# kdesrc-build running: 'ninja' '-j' '8' # from directory: /opt/kde/build/kwindowsystem [1/298] Generating ECMPoQm/ar/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [2/298] Generating ECMPoQm/ast/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [3/298] Generating ECMPoQm/az/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [4/298] Generating ECMPoQm/bg/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [5/298] Generating ECMPoQm/as/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [6/298] Generating ECMPoQm/be@latin/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [7/298] Generating ECMPoQm/bn_IN/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [8/298] Generating ECMPoQm/bs/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [9/298] Generating ECMPoQm/ca/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [10/298] Generating ECMPoQm/ca@valencia/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [11/298] Generating ECMPoQm/cs/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [12/298] Generating ECMPoQm/bn/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [13/298] Generating ECMPoQm/be/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [14/298] Generating ECMPoQm/crh/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [15/298] Generating ECMPoQm/br/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [16/298] Generating ECMPoQm/af/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [17/298] Generating ECMPoQm/csb/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [18/298] Generating ECMPoQm/eo/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [19/298] Generating ECMPoQm/cy/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [20/298] Generating ECMPoQm/el/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [21/298] Generating ECMPoQm/da/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [22/298] Generating ECMPoQm/eu/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [23/298] Generating ECMPoQm/de/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [24/298] Generating ECMPoQm/fa/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [25/298] Generating ECMPoQm/es/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [26/298] Generating ECMPoQm/gd/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [27/298] Generating ECMPoQm/fy/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [28/298] Generating ECMPoQm/en_GB/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [29/298] Generating ECMPoQm/fi/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [30/298] Generating ECMPoQm/ha/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [31/298] Generating ECMPoQm/he/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [32/298] Generating ECMPoQm/et/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [33/298] Generating ECMPoQm/fr/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [34/298] Generating ECMPoQm/gu/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [35/298] Generating ECMPoQm/hi/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [36/298] Generating ECMPoQm/hne/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [37/298] Generating ECMPoQm/gl/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [38/298] Generating ECMPoQm/ga/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [39/298] Generating ECMPoQm/hu/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [40/298] Generating ECMPoQm/hy/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [41/298] Generating ECMPoQm/ia/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [42/298] Generating ECMPoQm/ka/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [43/298] Generating ECMPoQm/ja/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [44/298] Generating ECMPoQm/hr/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [45/298] Generating ECMPoQm/hsb/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [46/298] Generating ECMPoQm/it/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [47/298] Generating ECMPoQm/ko/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [48/298] Generating ECMPoQm/km/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [49/298] Generating ECMPoQm/lt/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [50/298] Generating ECMPoQm/kk/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [51/298] Generating ECMPoQm/id/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [52/298] Generating ECMPoQm/is/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [53/298] Generating ECMPoQm/lv/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [54/298] Generating ECMPoQm/lb/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [55/298] Generating ECMPoQm/ku/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [56/298] Generating ECMPoQm/nb/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [57/298] Generating ECMPoQm/mai/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [58/298] Generating ECMPoQm/kn/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [59/298] Generating ECMPoQm/mr/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [60/298] Generating ECMPoQm/ms/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [61/298] Generating ECMPoQm/nn/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [62/298] Generating ECMPoQm/mk/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [63/298] Generating ECMPoQm/ml/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [64/298] Generating ECMPoQm/nds/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [65/298] Generating ECMPoQm/oc/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [66/298] Generating ECMPoQm/or/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [67/298] Generating ECMPoQm/pl/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [68/298] Generating ECMPoQm/pt/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [69/298] Generating ECMPoQm/ne/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [70/298] Generating ECMPoQm/pt_BR/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [71/298] Generating ECMPoQm/nl/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [72/298] Generating ECMPoQm/ps/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [73/298] Generating ECMPoQm/pa/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [74/298] Generating ECMPoQm/sa/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [75/298] Generating ECMPoQm/se/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [76/298] Generating ECMPoQm/sr/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [77/298] Generating ECMPoQm/sr@ijekavian/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [78/298] Generating ECMPoQm/sr@ijekavianlatin/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [79/298] Generating ECMPoQm/sl/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [80/298] Generating ECMPoQm/sr@latin/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [81/298] Generating ECMPoQm/si/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [82/298] Generating ECMPoQm/ro/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [83/298] Generating ECMPoQm/sv/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [84/298] Generating ECMPoQm/ru/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [85/298] Generating ECMPoQm/tr/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [86/298] Generating ECMPoQm/sk/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [87/298] Generating ECMPoQm/ta/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [88/298] Generating ECMPoQm/sq/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [89/298] Generating ECMPoQm/uk/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [90/298] Generating ECMPoQm/tg/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [91/298] Generating ECMPoQm/th/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [92/298] Generating ECMPoQm/vi/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [93/298] Generating ECMPoQm/te/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [94/298] Generating ECMPoQm/ug/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [95/298] Generating ECMPoQm/zh_CN/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [96/298] Generating ECMPoQm/zh_TW/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [97/298] Generating ECMPoQm/wa/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [98/298] Generating ECMPoQm/tt/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [99/298] Generating ECMPoQm/uz@cyrillic/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [100/298] Generating ECMPoQm/uz/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [101/298] Generating ECMPoQm/xh/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [102/298] Generating ECMPoQm/zh_HK/kwindowsystem6_qt.qm Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [103/298] Automatic MOC for target KF6WindowSystem [104/298] Running AUTOMOC file extraction for target KF6WindowSystem [105/298] Running moc --collect-json for target KF6WindowSystem [106/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/KF6WindowSystem_autogen/mocs_compilation.cpp.o [107/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwindoweffects.cpp.o [108/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwindowshadow.cpp.o [109/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/pluginwrapper.cpp.o [110/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwindoweffects_dummy.cpp.o [111/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/ECMQmLoader-kwindowsystem6_qt.cpp.o [112/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwindowsystemplugininterface.cpp.o [113/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwindowsystem_debug.cpp.o [114/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwindowsystem.cpp.o [115/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwindowsystem_xcb_debug.cpp.o [116/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/platforms/xcb/kselectionwatcher.cpp.o [117/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/platforms/xcb/kxmessages.cpp.o [118/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/platforms/xcb/kxutils.cpp.o [119/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kkeyserver.cpp.o /opt/kde/src/kwindowsystem/src/kkeyserver.cpp: In function 'uint KKeyServer::getModsRequired(uint)': /opt/kde/src/kwindowsystem/src/kkeyserver.cpp:1339:36: warning: 'KeySym XKeycodeToKeysym(Display*, KeyCode, int)' is deprecated [-Wdeprecated-declarations] 1339 | if (sym == XKeycodeToKeysym(QX11Info::display(), code, 0)) { | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /opt/kde/src/kwindowsystem/src/kkeyserver.h:15, from /opt/kde/src/kwindowsystem/src/kkeyserver.cpp:10: /usr/include/X11/Xlib.h:1683:15: note: declared here 1683 | extern KeySym XKeycodeToKeysym( | ^~~~~~~~~~~~~~~~ /opt/kde/src/kwindowsystem/src/kkeyserver.cpp:1341:43: warning: 'KeySym XKeycodeToKeysym(Display*, KeyCode, int)' is deprecated [-Wdeprecated-declarations] 1341 | } else if (sym == XKeycodeToKeysym(QX11Info::display(), code, 1)) { | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/X11/Xlib.h:1683:15: note: declared here 1683 | extern KeySym XKeycodeToKeysym( | ^~~~~~~~~~~~~~~~ /opt/kde/src/kwindowsystem/src/kkeyserver.cpp:1343:43: warning: 'KeySym XKeycodeToKeysym(Display*, KeyCode, int)' is deprecated [-Wdeprecated-declarations] 1343 | } else if (sym == XKeycodeToKeysym(QX11Info::display(), code, 2)) { | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/X11/Xlib.h:1683:15: note: declared here 1683 | extern KeySym XKeycodeToKeysym( | ^~~~~~~~~~~~~~~~ /opt/kde/src/kwindowsystem/src/kkeyserver.cpp:1345:43: warning: 'KeySym XKeycodeToKeysym(Display*, KeyCode, int)' is deprecated [-Wdeprecated-declarations] 1345 | } else if (sym == XKeycodeToKeysym(QX11Info::display(), code, 3)) { | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/X11/Xlib.h:1683:15: note: declared here 1683 | extern KeySym XKeycodeToKeysym( | ^~~~~~~~~~~~~~~~ /opt/kde/src/kwindowsystem/src/kkeyserver.cpp: In function 'bool KKeyServer::xEventToQt(XEvent*, int*)': /opt/kde/src/kwindowsystem/src/kkeyserver.cpp:1587:36: warning: 'KeySym XKeycodeToKeysym(Display*, KeyCode, int)' is deprecated [-Wdeprecated-declarations] 1587 | uint sym = XKeycodeToKeysym(QX11Info::display(), keyCodeX, 0); | ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /usr/include/X11/Xlib.h:1683:15: note: declared here 1683 | extern KeySym XKeycodeToKeysym( | ^~~~~~~~~~~~~~~~ [120/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kusertimestamp.cpp.o [121/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kstartupinfo.cpp.o [122/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwindowinfo.cpp.o [123/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kxerrorhandler.cpp.o [124/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kx11extras.cpp.o [125/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/kwaylandextras.cpp.o [126/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/platforms/xcb/kselectionowner.cpp.o [127/298] Building CXX object src/CMakeFiles/KF6WindowSystem.dir/platforms/xcb/netwm.cpp.o [128/298] Linking CXX shared library bin/libKF6WindowSystem.so.6.7.0 [129/298] Creating library symlink bin/libKF6WindowSystem.so.6 bin/libKF6WindowSystem.so [130/298] Generating wayland-xdg-activation-v1-client-protocol.h [131/298] Generating wayland-xdg-activation-v1-protocol.c [132/298] Generating wayland-xdg-foreign-unstable-v2-protocol.c [133/298] Generating wayland-xdg-foreign-unstable-v2-client-protocol.h [134/298] Generating qwayland-xdg-activation-v1.h Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [135/298] Generating wayland-blur-client-protocol.h [136/298] Generating qwayland-xdg-activation-v1.cpp Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [137/298] Generating qwayland-xdg-foreign-unstable-v2.h Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [138/298] Generating qwayland-xdg-foreign-unstable-v2.cpp Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [139/298] Generating wayland-blur-protocol.c [140/298] Generating wayland-contrast-client-protocol.h [141/298] Generating qwayland-blur.h Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [142/298] Generating qwayland-blur.cpp Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [143/298] Generating wayland-contrast-protocol.c [144/298] Generating wayland-slide-client-protocol.h [145/298] Generating qwayland-contrast.cpp Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [146/298] Generating wayland-slide-protocol.c [147/298] Generating qwayland-contrast.h Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [148/298] Generating wayland-plasma-window-management-protocol.c :69: warning: since version not increasing :214: warning: since version not increasing :301: warning: since version not increasing [149/298] Generating qwayland-slide.h Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [150/298] Generating wayland-plasma-window-management-client-protocol.h :69: warning: since version not increasing :214: warning: since version not increasing :301: warning: since version not increasing [151/298] Generating qwayland-slide.cpp Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [152/298] Generating qwayland-plasma-window-management.h Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [153/298] Generating qwayland-plasma-window-management.cpp Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [154/298] Generating wayland-shadow-protocol.c [155/298] Generating qwayland-shadow.cpp Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [156/298] Generating wayland-shadow-client-protocol.h [157/298] Generating qwayland-shadow.h Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [158/298] Generating qwayland-wayland.cpp Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [159/298] Generating wayland-wayland-protocol.c [160/298] Generating qwayland-wayland.h Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [161/298] Generating wayland-wayland-client-protocol.h [162/298] Automatic MOC for target kstartupinfo_unittest [163/298] Automatic MOC for target KF6WindowSystemX11Plugin [164/298] Automatic MOC for target kwindowsystemplatformwaylandtest [165/298] Building CXX object autotests/CMakeFiles/kwindowsystemplatformwaylandtest.dir/kwindowsystemplatformwaylandtest_autogen/mocs_compilation.cpp.o [166/298] Building CXX object autotests/CMakeFiles/kwindowsystemplatformwaylandtest.dir/kwindowsystem_platform_wayland_test.cpp.o [167/298] Automatic MOC for target kxmessages_unittest [168/298] Automatic MOC for target kmanagerselectiontest [169/298] Automatic MOC for target kkeyserver_x11_unittest [170/298] Linking CXX executable bin/kwindowsystemplatformwaylandtest [171/298] Automatic MOC for target kwindoweffectstest [172/298] Automatic MOC for target KWindowSystem [173/298] Running AUTOMOC file extraction for target KWindowSystem [174/298] Running moc --collect-json for target KWindowSystem [175/298] Automatic QML type registration for target KWindowSystem Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [176/298] Running rcc for resource qmake_org_kde_kwindowsystem Detected locale "C" with character encoding "ANSI_X3.4-1968", which is not UTF-8. Qt depends on a UTF-8 locale, and has switched to "C.UTF-8" instead. If this causes problems, reconfigure your locale. See the locale(1) manual for more information. [177/298] Automatic MOC for target kwindowsystemx11test [178/298] Automatic MOC for target fixx11h_test [179/298] Automatic MOC for target kwindowinfox11test [180/298] Automatic MOC for target fixx11h_test2 [181/298] Automatic MOC for target dontcrashmapviewport [182/298] Automatic MOC for target netwininfotestclient [183/298] Automatic MOC for target kwindowsystem_platform_wayland_helper [184/298] Automatic MOC for target kwindowsystem_threadtest [185/298] Automatic MOC for target netrootinfotestwm [186/298] Automatic MOC for target blurbehindtest [187/298] Automatic MOC for target backgroundcontrasttest [188/298] Building CXX object src/platforms/xcb/CMakeFiles/KF6WindowSystemX11Plugin.dir/KF6WindowSystemX11Plugin_autogen/mocs_compilation.cpp.o [189/298] Building CXX object src/platforms/xcb/CMakeFiles/KF6WindowSystemX11Plugin.dir/kwindoweffects.cpp.o [190/298] Automatic MOC for target icontest [191/298] Automatic MOC for target createpixmapfromhandletest [192/298] Automatic MOC for target setmainwindowtest [193/298] Automatic MOC for target kwaylandextrastest [194/298] Building CXX object src/platforms/xcb/CMakeFiles/KF6WindowSystemX11Plugin.dir/kwindowsystem.cpp.o [195/298] Building CXX object src/platforms/xcb/CMakeFiles/KF6WindowSystemX11Plugin.dir/kwindowshadow.cpp.o [196/298] Building CXX object src/platforms/xcb/CMakeFiles/KF6WindowSystemX11Plugin.dir/kxutils.cpp.o [197/298] Building CXX object src/qml/CMakeFiles/KWindowSystem.dir/KWindowSystem_autogen/mocs_compilation.cpp.o [198/298] Building CXX object src/platforms/xcb/CMakeFiles/KF6WindowSystemX11Plugin.dir/plugin.cpp.o [199/298] Building CXX object src/qml/CMakeFiles/KWindowSystem.dir/KWindowSystem_org_kde_kwindowsystemPlugin.cpp.o [200/298] Building CXX object src/qml/CMakeFiles/KWindowSystem.dir/kwindowsystem_qmltyperegistrations.cpp.o [201/298] Building CXX object autotests/CMakeFiles/kmanagerselectiontest.dir/kmanagerselectiontest_autogen/mocs_compilation.cpp.o [202/298] Building CXX object autotests/CMakeFiles/kstartupinfo_unittest.dir/kstartupinfo_unittest_autogen/mocs_compilation.cpp.o [203/298] Building CXX object autotests/CMakeFiles/kxmessages_unittest.dir/kxmessages_unittest_autogen/mocs_compilation.cpp.o [204/298] Building CXX object autotests/CMakeFiles/kmanagerselectiontest.dir/kmanagerselectiontest.cpp.o [205/298] Building CXX object autotests/CMakeFiles/kstartupinfo_unittest.dir/kstartupinfo_unittest.cpp.o [206/298] Building CXX object autotests/CMakeFiles/kkeyserver_x11_unittest.dir/kkeyserver_x11_unittest_autogen/mocs_compilation.cpp.o [207/298] Building CXX object autotests/CMakeFiles/kxmessages_unittest.dir/kxmessages_unittest.cpp.o [208/298] Building CXX object autotests/CMakeFiles/kwindoweffectstest.dir/kwindoweffectstest_autogen/mocs_compilation.cpp.o [209/298] Building CXX object autotests/CMakeFiles/kwindowinfox11test.dir/kwindowinfox11test_autogen/mocs_compilation.cpp.o [210/298] Building CXX object autotests/CMakeFiles/kkeyserver_x11_unittest.dir/kkeyserver_x11_unittest.cpp.o [211/298] Building CXX object autotests/CMakeFiles/kwindoweffectstest.dir/kwindoweffectstest.cpp.o [212/298] Building CXX object autotests/CMakeFiles/kwindowsystemx11test.dir/kwindowsystemx11test_autogen/mocs_compilation.cpp.o [213/298] Building CXX object autotests/CMakeFiles/kwindowinfox11test.dir/kwindowinfox11test.cpp.o [214/298] Building CXX object src/qml/CMakeFiles/KWindowSystem.dir/.qt/rcc/qrc_qmake_org_kde_kwindowsystem.cpp.o [215/298] Building CXX object autotests/CMakeFiles/kwindowsystem_threadtest.dir/kwindowsystem_threadtest_autogen/mocs_compilation.cpp.o [216/298] Building CXX object autotests/CMakeFiles/netrootinfotestwm.dir/netrootinfotestwm_autogen/mocs_compilation.cpp.o [217/298] Building CXX object autotests/CMakeFiles/kwindowsystemx11test.dir/kwindowsystemx11test.cpp.o [218/298] Building CXX object autotests/CMakeFiles/netwininfotestclient.dir/netwininfotestclient_autogen/mocs_compilation.cpp.o [219/298] Building CXX object autotests/CMakeFiles/netrootinfotestwm.dir/netrootinfotestwm.cpp.o [220/298] Building CXX object autotests/CMakeFiles/fixx11h_test.dir/fixx11h_test_autogen/mocs_compilation.cpp.o [221/298] Building CXX object autotests/CMakeFiles/fixx11h_test.dir/fixx11h_test.cpp.o [222/298] Building CXX object autotests/CMakeFiles/kwindowsystem_threadtest.dir/kwindowsystem_threadtest.cpp.o [223/298] Building CXX object autotests/CMakeFiles/fixx11h_test2.dir/fixx11h_test2_autogen/mocs_compilation.cpp.o [224/298] Building CXX object autotests/CMakeFiles/dontcrashmapviewport.dir/dontcrashmapviewport_autogen/mocs_compilation.cpp.o [225/298] Building CXX object autotests/CMakeFiles/fixx11h_test2.dir/fixx11h_test2.cpp.o [226/298] Building CXX object autotests/helper/CMakeFiles/kwindowsystem_platform_wayland_helper.dir/kwindowsystem_platform_wayland_helper_autogen/mocs_compilation.cpp.o [227/298] Building CXX object autotests/CMakeFiles/dontcrashmapviewport.dir/dontcrashmapviewport.cpp.o [228/298] Building CXX object tests/CMakeFiles/blurbehindtest.dir/blurbehindtest_autogen/mocs_compilation.cpp.o [229/298] Building CXX object autotests/CMakeFiles/netwininfotestclient.dir/netwininfotestclient.cpp.o [230/298] Building CXX object tests/CMakeFiles/backgroundcontrasttest.dir/backgroundcontrasttest_autogen/mocs_compilation.cpp.o [231/298] Building CXX object tests/CMakeFiles/icontest.dir/icontest_autogen/mocs_compilation.cpp.o [232/298] Building CXX object autotests/helper/CMakeFiles/kwindowsystem_platform_wayland_helper.dir/wayland_platform.cpp.o [233/298] Building CXX object tests/CMakeFiles/backgroundcontrasttest.dir/backgroundcontrasttest.cpp.o [234/298] Building CXX object tests/CMakeFiles/createpixmapfromhandletest.dir/createpixmapfromhandletest_autogen/mocs_compilation.cpp.o [235/298] Building CXX object tests/CMakeFiles/blurbehindtest.dir/blurbehindtest.cpp.o [236/298] Building CXX object tests/CMakeFiles/setmainwindowtest.dir/setmainwindowtest_autogen/mocs_compilation.cpp.o [237/298] Building CXX object tests/CMakeFiles/createpixmapfromhandletest.dir/createpixmapfromhandletest.cpp.o [238/298] Building CXX object tests/CMakeFiles/icontest.dir/icontest.cpp.o [239/298] Building CXX object tests/CMakeFiles/kwaylandextrastest.dir/kwaylandextrastest_autogen/mocs_compilation.cpp.o [240/298] Building CXX object tests/CMakeFiles/setmainwindowtest.dir/setmainwindowtest.cpp.o [241/298] Building CXX object tests/CMakeFiles/kwaylandextrastest.dir/kwaylandextrastest.cpp.o [242/298] Automatic MOC for target netwininfotestwm [243/298] Building CXX object autotests/CMakeFiles/netwininfotestwm.dir/netwininfotestwm_autogen/mocs_compilation.cpp.o [244/298] Building CXX object autotests/CMakeFiles/netwininfotestwm.dir/netwininfotestwm.cpp.o [245/298] Automatic MOC for target compositingenabled_test [246/298] Building CXX object autotests/CMakeFiles/compositingenabled_test.dir/compositingenabled_test_autogen/mocs_compilation.cpp.o [247/298] Building CXX object autotests/CMakeFiles/compositingenabled_test.dir/compositingenabled_test.cpp.o [248/298] Linking CXX shared module bin/kf6/kwindowsystem/KF6WindowSystemX11Plugin.so [249/298] Linking CXX shared module bin/org/kde/kwindowsystem/libKWindowSystem.so [250/298] Linking CXX executable bin/kkeyserver_x11_unittest [251/298] Linking CXX executable bin/kwindoweffectstest [252/298] Linking CXX executable bin/kwindowinfox11test [253/298] Linking CXX executable bin/kmanagerselectiontest [254/298] Linking CXX executable bin/kstartupinfo_unittest [255/298] Linking CXX executable bin/kxmessages_unittest [256/298] Linking CXX executable bin/kwindowsystem_threadtest [257/298] Linking CXX executable bin/netwininfotestwm [258/298] Linking CXX executable bin/compositingenabled_test [259/298] Linking CXX executable bin/kwindowsystemx11test [260/298] Linking CXX executable bin/fixx11h_test2 [261/298] Linking CXX executable bin/fixx11h_test [262/298] Automatic MOC for target KF6WindowSystemKWaylandPlugin [263/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/KF6WindowSystemKWaylandPlugin_autogen/mocs_compilation.cpp.o [264/298] Linking CXX executable bin/dontcrashmapviewport [265/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/qwayland-xdg-activation-v1.cpp.o [266/298] Linking CXX executable bin/kwindowsystem_platform_wayland_helper [267/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/qwayland-xdg-foreign-unstable-v2.cpp.o [268/298] Linking CXX executable bin/netrootinfotestwm [269/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/qwayland-blur.cpp.o [270/298] Linking CXX executable bin/netwininfotestclient [271/298] Building C object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/wayland-xdg-activation-v1-protocol.c.o [272/298] Building C object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/wayland-xdg-foreign-unstable-v2-protocol.c.o [273/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/qwayland-contrast.cpp.o [274/298] Building C object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/wayland-blur-protocol.c.o [275/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/qwayland-slide.cpp.o [276/298] Linking CXX executable bin/backgroundcontrasttest [277/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/qwayland-plasma-window-management.cpp.o [278/298] Building C object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/wayland-contrast-protocol.c.o [279/298] Linking CXX executable bin/blurbehindtest [280/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/qwayland-shadow.cpp.o [281/298] Building C object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/wayland-slide-protocol.c.o [282/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/qwayland-wayland.cpp.o [283/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/plugin.cpp.o [284/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/shm.cpp.o [285/298] Building C object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/wayland-shadow-protocol.c.o [286/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/windoweffects.cpp.o [287/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/windowshadow.cpp.o [288/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/waylandxdgactivationv1.cpp.o [289/298] Building C object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/wayland-plasma-window-management-protocol.c.o [290/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/logging.cpp.o [291/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/waylandxdgforeignv2.cpp.o [292/298] Building CXX object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/windowsystem.cpp.o [293/298] Building C object src/platforms/wayland/CMakeFiles/KF6WindowSystemKWaylandPlugin.dir/wayland-wayland-protocol.c.o [294/298] Linking CXX executable bin/icontest [295/298] Linking CXX executable bin/kwaylandextrastest [296/298] Linking CXX executable bin/setmainwindowtest [297/298] Linking CXX executable bin/createpixmapfromhandletest [298/298] Linking CXX shared module bin/KF6WindowSystemKWaylandPlugin.so