewhelpers.cpp:296 view/kateviewhelpers.cpp:345
#: view/kateviewhelpers.cpp:1005
#, kde-format
msgctxt "from line - to line"
msgid "
—
%2'help <command>'
"
"p>"
msgstr "'help <command>'
ਵਰਤੋਂ
Syntax: command "
"[ arguments ]
For a list of available commands, enter "
"help list
For help for individual commands, enter "
"help <command>
w — writes the current document to disk
"
"wa — writes all documents to disk.
q — closes the current view.
qa — "
"closes all views, effectively quitting the application.
wq "
"— writes the current document to disk and closes its view.
"
"wqa — writes all documents to disk and quits.
x — closes the current view.
xa"
"tt> — closes all views, effectively quitting the application.
"
"new — splits the view horizontally and opens a new document."
"
vnew — splits the view vertically and opens a new "
"document.
has been detected in the file %1 at %2/%3"
#~ "qt>"
#~ msgstr "
ਗਲਤੀ %2/%3 ਉੱਤੇ ਮਿਲੀ ਹੈ।