# translation of dolphin.po to Chinese Traditional
# translation of dolphin.po to
# Copyright (C) YEAR This_file_is_part_of_KDE
# This file is distributed under the same license as the PACKAGE package.
#
# SPDX-FileCopyrightText: 2023, 2024 Kisaragi Hiu <mail@kisaragi-hiu.com>
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2007, 2008, 2009, 2010.
# Frank Weng (a.k.a. Franklin) <franklin@mail.everfocus.com.tw>, 2007.
# Franklin Weng <franklin at goodhorse dot idv dot tw>, 2007, 2008.
# Franklin Weng <franklin at goodhorse dot idv dot tw>, 2007, 2008, 2010, 2011.
# Goodhorse <franklin@goodhorse.idv.tw>, 2008.
# Franklin Weng <franklin at goodhorse dot idv dot tw>, 2011, 2012, 2013, 2014, 2015, 2017.
# Tsung-en Hsiao <joshua841025@gmail.com>, 2015.
# Jeff Huang <s8321414@gmail.com>, 2016, 2017, 2018.
# pan93412 <pan93412@gmail.com>, 2018, 2019, 2020.
# Emoji <contact-forward@thost3.de>, 2022.
# Kisaragi Hiu <mail@kisaragi-hiu.com>, 2023.
msgid ""
msgstr ""
"Project-Id-Version: dolphin\n"
"Report-Msgid-Bugs-To: https://bugs.kde.org\n"
"POT-Creation-Date: 2024-10-09 00:42+0000\n"
"PO-Revision-Date: 2024-08-25 02:31+0900\n"
"Last-Translator: Kisaragi Hiu <mail@kisaragi-hiu.com>\n"
"Language-Team: Traditional Chinese <zh-l10n@lists.slat.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Lokalize 24.04.70\n"

#, kde-format
msgctxt "NAME OF TRANSLATORS"
msgid "Your names"
msgstr "Franklin Weng, Jeff Huang, pan93412, Emoji, Kisaragi Hiu"

#, kde-format
msgctxt "EMAIL OF TRANSLATORS"
msgid "Your emails"
msgstr ""
"franklin@goodhorse.idv.tw, s8321414@gmail.com, pan93412@gmail.com, contact-"
"forward@thost3.de, mail@kisaragi-hiu.com"

#: admin/bar.cpp:45
#, kde-format
msgctxt "@info label above the view explaining the state"
msgid "Acting as an Administrator — Be careful!"
msgstr "管理員操作模式 — 請小心！"

#: admin/bar.cpp:46
#, kde-format
msgctxt "@info label above the view explaining the state, keep short"
msgid "Acting as Admin"
msgstr "管理員操作模式"

#: admin/bar.cpp:55
#, kde-format
msgctxt "@action:button Finish/Stop/Done acting as an admin"
msgid "Finish"
msgstr "完成"

#: admin/bar.cpp:57
#, kde-format
msgctxt "@info:tooltip"
msgid "Finish acting as an administrator"
msgstr "離開管理員操作模式"

#: admin/bar.cpp:140
#, kde-format
msgctxt "@action:button shown after acting as admin ended"
msgid "Act as Administrator Again"
msgstr "再次進入管理員操作模式"

#: admin/bar.cpp:148
#, kde-format
msgctxt "@info"
msgid "Administrator authorization has expired."
msgstr "管理員權限驗證已逾時。"

#: admin/workerintegration.cpp:33
#, kde-format
msgctxt "@action:inmenu"
msgid "Act as Administrator"
msgstr "管理員操作模式"

#: admin/workerintegration.cpp:54
#, kde-kuit-format
msgctxt "@info:shell"
msgid ""
"<application>Dolphin</application> requires <application>%1</application> to "
"manage system-controlled files, but it is not installed.<nl/>Press %2 to "
"install <application>%1</application> or %3 to cancel."
msgstr ""
"<application>Dolphin</application> 需要 <application>%1</application> 來管理"
"系統控制的檔案，而它尚未安裝。<nl/>點擊 %2 來安裝 <application>%1</"
"application> 或是 %3 來取消。"

#: admin/workerintegration.cpp:76
#, kde-format
msgctxt "tag-format-pattern <numberedlist> rich"
msgid "<ol>%1</ol>"
msgstr "<ol>%1</ol>"

#: admin/workerintegration.cpp:77
#, kde-format
msgctxt "tag-format-pattern <numbereditem> rich"
msgid "<li>%1</li>"
msgstr "<li>%1</li>"

#: admin/workerintegration.cpp:82
#, kde-kuit-format
msgctxt "@info"
msgid ""
"<para>Make use of your administrator rights in Dolphin:"
"<numberedlist><numbereditem>Navigate to the file or folder you want to "
"change.</numbereditem><numbereditem>Activate the \"%1\" action either under "
"<interface>Open Menu|More|View</interface> or <interface>Menu Bar|View</"
"interface>.<nl/>Default shortcut: <shortcut>%2</shortcut></"
"numbereditem><numbereditem>After authorization you can manage files as an "
"administrator.</numbereditem></numberedlist></para>"
msgstr ""
"<para>在 Dolphin 中利用您的管理員權限：<numberedlist><numbereditem>瀏覽到您希"
"望變更的檔案或資料夾。</numbereditem><numbereditem>觸發「%1」動作："
"<interface>開啟選單|更多|檢視</interface> 或是 <interface>選單列|檢視</"
"interface>。<nl/>預設快捷鍵：<shortcut>%2</shortcut></"
"numbereditem><numbereditem>驗證後您即可利用系統管理員權限管理檔案。</"
"numbereditem></numberedlist></para>"

#: admin/workerintegration.cpp:89
#, kde-format
msgctxt "@title:window"
msgid "How to Administrate"
msgstr "如何利用管理員權限"

#: admin/workerintegration.cpp:98
#, kde-kuit-format
msgctxt "@info"
msgid ""
"<para>You are about to use administrator privileges. While acting as an "
"administrator you can change or replace any file or folder on this system. "
"This includes items which are critical for this system to function.</"
"para><para>You are able to <emphasis>delete every users' data</emphasis> on "
"this computer and to <emphasis>break this installation beyond repair.</"
"emphasis> Adding just one letter in a folder or file name or its contents "
"can render a system <emphasis>unbootable.</emphasis></para><para>There is "
"probably not going to be another warning even if you are about to break this "
"system.</para><para>You might want to <emphasis>backup files and folders</"
"emphasis> before proceeding.</para>"
msgstr ""
"<para>您即將使用管理員權限進行操作。在管理員操作模式下您可以變更或取代此系統"
"上的任何檔案或資料夾。這包含系統正常運作所必要的項目。</para><para>您會有權在"
"此電腦上<emphasis>刪除所有使用者的資料</emphasis>或<emphasis>將此安裝損毀到無"
"法復原的地步</emphasis>。只要改到錯的檔案或資料夾，只要一個字母就能讓系統"
"<emphasis>無法開機</emphasis>。</para><para>在您即將弄壞系統之前基本上不會再"
"有像這個訊息一樣的警告。</para><para>您可能會希望在繼續之前先<emphasis>備份檔"
"案與資料夾</emphasis>。</para>"

#: admin/workerintegration.cpp:161
#, kde-format
msgctxt "@title:window"
msgid "Risks of Acting as an Administrator"
msgstr "管理員操作模式的風險"

#: admin/workerintegration.cpp:163
#, kde-format
msgctxt "@action:button"
msgid "I Understand and Accept These Risks"
msgstr "我瞭解並接受這些風險"

#: admin/workerintegration.cpp:165
#, kde-format
msgctxt "@option:check"
msgid "Do not warn me about these risks again"
msgstr "不要再警告我這些風險"

#: dolphincontextmenu.cpp:124
#, kde-format
msgctxt "@action:inmenu"
msgid "Empty Trash"
msgstr "清空垃圾桶"

#: dolphincontextmenu.cpp:138
#, kde-format
msgctxt "@action:inmenu"
msgid "Restore"
msgstr "還原"

#: dolphincontextmenu.cpp:184 dolphinmainwindow.cpp:1683
#, kde-format
msgctxt "@title:menu Create new folder, file, link, etc."
msgid "Create New"
msgstr "建立新的"

#: dolphincontextmenu.cpp:193
#, kde-format
msgctxt "@action:inmenu"
msgid "Open Path"
msgstr "開啟路徑"

#: dolphincontextmenu.cpp:201
#, kde-format
msgctxt "@action:inmenu"
msgid "Open Path in New Tab"
msgstr "在新分頁開啟路徑"

#: dolphincontextmenu.cpp:205
#, kde-format
msgctxt "@action:inmenu"
msgid "Open Path in New Window"
msgstr "在新視窗開啟路徑"

#: dolphincontextmenu.cpp:455
#, kde-format
msgctxt ""
"@action:inmenu Shortcut, middle click to trigger menu item, keep short"
msgid "Middle Click"
msgstr "滑鼠中鍵"

#: dolphinmainwindow.cpp:332
#, kde-format
msgctxt "@info:status"
msgid "Successfully copied."
msgstr "已成功複製。"

#: dolphinmainwindow.cpp:335
#, kde-format
msgctxt "@info:status"
msgid "Successfully moved."
msgstr "已成功移動。"

#: dolphinmainwindow.cpp:338
#, kde-format
msgctxt "@info:status"
msgid "Successfully linked."
msgstr "已成功連結。"

#: dolphinmainwindow.cpp:341
#, kde-format
msgctxt "@info:status"
msgid "Successfully moved to trash."
msgstr "已成功移到垃圾桶。"

#: dolphinmainwindow.cpp:344
#, kde-format
msgctxt "@info:status"
msgid "Successfully renamed."
msgstr "已成功重新命名。"

#: dolphinmainwindow.cpp:348
#, kde-format
msgctxt "@info:status"
msgid "Created folder."
msgstr "資料夾已建立。"

#: dolphinmainwindow.cpp:423
#, kde-format
msgctxt "@info"
msgid "Go back"
msgstr "返回"

#: dolphinmainwindow.cpp:424
#, kde-format
msgctxt "@info:whatsthis go back"
msgid "Return to the previously viewed folder."
msgstr "回到上次檢視的資料夾。"

#: dolphinmainwindow.cpp:430
#, kde-format
msgctxt "@info"
msgid "Go forward"
msgstr "向前"

#: dolphinmainwindow.cpp:431
#, kde-kuit-format
msgctxt "@info:whatsthis go forward"
msgid "This undoes a <interface>Go|Back</interface> action."
msgstr "這會復原 <interface>跳至|往回</interface> 動作。"

#: dolphinmainwindow.cpp:621 dolphinmainwindow.cpp:667
#, kde-format
msgctxt "@title:window"
msgid "Confirmation"
msgstr "確認"

#: dolphinmainwindow.cpp:625
#, kde-format
msgctxt "@action:button 'Quit Dolphin' button"
msgid "&Quit %1"
msgstr "關閉 %1(&Q)"

#: dolphinmainwindow.cpp:627
#, kde-format
msgid "C&lose Current Tab"
msgstr "關閉目前分頁(&L)"

#: dolphinmainwindow.cpp:636
#, kde-format
msgid ""
"You have multiple tabs open in this window, are you sure you want to quit?"
msgstr "您在此視窗中開啟了多個分頁。您確定要離開嗎？"

#: dolphinmainwindow.cpp:638 dolphinmainwindow.cpp:688
#, kde-format
msgid "Do not ask again"
msgstr "不要再詢問"

#: dolphinmainwindow.cpp:676
#, kde-format
msgid "Show &Terminal Panel"
msgstr "顯示終端機面板(&T)"

#: dolphinmainwindow.cpp:686
#, kde-format
msgid ""
"The program '%1' is still running in the Terminal panel. Are you sure you "
"want to quit?"
msgstr "程式「%1」仍然在「終端機」面板執行。確定退出？"

#: dolphinmainwindow.cpp:884
#, kde-format
msgctxt "@info"
msgid "Cannot paste: The clipboard is empty."
msgstr "無法貼上：剪貼簿是空的。"

#: dolphinmainwindow.cpp:885
#, kde-format
msgctxt "@info"
msgid "Cannot paste: You do not have permission to write into this folder."
msgstr "無法貼上：您沒有寫入此資料夾的權限。"

#: dolphinmainwindow.cpp:1274
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Open %1"
msgstr "開啟 %1"

#: dolphinmainwindow.cpp:1283 dolphinmainwindow.cpp:2039
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Open Preferred Search Tool"
msgstr "開啟偏好的搜尋工具"

#: dolphinmainwindow.cpp:1323
#, kde-format
msgid "Are you sure you want to open 1 terminal window?"
msgid_plural "Are you sure you want to open %1 terminal windows?"
msgstr[0] "您確定要開啟 %1 個終端機視窗嗎？"

#: dolphinmainwindow.cpp:1328
#, kde-format
msgctxt "@action:button"
msgid "Open %1 Terminal"
msgid_plural "Open %1 Terminals"
msgstr[0] "開啟 %1 個終端機"

#: dolphinmainwindow.cpp:1429
#, kde-format
msgctxt "@info"
msgid ""
"Cannot create new folder: You do not have permission to create items in this "
"folder."
msgstr "無法建立新資料夾：您沒有在此資料夾建立新項目的權限。"

#: dolphinmainwindow.cpp:1528
#, kde-format
msgctxt "@action:inmenu menu for configure actions"
msgid "Configure"
msgstr "設定"

#: dolphinmainwindow.cpp:1689
#, kde-format
msgctxt "@action:inmenu File"
msgid "New &Window"
msgstr "新視窗(&W)"

#: dolphinmainwindow.cpp:1690
#, kde-format
msgctxt "@info"
msgid "Open a new Dolphin window"
msgstr "開啟新 Dolphin 視窗"

#: dolphinmainwindow.cpp:1692
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens a new window just like this one with the current location.<nl/"
">You can drag and drop items between windows."
msgstr "這會開啟一個使用目前位置的新視窗。<nl/>您可以在視窗之間拖放項目。"

#: dolphinmainwindow.cpp:1699
#, kde-format
msgctxt "@action:inmenu File"
msgid "New Tab"
msgstr "新增分頁"

#: dolphinmainwindow.cpp:1701
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens a new <emphasis>Tab</emphasis> with the current location.<nl/"
">Tabs allow you to quickly switch between multiple locations and views "
"within this window. You can drag and drop items between tabs."
msgstr ""
"這會開啟一個使用目前位置的新<emphasis>分頁</emphasis>。<nl/>分頁讓您在此視窗"
"內快速切換不同的位置與檢視。您可以在分頁之間拖放項目。"

#: dolphinmainwindow.cpp:1710
#, kde-format
msgctxt "@action:inmenu Add current folder to places"
msgid "Add to Places"
msgstr "新增到書籤"

#: dolphinmainwindow.cpp:1712
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This adds the selected folder to the Places panel."
msgstr "這會將被選取的資料夾加入書籤。"

#: dolphinmainwindow.cpp:1717
#, kde-format
msgctxt "@action:inmenu File"
msgid "Close Tab"
msgstr "關閉分頁"

#: dolphinmainwindow.cpp:1718
#, kde-format
msgctxt "@info"
msgid "Close Tab"
msgstr "關閉分頁"

#: dolphinmainwindow.cpp:1720
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"This closes the currently viewed tab. If no more tabs are left, this closes "
"the whole window instead."
msgstr "這將會關閉目前分頁。如果在同一視窗裡沒有其他分頁，這將會關閉整個視窗。"

#: dolphinmainwindow.cpp:1725
#, kde-format
msgctxt "@info:whatsthis quit"
msgid "This closes this window."
msgstr "這會關閉整個視窗。"

#: dolphinmainwindow.cpp:1733
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para><emphasis>Cut, Copy</emphasis> and <emphasis>Paste</emphasis> work "
"between many applications and are among the most used commands. That's why "
"their <emphasis>keyboard shortcuts</emphasis> are prominently placed right "
"next to each other on the keyboard: <shortcut>Ctrl+X</shortcut>, "
"<shortcut>Ctrl+C</shortcut> and <shortcut>Ctrl+V</shortcut>.</para>"
msgstr ""
"<para><emphasis>剪下、複製</emphasis>與<emphasis>貼上</emphasis>在很多應用程"
"式之間都能運作，是最常用的幾個動作。這也是為什麼它們的<emphasis>鍵盤快捷鍵</"
"emphasis>很明顯的放在鍵盤上彼此的旁邊：<shortcut>Ctrl+X</shortcut>、"
"<shortcut>Ctrl+C</shortcut> 和 <shortcut>Ctrl+V</shortcut>。</para>"

#: dolphinmainwindow.cpp:1740
#, kde-format
msgctxt "@action"
msgid "Cut…"
msgstr "剪下…"

#: dolphinmainwindow.cpp:1742
#, kde-kuit-format
msgctxt "@info:whatsthis cut"
msgid ""
"This copies the items in your current selection to the <emphasis>clipboard</"
"emphasis>.<nl/>Use the <emphasis>Paste</emphasis> action afterwards to copy "
"them from the clipboard to a new location. The items will be removed from "
"their initial location."
msgstr ""
"這會複製您目前選取範圍中的項目到 <emphasis>剪貼簿</emphasis>。<nl/>之後使用 "
"<emphasis>貼上</emphasis> 動作來將它們複製到新的位置。項目將會從原本的位置移"
"除。"

#: dolphinmainwindow.cpp:1749
#, kde-format
msgctxt "@action"
msgid "Copy…"
msgstr "複製…"

#: dolphinmainwindow.cpp:1751
#, kde-kuit-format
msgctxt "@info:whatsthis copy"
msgid ""
"This copies the items in your current selection to the <emphasis>clipboard</"
"emphasis>.<nl/>Use the <emphasis>Paste</emphasis> action afterwards to copy "
"them from the clipboard to a new location."
msgstr ""
"這會複製您目前選取範圍中的項目到 <emphasis>剪貼簿</emphasis>。<nl/>之後使用 "
"<emphasis>貼上</emphasis> 動作來將它們複製到新的位置。"

#: dolphinmainwindow.cpp:1760
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Paste"
msgstr "貼上"

#: dolphinmainwindow.cpp:1762
#, kde-kuit-format
msgctxt "@info:whatsthis paste"
msgid ""
"This copies the items from your <emphasis>clipboard</emphasis> to the "
"currently viewed folder.<nl/>If the items were added to the clipboard by the "
"<emphasis>Cut</emphasis> action they are removed from their old location."
msgstr ""
"這會複製您的<emphasis>剪貼簿</emphasis>中的項目到目前檢視的資料夾。<nl/>如果"
"剪貼簿中的項目是被<emphasis>剪下</emphasis>動作加入的，複製後它們將會被從原本"
"的位置移除。"

#: dolphinmainwindow.cpp:1769
#, kde-format
msgctxt "@action:inmenu"
msgid "Copy to Other View"
msgstr "複製到另一個檢視"

#: dolphinmainwindow.cpp:1770
#, kde-format
msgctxt "@action:inmenu"
msgid "Copy to Other View…"
msgstr "複製到另一個檢視…"

#: dolphinmainwindow.cpp:1772
#, kde-kuit-format
msgctxt "@info:whatsthis Copy"
msgid ""
"This copies the selected items from the view in focus to the other view. "
"(Only available while in Split View mode.)"
msgstr ""
"這會從聚焦的檢視複製選取項目到另一個分割檢視。（只能在分割檢視模式時使用。）"

#: dolphinmainwindow.cpp:1776
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Copy to Other View"
msgstr "複製到另一個檢視"

#: dolphinmainwindow.cpp:1781
#, kde-format
msgctxt "@action:inmenu"
msgid "Move to Other View"
msgstr "移動到另一個檢視"

#: dolphinmainwindow.cpp:1782
#, kde-format
msgctxt "@action:inmenu"
msgid "Move to Other View…"
msgstr "移動到另一個檢視…"

#: dolphinmainwindow.cpp:1784
#, kde-kuit-format
msgctxt "@info:whatsthis Move"
msgid ""
"This moves the selected items from the view in focus to the other view. "
"(Only available while in Split View mode.)"
msgstr ""
"這會從聚焦的檢視移動選取項目到另一個分割檢視。（只能在分割檢視模式時使用。）"

#: dolphinmainwindow.cpp:1788
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Move to Other View"
msgstr "移動到另一個檢視"

#: dolphinmainwindow.cpp:1793
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Filter…"
msgstr "過濾…"

#: dolphinmainwindow.cpp:1794
#, kde-format
msgctxt "@info:tooltip"
msgid "Show Filter Bar"
msgstr "顯示過濾器列"

#: dolphinmainwindow.cpp:1796
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens the <emphasis>Filter Bar</emphasis> at the bottom of the window."
"<nl/> There you can enter text to filter the files and folders currently "
"displayed. Only those that contain the text in their name will be kept in "
"view."
msgstr ""
"這會在視窗下方開啟<emphasis>過濾器列</emphasis>。<nl/>在此您可以輸入文字來過"
"濾目前顯示的檔案和資料夾。只有名稱包含所輸入文字的項目會繼續顯示。"

#: dolphinmainwindow.cpp:1808
#, kde-format
msgctxt "@action:inmenu"
msgid "Toggle Filter Bar"
msgstr "切換過濾器列"

#: dolphinmainwindow.cpp:1809
#, kde-format
msgctxt "@action:intoolbar"
msgid "Filter"
msgstr "過濾器"

#: dolphinmainwindow.cpp:1817 search/dolphinsearchbox.cpp:350
#, kde-format
msgid "Search…"
msgstr "搜尋…"

#: dolphinmainwindow.cpp:1818
#, kde-format
msgctxt "@info:tooltip"
msgid "Search for files and folders"
msgstr "搜尋檔案及資料夾"

#: dolphinmainwindow.cpp:1820
#, kde-kuit-format
msgctxt "@info:whatsthis find"
msgid ""
"<para>This helps you find files and folders by opening a <emphasis>search "
"bar</emphasis>. There you can enter search terms and specify settings to "
"find the items you are looking for.</para><para>Use this help again on the "
"search bar so we can have a look at it while the settings are explained.</"
"para>"
msgstr ""
"<para>這會開啟一個<emphasis>搜尋列</emphasis>來幫助您尋找檔案和資料夾。在其中"
"您可以輸入搜尋字串或指定設定來找到您在找的項目。</para><para>在搜尋列上再次使"
"用這個說明的話可以邊看著它邊說明它的設定。</para>"

#: dolphinmainwindow.cpp:1831
#, kde-format
msgctxt "@action:inmenu"
msgid "Toggle Search Bar"
msgstr "切換搜尋列"

#: dolphinmainwindow.cpp:1832
#, kde-format
msgctxt "@action:intoolbar"
msgid "Search"
msgstr "搜尋"

#. i18n: This action toggles a selection mode.
#: dolphinmainwindow.cpp:1840
#, kde-format
msgctxt "@action:inmenu"
msgid "Select Files and Folders"
msgstr "選取檔案及資料夾"

#. i18n: Opens a selection mode for selecting files/folders.
#. The text is kept so unspecific because it will be shown on the toolbar where space is at a premium.
#: dolphinmainwindow.cpp:1843
#, kde-format
msgctxt "@action:intoolbar"
msgid "Select"
msgstr "選取"

#: dolphinmainwindow.cpp:1846
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This application only knows which files or folders should be acted on "
"if they are <emphasis>selected</emphasis> first. Press this to toggle a "
"<emphasis>Selection Mode</emphasis> which makes selecting and deselecting as "
"easy as pressing an item once.</para><para>While in this mode, a quick "
"access bar at the bottom shows available actions for the currently selected "
"items.</para>"
msgstr ""
"<para>這個應用程式需要先<emphasis>選取</emphasis>檔案或資料夾才知道要對哪些項"
"目套用動作。按此來切換 <emphasis>選取模式</emphasis> 功能，只需要按一次項目就"
"可以選取或取消選取它。</para><para>在此模式中，下方會有一個快速功能列，顯示目"
"前選取的項目可用的動作。</para>"

#: dolphinmainwindow.cpp:1869
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid "This selects all files and folders in the current location."
msgstr "這會選擇所有在目前路徑的檔案以及資料夾。"

#: dolphinmainwindow.cpp:1873 dolphinpart.cpp:167
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Invert Selection"
msgstr "反轉選取"

#: dolphinmainwindow.cpp:1875
#, kde-kuit-format
msgctxt "@info:whatsthis invert"
msgid ""
"This selects all items that you have currently <emphasis>not</emphasis> "
"selected instead."
msgstr "這會選擇所有您目前<emphasis>未</emphasis>選取的項目。"

#: dolphinmainwindow.cpp:1895
#, kde-kuit-format
msgctxt "@info:whatsthis split"
msgid ""
"<para>This presents a second view side-by-side with the current view, so you "
"can see the contents of two folders at once and easily move items between "
"them.</para><para>The view that is not \"in focus\" will be dimmed. </"
"para>Click this button again to close one of the views."
msgstr ""
"<para>這會在目前檢視旁邊提供第二個檢視，讓您能夠同時開啟兩個資料夾，並輕易地"
"在它們之間移動項目。</para><para>沒有「焦點」的檢視會稍微暗化。</para>再次點"
"擊此按鈕來關閉其中一個檢視。"

#: dolphinmainwindow.cpp:1910
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"If the view has been split, this will pop the view in focus out into a new "
"window."
msgstr "如果處於分割檢視模式，這會將聚焦的檢視彈出成為新視窗。"

#: dolphinmainwindow.cpp:1918
#, kde-format
msgctxt "@action:intoolbar Stash"
msgid "Stash"
msgstr "暫存"

#: dolphinmainwindow.cpp:1919
#, kde-format
msgctxt "@info"
msgid "Opens the stash virtual directory in a split window"
msgstr "在分割視窗中開啟暫存的虛擬目錄"

#: dolphinmainwindow.cpp:1927
#, kde-format
msgctxt "@info:tooltip"
msgid "Refresh view"
msgstr "更新檢視"

#: dolphinmainwindow.cpp:1929
#, kde-kuit-format
msgctxt "@info:whatsthis refresh"
msgid ""
"<para>This refreshes the folder view.</para><para>If the contents of this "
"folder have changed, refreshing will re-scan this folder and show you a "
"newly-updated view of the files and folders contained here.</para><para>If "
"the view is split, this refreshes the one that is currently in focus.</para>"
msgstr ""
"<para>這會重新整理資料夾檢視。</para><para>如果這個資料夾的內容被變更了，重新"
"整理會在重新掃描它之後向您顯示更新的檔案和資料夾列表。</para><para>分割檢視時"
"這會重新整理目前焦點所在的檢視。</para>"

#: dolphinmainwindow.cpp:1936
#, kde-format
msgctxt "@action:inmenu View"
msgid "Stop"
msgstr "停止"

#: dolphinmainwindow.cpp:1937
#, kde-format
msgctxt "@info"
msgid "Stop loading"
msgstr "停止載入"

#: dolphinmainwindow.cpp:1938
#, kde-format
msgctxt "@info"
msgid "This stops the loading of the contents of the current folder."
msgstr "這會停止載入目前資料夾的內容。"

#: dolphinmainwindow.cpp:1943
#, kde-format
msgctxt "@action:inmenu Navigation Bar"
msgid "Editable Location"
msgstr "可編輯位置"

#: dolphinmainwindow.cpp:1945
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This toggles the <emphasis>Location Bar</emphasis> to be editable so you can "
"directly enter a location you want to go to.<nl/>You can also switch to "
"editing by clicking to the right of the location and switch back by "
"confirming the edited location."
msgstr ""
"這會切換<emphasis>位置工具列</emphasis>可編輯狀態，讓您能直接輸入您想要前往的"
"位置。<nl/>您也可以點擊位置右方來切換至編輯模式，確認編輯後的位置之後會切換回"
"來。"

#: dolphinmainwindow.cpp:1953
#, kde-format
msgctxt "@action:inmenu Navigation Bar"
msgid "Replace Location"
msgstr "取代位置"

#: dolphinmainwindow.cpp:1958
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This switches to editing the location and selects it so you can quickly "
"enter a different location."
msgstr "這會切換為編輯位置的狀態並選取位置文字，讓您能快速輸入另一個位置。"

#: dolphinmainwindow.cpp:1988
#, kde-format
msgctxt "@action:inmenu File"
msgid "Undo close tab"
msgstr "復原關閉分頁"

#: dolphinmainwindow.cpp:1989
#, kde-format
msgctxt "@info:whatsthis undo close tab"
msgid "This returns you to the previously closed tab."
msgstr "這會讓您回到之前關閉的分頁。"

#: dolphinmainwindow.cpp:1997
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This undoes the last change you made to files or folders.<nl/>Such changes "
"include <interface>creating</interface>, <interface>renaming</interface> and "
"<interface>moving</interface> them to a different location or to the "
"<filename>Trash</filename>. <nl/>Any changes that cannot be undone will ask "
"for your confirmation beforehand."
msgstr ""
"這會復原您對檔案或資料夾所進行的上一個變更。<nl/>可以復原的變更包含"
"<interface>建立</interface>、<interface>重新命名</interface>、<interface>移動"
"到另一個位置</interface>或<interface>移動</interface>到<filename>垃圾桶</"
"filename>。<nl/>任何不能復原的變更都會在進行前先向您詢問確認。"

#: dolphinmainwindow.cpp:2026
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"Go to your <filename>Home</filename> folder.<nl/>Every user account has "
"their own <filename>Home</filename> that contains their personal files, as "
"well as hidden folders for their applications' data and configuration files."
msgstr ""
"跳至您的 <filename>家目錄</filename>。<nl/>每個使用者帳號都有自己的 "
"<filename>家目錄</filename>，用來放他們的個人資料，以及應用程式資料用的隱藏資"
"料夾和設定檔案。夾。"

#: dolphinmainwindow.cpp:2033
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Compare Files"
msgstr "比較檔案"

#: dolphinmainwindow.cpp:2041
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a preferred search tool for the viewed location.</"
"para><para>Use <emphasis>More Search Tools</emphasis> menu to configure it.</"
"para>"
msgstr ""
"<para>這會為目前檢視的位置開啟偏好的搜尋工具。</para><para>使用 <emphasis>更"
"多搜尋工具</emphasis> 選單來設定它。</para>"

#: dolphinmainwindow.cpp:2049
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Open Terminal"
msgstr "開啟終端機"

#: dolphinmainwindow.cpp:2051
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a <emphasis>terminal</emphasis> application for the viewed "
"location.</para><para>To learn more about terminals use the help features in "
"the terminal application.</para>"
msgstr ""
"<para>這會在目前檢視的位置開啟 <emphasis>終端機</emphasis> 應用程式。</"
"para><para>關於終端機的更多資訊請利用終端機應用程式中的說明功能。</para>"

#. i18n: "Here" refers to the location(s) of the currently selected item(s) or the currently viewed location if nothing is selected.
#: dolphinmainwindow.cpp:2059
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Open Terminal Here"
msgstr "在此開啟終端機"

#: dolphinmainwindow.cpp:2061
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens <emphasis>terminal</emphasis> applications for the selected "
"items' locations.</para><para>To learn more about terminals use the help "
"features in the terminal application.</para>"
msgstr ""
"<para>這會在所選項目的位置開啟 <emphasis>終端機</emphasis> 應用程式。</"
"para><para>關於終端機的更多資訊請利用終端機應用程式中的說明功能。</para>"

#: dolphinmainwindow.cpp:2069
#, kde-format
msgctxt "@title:menu"
msgid "&Bookmarks"
msgstr "書籤(&B)"

#: dolphinmainwindow.cpp:2079
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This switches between having a <emphasis>Menubar</emphasis> and having "
"an <interface>%1</interface> button. Both contain mostly the same actions "
"and configuration options.</para><para>The Menubar takes up more space but "
"allows for fast and organized access to all actions an application has to "
"offer.</para><para>The %1 button is simpler and small which makes triggering "
"advanced actions more time consuming.</para>"
msgstr ""
"<para>這會切換使用<emphasis>選單列</emphasis>還是使用<interface>%1</"
"interface>按鈕。兩種介面都提供大致上相同的動作與設定選項。</para><para>選單列"
"需要更多空間，但可以更快地透過分類使用應用程式的所有動作。</para><para>%1 按"
"鈕較為簡潔，但會讓觸發進階動作變得更花時間。</para>"

#: dolphinmainwindow.cpp:2112
#, kde-format
msgctxt "@action:inmenu"
msgid "Go to Tab %1"
msgstr "跳到分頁 %1"

#: dolphinmainwindow.cpp:2125
#, kde-format
msgctxt "@action:inmenu"
msgid "Last Tab"
msgstr "上個分頁"

#: dolphinmainwindow.cpp:2126
#, kde-format
msgctxt "@action:inmenu"
msgid "Go to Last Tab"
msgstr "跳到上個分頁"

#: dolphinmainwindow.cpp:2132
#, kde-format
msgctxt "@action:inmenu"
msgid "Next Tab"
msgstr "下一分頁"

#: dolphinmainwindow.cpp:2133
#, kde-format
msgctxt "@action:inmenu"
msgid "Go to Next Tab"
msgstr "跳到下一分頁"

#: dolphinmainwindow.cpp:2139
#, kde-format
msgctxt "@action:inmenu"
msgid "Previous Tab"
msgstr "前一分頁"

#: dolphinmainwindow.cpp:2140
#, kde-format
msgctxt "@action:inmenu"
msgid "Go to Previous Tab"
msgstr "跳到前一分頁"

#: dolphinmainwindow.cpp:2147
#, kde-format
msgctxt "@action:inmenu"
msgid "Show Target"
msgstr "顯示目標"

#: dolphinmainwindow.cpp:2153
#, kde-format
msgctxt "@action:inmenu"
msgid "Open in New Tab"
msgstr "在新分頁開啟"

#: dolphinmainwindow.cpp:2158
#, kde-format
msgctxt "@action:inmenu"
msgid "Open in New Tabs"
msgstr "在新分頁開啟"

#: dolphinmainwindow.cpp:2163
#, kde-format
msgctxt "@action:inmenu"
msgid "Open in New Window"
msgstr "在新視窗開啟"

#: dolphinmainwindow.cpp:2168 panels/places/placespanel.cpp:45
#, kde-format
msgctxt "@action:inmenu"
msgid "Open in Split View"
msgstr "用分割檢視開啟"

#: dolphinmainwindow.cpp:2184
#, kde-format
msgctxt "@action:inmenu Panels"
msgid "Unlock Panels"
msgstr "解除鎖定面板"

#: dolphinmainwindow.cpp:2186
#, kde-format
msgctxt "@action:inmenu Panels"
msgid "Lock Panels"
msgstr "鎖定面板"

#: dolphinmainwindow.cpp:2189
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This switches between having panels <emphasis>locked</emphasis> or "
"<emphasis>unlocked</emphasis>.<nl/>Unlocked panels can be dragged to the "
"other side of the window and have a close button.<nl/>Locked panels are "
"embedded more cleanly."
msgstr ""
"這會切換面板<emphasis>鎖定</emphasis>或是<emphasis>解除鎖定</emphasis>。解除"
"鎖定的面板可以被拖曳到視窗另一邊並且會有一個關閉的按鈕。<nl/>鎖定的面板會比較"
"乾淨的嵌入在介面中。"

#: dolphinmainwindow.cpp:2198
#, kde-format
msgctxt "@title:window"
msgid "Information"
msgstr "資訊"

#: dolphinmainwindow.cpp:2221
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>To show or hide panels like this go to <interface>Menu|Panels</"
"interface> or <interface>View|Panels</interface>.</para>"
msgstr ""
"<para>要顯示或隱藏這種面板請使用<interface>選單|面板</interface>或<interface>"
"檢視|面板</interface>。</para>"

#: dolphinmainwindow.cpp:2228
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para> This toggles the <emphasis>information</emphasis> panel at the right "
"side of the window.</para><para>The panel provides in-depth information "
"about the items your mouse is hovering over or about the selected items. "
"Otherwise it informs you about the currently viewed folder.<nl/>For single "
"items a preview of their contents is provided.</para>"
msgstr ""
"<para>這會切換顯示視窗右方的<emphasis>資訊</emphasis>面板。</para><para>這個"
"面板提供關於您的滑鼠底下或是目前選取的項目的詳細資訊。滑鼠底下沒有項目也沒有"
"選取任何項目時，它會顯示關於目前檢視的資料夾的資訊。<nl/>只有顯示一個項目的資"
"訊時，這個面板也會提供該項目的內容預覽。</para>"

#: dolphinmainwindow.cpp:2236
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This panel provides in-depth information about the items your mouse is "
"hovering over or about the selected items. Otherwise it informs you about "
"the currently viewed folder.<nl/>For single items a preview of their "
"contents is provided.</para><para>You can configure which and how details "
"are given here by right-clicking.</para>"
msgstr ""
"<para>這個面板提供關於您的滑鼠底下或是目前選取的項目的詳細資訊。滑鼠底下沒有"
"項目也沒有選取任何項目時，它會顯示關於目前檢視的資料夾的資訊。<nl/>只有顯示一"
"個項目的資訊時，這個面板也會提供該項目的內容預覽。</para><para>您可以在此按右"
"鍵來設定要顯示哪些細節，以及要如何顯示細節。</para>"

#: dolphinmainwindow.cpp:2245
#, kde-format
msgctxt "@title:window"
msgid "Folders"
msgstr "資料夾"

#: dolphinmainwindow.cpp:2265
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This toggles the <emphasis>folders</emphasis> panel at the left side of the "
"window.<nl/><nl/>It shows the folders of the <emphasis>file system</"
"emphasis> in a <emphasis>tree view</emphasis>."
msgstr ""
"這會切換視窗左邊的<emphasis>資料夾</emphasis>面板。<nl/><nl/>它會以<emphasis>"
"樹狀圖</emphasis>方式顯示<emphasis>檔案系統</emphasis>的資料夾。"

#: dolphinmainwindow.cpp:2270
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This panel shows the folders of the <emphasis>file system</emphasis> "
"in a <emphasis>tree view</emphasis>.</para><para>Click a folder to go there. "
"Click the arrow to the left of a folder to see its subfolders. This allows "
"quick switching between any folders.</para>"
msgstr ""
"<para>這個面板會以<emphasis>樹狀檢視</emphasis>來顯示<emphasis>檔案系統</"
"emphasis>中的資料夾。</para><para>點擊一個資料夾來前往它。點擊資料夾左方的箭"
"頭來看它的子資料夾。這讓您可以快速在資料夾之間切換。</para>"

#: dolphinmainwindow.cpp:2280
#, kde-format
msgctxt "@title:window Shell terminal"
msgid "Terminal"
msgstr "終端機"

#: dolphinmainwindow.cpp:2305
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This toggles the <emphasis>terminal</emphasis> panel at the bottom of "
"the window.<nl/>The location in the terminal will always match the folder "
"view so you can navigate using either.</para><para>The terminal panel is not "
"needed for basic computer usage but can be useful for advanced tasks. To "
"learn more about terminals use the help features in a standalone terminal "
"application like Konsole.</para>"
msgstr ""
"<para>這會切換視窗下方的<emphasis>終端機</emphasis>面板。<nl/>終端機的位置會"
"與上方資料夾檢視同步，所以不管是用終端機還是資料夾檢視在資料夾間移動都是可以"
"的。</para><para>終端機面板在普通的電腦使用上不會有需要，但是對於進階的工作是"
"很有幫助的。對於終端機的更多資訊請使用如 Konsole 等獨立終端機應用程式的說明功"
"能。</para>"

#: dolphinmainwindow.cpp:2313
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This is the <emphasis>terminal</emphasis> panel. It behaves like a "
"normal terminal but will match the location of the folder view so you can "
"navigate using either.</para><para>The terminal panel is not needed for "
"basic computer usage but can be useful for advanced tasks. To learn more "
"about terminals use the help features in a standalone terminal application "
"like Konsole.</para>"
msgstr ""
"<para>這是<emphasis>終端機</emphasis>面板。它的運作方式跟正常終端機一樣，不過"
"會與資料夾檢視同步位置，所以不管是用終端機還是資料夾檢視在資料夾間移動都是可"
"以的。</para><para>終端機面板在普通的電腦使用上不會有需要，但是對於進階的工作"
"是很有幫助的。對於終端機的更多資訊請使用如 Konsole 等獨立終端機應用程式的說明"
"功能。</para>"

#: dolphinmainwindow.cpp:2323 dolphinmainwindow.cpp:2914
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Focus Terminal Panel"
msgstr "聚焦於終端機面板"

#: dolphinmainwindow.cpp:2324
#, kde-format
msgctxt "@info:tooltip"
msgid "Move keyboard focus to and from the Terminal panel."
msgstr "將鍵盤輸入的焦點移入或移出終端機面板。"

#: dolphinmainwindow.cpp:2337
#, kde-format
msgctxt "@title:window"
msgid "Places"
msgstr "書籤"

#: dolphinmainwindow.cpp:2365
#, kde-format
msgctxt "@item:inmenu"
msgid "Show Hidden Places"
msgstr "顯示隱藏位置"

#: dolphinmainwindow.cpp:2369
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"This displays all places in the places panel that have been hidden. They "
"will appear semi-transparent and allow you to uncheck their \"Hide\" "
"property."
msgstr ""
"這會顯示被隱藏的書籤。它們將會以半透明方式顯示，讓您可以取消勾選「隱藏」屬"
"性。"

#: dolphinmainwindow.cpp:2381
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This toggles the <emphasis>places</emphasis> panel at the left side of "
"the window.</para><para>It allows you to go to locations you have bookmarked "
"and to access disk or media attached to the computer or to the network. It "
"also contains sections to find recently saved files or files of a certain "
"type.</para>"
msgstr ""
"<para>這會切換視窗左邊的<emphasis>快速存取</emphasis>面板。</para><para>這個"
"面板讓您能夠快速前往加入書籤的位置，或是存取附加到電腦上或區域網路上的磁碟或"
"媒體。它也包含讓您尋找最近儲存的檔案以及某些類型的檔案的區塊。</para>"

#: dolphinmainwindow.cpp:2388
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This is the <emphasis>Places</emphasis> panel. It allows you to go to "
"locations you have bookmarked and to access disk or media attached to the "
"computer or to the network. It also contains sections to find recently saved "
"files or files of a certain type.</para><para>Click on an entry to go there. "
"Click with the right mouse button instead to open any entry in a new tab or "
"new window.</para><para>New entries can be added by dragging folders onto "
"this panel. Right-click any section or entry to hide it. Right-click an "
"empty space on this panel and select <interface>Show Hidden Places</"
"interface> to display it again.</para>"
msgstr ""
"<para>這是<emphasis>快速存取</emphasis>面板。它讓您能夠快速前往加入書籤的位"
"置，或是存取附加到電腦上或區域網路上的磁碟或媒體。它也包含讓您尋找最近儲存的"
"檔案以及某些類型的檔案的區塊。</para><para>點擊項目來前往該位置。用右鍵來點擊"
"來在新分頁或視窗開啟該位置。</para><para>新項目可以透過拖曳資料夾到這個面板來"
"新增。右鍵點擊任何區塊或項目來隱藏它。右鍵點擊這個面板的空白區域並選取"
"<interface>顯示隱藏位置</interface>來重新顯示它。</para>"

#: dolphinmainwindow.cpp:2402 dolphinmainwindow.cpp:2932
#, kde-format
msgctxt "@action:inmenu View"
msgid "Focus Places Panel"
msgstr "聚焦於書籤面板"

#: dolphinmainwindow.cpp:2403
#, kde-format
msgctxt "@info:tooltip"
msgid "Move keyboard focus to and from the Places panel."
msgstr "將鍵盤輸入的焦點移入或移出書籤面板。"

#: dolphinmainwindow.cpp:2409
#, kde-format
msgctxt "@action:inmenu View"
msgid "Show Panels"
msgstr "顯示面板"

#: dolphinmainwindow.cpp:2478
#, kde-format
msgctxt "@info"
msgid ""
"Cannot rename: You do not have permission to rename items in this folder."
msgstr "無法重新命名：您沒有在此資料夾重新命名項目的權限。"

#: dolphinmainwindow.cpp:2481 dolphinmainwindow.cpp:2498
#, kde-format
msgctxt "@info"
msgid ""
"Cannot delete: You do not have permission to remove items from this folder."
msgstr "無法刪除：您沒有自此資料夾移除項目的權限。"

#: dolphinmainwindow.cpp:2483
#, kde-format
msgctxt "@info"
msgid "Cannot cut: You do not have permission to move items from this folder."
msgstr "無法剪下：您沒有從此資料夾移動項目的權限。"

#: dolphinmainwindow.cpp:2488
#, kde-format
msgctxt "@info"
msgid ""
"Cannot duplicate here: You do not have permission to create items in this "
"folder."
msgstr "無法建立複本：您沒有在此資料夾建立新項目的權限。"

#: dolphinmainwindow.cpp:2510
#, kde-format
msgctxt "@info"
msgid "Cannot copy to other view: No files selected."
msgstr "無法複製到另一個檢視：未選取檔案。"

#: dolphinmainwindow.cpp:2512
#, kde-format
msgctxt "@info"
msgid "Cannot move to other view: No files selected."
msgstr "無法移動到另一個檢視：未選取檔案。"

#: dolphinmainwindow.cpp:2531
#, kde-format
msgctxt "@info"
msgid "Cannot copy to other view: The other view already contains these items."
msgstr "無法複製到兩一個檢視：另一個檢視已經包含這些項目。"

#: dolphinmainwindow.cpp:2534
#, kde-format
msgctxt "@info"
msgid "Cannot move to other view: The other view already contains these items."
msgstr "無法移動到兩一個檢視：另一個檢視已經包含這些項目。"

#: dolphinmainwindow.cpp:2539
#, kde-format
msgctxt "@info"
msgid ""
"Cannot copy to other view: You do not have permission to write into the "
"destination folder."
msgstr "無法複製到另一個檢視：您沒有寫入目的地資料夾的權限。"

#: dolphinmainwindow.cpp:2543
#, kde-format
msgctxt "@info"
msgid ""
"Cannot move to other view: You do not have permission to write into the "
"destination folder."
msgstr "無法移動到另一個檢視：您沒有寫入目的地資料夾的權限。"

#: dolphinmainwindow.cpp:2549
#, kde-format
msgctxt "@info"
msgid ""
"Cannot move to other view: You do not have permission to move items from "
"this folder."
msgstr "無法移動到另一個檢視：您沒有從此資料夾移動項目的權限。"

#: dolphinmainwindow.cpp:2573
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>Go to the folder that contains the currently viewed one.</"
"para><para>All files and folders are organized in a hierarchical "
"<emphasis>file system</emphasis>. At the top of this hierarchy is a "
"directory that contains all data connected to this computer—the "
"<emphasis>root directory</emphasis>.</para>"
msgstr ""
"<para>移動到包含目前檢視資料夾的上層資料夾。</para><para>所有檔案和資料夾都是"
"以階層方式置放於<emphasis>檔案系統</emphasis>之中。這個階層昂的頂端是包含連線"
"到此電腦的所有資料的目錄——也就是<emphasis>根目錄</emphasis>。</para>"

#: dolphinmainwindow.cpp:2664
#, kde-format
msgctxt "@action:intoolbar Close left view"
msgid "Close"
msgstr "關閉"

#: dolphinmainwindow.cpp:2665
#, kde-format
msgctxt "@info"
msgid "Close left view"
msgstr "關閉左方檢視"

#: dolphinmainwindow.cpp:2667
#, kde-format
msgctxt "@action:intoolbar Move left view to a new window"
msgid "Pop out Left View"
msgstr "彈出左方檢視"

#: dolphinmainwindow.cpp:2668
#, kde-format
msgctxt "@info"
msgid "Move left view to a new window"
msgstr "將左方檢視移至新視窗"

#: dolphinmainwindow.cpp:2670
#, kde-format
msgctxt "@action:intoolbar Close right view"
msgid "Close"
msgstr "關閉"

#: dolphinmainwindow.cpp:2671
#, kde-format
msgctxt "@info"
msgid "Close right view"
msgstr "關閉右方檢視"

#: dolphinmainwindow.cpp:2673
#, kde-format
msgctxt "@action:intoolbar Move right view to a new window"
msgid "Pop out Right View"
msgstr "彈出右方檢視"

#: dolphinmainwindow.cpp:2674
#, kde-format
msgctxt "@info"
msgid "Move right view to a new window"
msgstr "將右方檢視移至新視窗"

#: dolphinmainwindow.cpp:2683
#, kde-format
msgctxt "@action:intoolbar Split view"
msgid "Split"
msgstr "分割"

#: dolphinmainwindow.cpp:2684
#, kde-format
msgctxt "@info"
msgid "Split view"
msgstr "分割檢視"

#: dolphinmainwindow.cpp:2686
#, kde-format
msgctxt "@action:intoolbar Move view in focus to a new window"
msgid "Pop out"
msgstr "彈出"

#: dolphinmainwindow.cpp:2741
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This is the <emphasis>Menubar</emphasis>. It provides access to "
"commands and configuration options. Left-click on any of the menus on this "
"bar to see its contents.</para><para>The Menubar can be hidden by unchecking "
"<interface>Settings|Show Menubar</interface>. Then most of its contents "
"become available through a <interface>Menu</interface> button on the "
"<emphasis>Toolbar</emphasis>.</para>"
msgstr ""
"<para>這是<emphasis>選單列</emphasis>。它提供指令與設定選項的存取。左鍵點擊任"
"何選單來看它的內容。</para><para>選單列可以透過取消勾選<interface>設定|顯示選"
"單列</interface>來隱藏。隱藏之後它的大部分內容還是會整理在<emphasis>工具列</"
"emphasis>上的<interface>選單</interface>按鈕當中。</para>"

#: dolphinmainwindow.cpp:2748
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This is the <emphasis>Toolbar</emphasis>. It allows quick access to "
"frequently used actions.</para><para>It is highly customizable. All items "
"you see in the <interface>Menu</interface> or in the <interface>Menubar</"
"interface> can be placed on the Toolbar. Just right-click on it and select "
"<interface>Configure Toolbars…</interface> or find this action within the "
"<interface>menu</interface>.</para><para>The location of the bar and the "
"style of its buttons can also be changed in the right-click menu. Right-"
"click a button if you want to show or hide its text.</para>"
msgstr ""
"<para>這是<emphasis>工具列</emphasis>。它提供常用動作的快速存取。</"
"para><para>工具列可以隨意自訂。所有在<interface>選單</interface>或<interface>"
"選單列</interface>裡的項目都可以放在工具列中。要自訂它，只要右鍵點擊工具列並"
"選取<interface>設定工具列…</interface>，或是在<interface>選單</interface>中找"
"這個動作，就可以了。</para><para>工具列的位置和它的按鈕的風格也可以在右鍵選單"
"中變更。右鍵點擊按鈕來隱藏或顯示它的文字說明。</para>"

#: dolphinmainwindow.cpp:2760
#, kde-kuit-format
msgctxt "@info:whatsthis main view"
msgid ""
"<para>Here you can see the <emphasis>folders</emphasis> and <emphasis>files</"
"emphasis> that are at the location described in the <interface>Location Bar</"
"interface> above. This area is the central part of this application where "
"you navigate to the files you want to use.</para><para>For an elaborate and "
"general introduction to this application <link url='https://userbase.kde.org/"
"Dolphin/File_Management#Introduction_to_Dolphin'>click here</link>. This "
"will open an introductory article from the <emphasis>KDE UserBase Wiki</"
"emphasis>.</para><para>For brief explanations of all the features of this "
"<emphasis>view</emphasis> <link url='help:/dolphin/dolphin-view.html'>click "
"here</link> instead. This will open a page from the <emphasis>Handbook</"
"emphasis> that covers the basics.</para>"
msgstr ""
"<para>在此您可以看到上方<emphasis>位置列</emphasis>所描述的位置當中的"
"<emphasis>資料夾</emphasis>及<interface>檔案</interface>。這個區域是此應用程"
"式的中樞，讓您瀏覽到要使用的檔案。</para><para>關於此應用程式的通用詳細介紹"
"<link url='https://userbase.kde.org/Dolphin/"
"File_Management#Introduction_to_Dolphin'>請見此處</link>。這會開啟 "
"<emphasis>KDE UserBase Wiki</emphasis> 上面的介紹文章。</para><para>關於此"
"<emphasis>檢視</emphasis>的功能的簡要介紹可改為<link url='help:/dolphin/"
"dolphin-view.html'>參照此處</link>。這會開啟<emphasis>手冊</emphasis>當中介紹"
"基礎的頁面。</para>"

#: dolphinmainwindow.cpp:2776
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a window that lists the <emphasis>keyboard shortcuts</"
"emphasis>.<nl/>There you can set up key combinations to trigger an action "
"when they are pressed simultaneously. All commands in this application can "
"be triggered this way.</para>"
msgstr ""
"<para>這會在一個新視窗中顯示<emphasis>鍵盤快捷鍵</emphasis>一覽。<nl/>在此您"
"也可以設定同時按下鍵盤組合時要觸發的動作。此應用程式中所有命令皆可以此方式觸"
"發。</para>"

#: dolphinmainwindow.cpp:2782
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a window in which you can change which buttons appear on "
"the <emphasis>Toolbar</emphasis>.</para><para>All items you see in the "
"<interface>Menu</interface> can also be placed on the Toolbar.</para>"
msgstr ""
"<para>這會開啟一個視窗讓您變更哪些按鈕要出現在<emphasis>工具列</emphasis>上。"
"</para><para>您可以將<interface>選單</interface>當中任何項目放置於工具列中。"
"</para>"

#: dolphinmainwindow.cpp:2786
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens a window where you can change a multitude of settings for this "
"application. For an explanation of the various settings go to the chapter "
"<emphasis>Configuring Dolphin</emphasis> in <interface>Help|Dolphin "
"Handbook</interface>."
msgstr ""
"這會開啟一個視窗讓您調整這個應用程式的各種設定。關於各個選項的說明請見"
"<interface>說明|Dolphin 手冊</interface>當中的<emphasis>設定 Dolphin</"
"emphasis>章節。"

#. i18n: If the external link isn't available in your language it might make
#. sense to state the external link's language in brackets to not
#. frustrate the user. If there are multiple languages that the user might
#. know with a reasonable chance you might want to have 2 external links.
#. The same might be true for any external link you translate.
#: dolphinmainwindow.cpp:2806
#, kde-kuit-format
msgctxt "@info:whatsthis handbook"
msgid ""
"<para>This opens the Handbook for this application. It provides explanations "
"for every part of <emphasis>Dolphin</emphasis>.</para><para>If you want more "
"elaborate introductions to the different features of <emphasis>Dolphin</"
"emphasis> <link url='https://userbase.kde.org/Dolphin/File_Management'>click "
"here</link>. It will open the dedicated page in the KDE UserBase Wiki.</para>"
msgstr ""
"<para>這會開啟這個應用程式的手冊。它提供 <emphasis>Dolphin</emphasis> 所有部"
"分的說明。</para><para>如果您需要 <emphasis>Dolphin</emphasis> 不同功能的詳細"
"介紹，<link url='https://userbase.kde.org/Dolphin/File_Management'>請點擊此處"
"</link>。它會開啟 KDE UserBase Wiki 當中對應的頁面。</para><para>註：目前手冊"
"和 UserBasse Wiki 都沒有中文版。</para>"

#: dolphinmainwindow.cpp:2811
#, kde-kuit-format
msgctxt "@info:whatsthis whatsthis button"
msgid ""
"<para>This is the button that invokes the help feature you are using right "
"now! Click it, then click any component of this application to ask \"What's "
"this?\" about it. The mouse cursor will change appearance if no help is "
"available for a spot.</para><para>There are two other ways to get help: The "
"<link url='help:/dolphin/index.html'>Dolphin Handbook</link> and the <link "
"url='https://userbase.kde.org/Dolphin/File_Management'>KDE UserBase Wiki</"
"link>.</para><para>The \"What's this?\" help is missing in most other "
"windows so don't get too used to this.</para>"
msgstr ""
"<para>這個按鈕就是觸發您正在使用的說明功能的按鈕！點擊它之後再點擊應用程式中"
"的任何元件來詢問「這是什麼？」。游標底下的東西沒有說明的時候會改變外觀，來顯"
"示沒有可用的說明。</para><para>另外還有兩種方式可以取得說明：<link "
"url='help:/dolphin/index.html'>Dolphin 手冊</link>和 <link url='https://"
"userbase.kde.org/Dolphin/File_Management'>KDE UserBase Wiki</link>。</"
"para><para>其他大部分視窗都沒有「這是什麼？」的說明，所以可能不要太仰賴這個功"
"能。</para>"

#: dolphinmainwindow.cpp:2822
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a window that will guide you through reporting errors or "
"flaws in this application or in other KDE software.</para><para>High-quality "
"bug reports are much appreciated. To learn how to make your bug report as "
"effective as possible <link url='https://community.kde.org/Get_Involved/"
"Bug_Reporting'>click here</link>.</para>"
msgstr ""
"<para>這會開啟錯誤回報視窗，它會指引您如何回報這個應用程式或其他 KDE 軟體當中"
"的錯誤或問題。</para><para>請儘量維持錯誤回報的品質。關於如何讓您的錯誤回報儘"
"可能有效，<link url='https://community.kde.org/Get_Involved/Bug_Reporting'>請"
"點擊此處</link>。</para>"

#: dolphinmainwindow.cpp:2831
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>This opens a <emphasis>web page</emphasis> where you can donate to "
"support the continued work on this application and many other projects by "
"the <emphasis>KDE</emphasis> community.</para><para>Donating is the easiest "
"and fastest way to efficiently support KDE and its projects. KDE projects "
"are available for free therefore your donation is needed to cover things "
"that require money like servers, contributor meetings, etc.</"
"para><para><emphasis>KDE e.V.</emphasis> is the non-profit organization "
"behind the KDE community.</para>"
msgstr ""
"<para>這會開啟一個<emphasis>網頁</emphasis>讓您能夠捐款支持 <emphasis>KDE</"
"emphasis> 社群對這個應用程式及其他許多專案的持續開發。</para><para>捐款是支"
"持 KDE 和它的專案最簡單且最快的方式。KDE 專案皆可免費取得，因此需要您的捐助才"
"能維持需要金錢的東西，像是伺服器、貢獻者會議等等。</para><para><emphasis>KDE "
"e.V.</emphasis> 是 KDE 社群背後的非營利組織。</para>"

#: dolphinmainwindow.cpp:2844
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"With this you can change the language this application uses.<nl/>You can "
"even set secondary languages which will be used if texts are not available "
"in your preferred language."
msgstr ""
"在此您可以變更此應用程式所使用的語言。<nl/>您還可以設定備用語言，如果偏好語言"
"有缺乏的文本時便會嘗試各個備用語言。"

#: dolphinmainwindow.cpp:2849
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens a window that informs you about the version, license, used "
"libraries and maintainers of this application."
msgstr ""
"這會開啟一個視窗告訴您這個應用程式的版本、授權、使用的函式庫與維護者有關的資"
"訊。"

#: dolphinmainwindow.cpp:2854
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This opens a window with information about <emphasis>KDE</emphasis>. The KDE "
"community are the people behind this free software.<nl/>If you like using "
"this application but don't know about KDE or want to see a cute dragon have "
"a look!"
msgstr ""
"這會開啟一個包含關於 <emphasis>KDE</emphasis> 的資訊的視窗。KDE 社群是這個自"
"由軟體背後的人們。<nl/>如果您喜歡使用這個應用程式但不知道 KDE 或是想要看看一"
"隻可愛的龍，那就進來看看吧！"

#: dolphinmainwindow.cpp:2908 dolphinmainwindow.cpp:2919
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Defocus Terminal Panel"
msgstr "焦點移離終端機面板"

#: dolphinmainwindow.cpp:2926
#, kde-format
msgctxt "@action:inmenu View"
msgid "Defocus Terminal Panel"
msgstr "焦點移離終端機面板"

#: dolphinmainwindow.cpp:2937
#, kde-format
msgctxt "@action:inmenu View"
msgid "Defocus Places Panel"
msgstr "焦點移離書籤面板"

#: dolphinnavigatorswidgetaction.cpp:200
#, kde-format
msgid "Enter server URL (e.g. smb://[ip address])"
msgstr "輸入伺服器網址（例如：smb://[ip address]）"

#: dolphinnavigatorswidgetaction.cpp:227
#, kde-format
msgctxt "@action:button"
msgid "Empty Trash"
msgstr "清空垃圾桶"

#: dolphinnavigatorswidgetaction.cpp:228
#, kde-format
msgid "Empties Trash to create free space"
msgstr "清空垃圾桶以空出空間"

#: dolphinnavigatorswidgetaction.cpp:254
#, kde-format
msgctxt "@action:button"
msgid "Add Network Folder"
msgstr "新增網路資料夾"

#: dolphinnavigatorswidgetaction.cpp:293
#, kde-format
msgctxt "@action:inmenu"
msgid "Location Bar"
msgid_plural "Location Bars"
msgstr[0] "位置工具列"

#: dolphinpackageinstaller.cpp:46
#, kde-format
msgctxt "@info:shell about system packages"
msgid "Could not find package %1."
msgstr "找不到軟體包 %1。"

#: dolphinpackageinstaller.cpp:89
#, kde-format
msgctxt "@info %1 is error code"
msgid "Installation exited without reporting success. (%1)"
msgstr "安裝已離開而未回報成功。(%1)"

#: dolphinpackageinstaller.cpp:108
#, kde-kuit-format
msgctxt ""
"@info:shell %1 is package name, %2 is error message, %3 is error e.g. "
"'ErrorNoNetwork'"
msgid ""
"Installing <application>%1</application> failed: %2 (%3)<nl/>Please try "
"installing <application>%1</application> manually instead."
msgstr ""
"安裝 <application>%1</application> 失敗了：%2 (%3)<nl/>請嘗試改為自行安裝 "
"<application>%1</application>。"

#: dolphinpart.cpp:148
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "&Edit File Type…"
msgstr "編輯檔案型態(&E)…"

#: dolphinpart.cpp:152
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Select Items Matching…"
msgstr "選取符合項目…"

#: dolphinpart.cpp:157
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Unselect Items Matching…"
msgstr "取消選取符合項目…"

#: dolphinpart.cpp:163
#, kde-format
msgctxt "@action:inmenu Edit"
msgid "Unselect All"
msgstr "全部取消選取"

#: dolphinpart.cpp:178
#, kde-format
msgctxt "@action:inmenu Go"
msgid "App&lications"
msgstr "應用程式(&L)"

#: dolphinpart.cpp:179
#, kde-format
msgctxt "@action:inmenu Go"
msgid "&Network Folders"
msgstr "網路資料夾(&N)"

#: dolphinpart.cpp:180
#, kde-format
msgctxt "@action:inmenu Go"
msgid "Trash"
msgstr "垃圾桶"

#: dolphinpart.cpp:183
#, kde-format
msgctxt "@action:inmenu Go"
msgid "Autostart"
msgstr "自動啟動"

#: dolphinpart.cpp:189
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Find File…"
msgstr "尋找檔案…"

#: dolphinpart.cpp:195
#, kde-format
msgctxt "@action:inmenu Tools"
msgid "Open &Terminal"
msgstr "開啟終端機(&T)"

#: dolphinpart.cpp:447
#, kde-format
msgctxt "@title:window"
msgid "Select"
msgstr "選取"

#: dolphinpart.cpp:447
#, kde-format
msgid "Select all items matching this pattern:"
msgstr "選取符合此樣式的所有項目："

#: dolphinpart.cpp:452
#, kde-format
msgctxt "@title:window"
msgid "Unselect"
msgstr "取消選取"

#: dolphinpart.cpp:452
#, kde-format
msgid "Unselect all items matching this pattern:"
msgstr "取消選取符合此樣式的所有項目："

#. i18n: ectx: Menu (edit)
#: dolphinpart.rc:5
#, kde-format
msgid "&Edit"
msgstr "編輯(&E)"

#. i18n: ectx: Menu (selection)
#: dolphinpart.rc:15
#, kde-format
msgctxt "@title:menu"
msgid "Selection"
msgstr "選擇區"

#. i18n: ectx: Menu (view)
#: dolphinpart.rc:24
#, kde-format
msgid "&View"
msgstr "檢視(&V)"

#. i18n: ectx: Menu (go)
#: dolphinpart.rc:33
#, kde-format
msgid "&Go"
msgstr "前往(&G)"

#. i18n: ectx: Menu (tools)
#: dolphinpart.rc:41
#, kde-format
msgctxt "@title:menu"
msgid "Tools"
msgstr "工具"

#. i18n: ectx: ToolBar (mainToolBar)
#: dolphinpart.rc:51
#, kde-format
msgctxt "@title:menu"
msgid "Dolphin Toolbar"
msgstr "Dolphin 工具列"

#: dolphinrecenttabsmenu.cpp:18
#, kde-format
msgid "Recently Closed Tabs"
msgstr "最近關閉的分頁"

#: dolphinrecenttabsmenu.cpp:23
#, kde-format
msgid "Empty Recently Closed Tabs"
msgstr "清空最近關閉的分頁"

#: dolphinrecenttabsmenu.cpp:37 dolphinrecenttabsmenu.cpp:40
#: dolphinviewcontainer.cpp:514 search/dolphinsearchbox.cpp:300
#, kde-format
msgid "Search for %1 in %2"
msgstr "在 %2 中搜尋 %1"

#: dolphintabbar.cpp:155
#, kde-format
msgctxt "@action:inmenu"
msgid "New Tab"
msgstr "新增分頁"

#: dolphintabbar.cpp:156
#, kde-format
msgctxt "@action:inmenu"
msgid "Detach Tab"
msgstr "分離分頁"

#: dolphintabbar.cpp:157
#, kde-format
msgctxt "@action:inmenu"
msgid "Close Other Tabs"
msgstr "關閉其他分頁"

#: dolphintabbar.cpp:158
#, kde-format
msgctxt "@action:inmenu"
msgid "Close Tab"
msgstr "關閉分頁"

#. i18n: %1 is the primary view and %2 the secondary view. For left to right languages the primary view is on the left so we also want it to be on the
#. left in the tab name. In right to left languages the primary view would be on the right so the tab name should match.
#: dolphintabwidget.cpp:506
#, kde-format
msgctxt "@title:tab Active primary view | (Inactive secondary view)"
msgid "%1 | (%2)"
msgstr "%1 | (%2)"

#. i18n: %1 is the primary view and %2 the secondary view. For left to right languages the primary view is on the left so we also want it to be on the
#. left in the tab name. In right to left languages the primary view would be on the right so the tab name should match.
#: dolphintabwidget.cpp:510
#, kde-format
msgctxt "@title:tab (Inactive primary view) | Active secondary view"
msgid "(%1) | %2"
msgstr "(%1) | %2"

#. i18n: ectx: Menu (location_bar)
#: dolphinui.rc:61
#, kde-format
msgctxt "@title:menu"
msgid "Location Bar"
msgstr "位置工具列"

#. i18n: ectx: ToolBar (mainToolBar)
#: dolphinui.rc:106
#, kde-format
msgctxt "@title:menu"
msgid "Main Toolbar"
msgstr "主工具列"

#: dolphinurlnavigator.cpp:38
#, kde-kuit-format
msgctxt "@info:whatsthis location bar"
msgid ""
"<para>This describes the location of the files and folders displayed below.</"
"para><para>The name of the currently viewed folder can be read at the very "
"right. To the left of it is the name of the folder that contains it. The "
"whole line is called the <emphasis>path</emphasis> to the current location "
"because following these folders from left to right leads here.</"
"para><para>This interactive path is more powerful than one would expect. To "
"learn more about the basic and advanced features of the location bar <link "
"url='help:/dolphin/location-bar.html'>click here</link>. This will open the "
"dedicated page in the Handbook.</para>"
msgstr ""
"<para>此項目描述下方所顯示的檔案與資料夾的位置。</para><para>目前檢視資料夾的"
"名稱在最右邊。在它左邊是包含它的資料夾。這整行叫做目前位置的<emphasis>路徑</"
"emphasis>，因為從左到右跟著路徑中的資料夾走就會走到目前位置。</para><para>這"
"個互動式的路徑可能比您預想的還要強大。請<link url='help:/dolphin/location-"
"bar.html'>參閱此處</link>以取得關於位置列的基礎與進階功能的更多資訊。這會在手"
"冊當中開啟它對應的頁面。</para>"

#: dolphinurlnavigator.cpp:56
#, kde-format
msgctxt "@info:tooltip of a 'locked' symbol in url navigator"
msgid "This folder is not writable for you."
msgstr "您無法寫入此資料夾。"

#: dolphinviewcontainer.cpp:95
#, kde-kuit-format
msgctxt "@info:whatsthis findbar"
msgid ""
"<para>This helps you find files and folders. Enter a <emphasis>search term</"
"emphasis> and specify search settings with the buttons at the bottom:"
"<list><item>Filename/Content: Does the item you are looking for contain the "
"search terms within its filename or its contents?<nl/>The contents of "
"images, audio files and videos will not be searched.</item><item>From Here/"
"Everywhere: Do you want to search in this folder and its sub-folders or "
"everywhere?</item><item>More Options: Click this to search by media type, "
"access time or rating.</item><item>More Search Tools: Install other means to "
"find an item.</item></list></para>"
msgstr ""
"<para>這會幫您找到檔案或資料夾。輸入<emphasis>搜尋字串</emphasis>，並利用下方"
"按鈕指定搜尋設定：<list><item>檔案名稱/內容：您要尋找的項目是在它的檔案名稱中"
"還是它的內容中包含搜尋字串？<nl/>不會搜尋影像、音效或影片檔案的內容。</"
"item><item>從這裡/任何地方：您要在這個資料夾和它的子資料夾中搜尋，還是要在所"
"有地方搜尋？</item><item>更多選項：點此來依媒體類型、存取時間或評價來搜尋。</"
"item><item>更多搜尋工具：安裝其他尋找項目的方式。</item></list></para>"

#: dolphinviewcontainer.cpp:115
#, kde-format
msgid "Running Dolphin as root can be dangerous. Please be careful."
msgstr "以管理員權限執行 Dolphin 可能有危險性，請小心使用。"

#: dolphinviewcontainer.cpp:166
#, kde-format
msgctxt "@info:progress"
msgid "Loading folder…"
msgstr "載入資料夾中…"

#: dolphinviewcontainer.cpp:169
#, kde-format
msgctxt "@info:progress"
msgid "Sorting…"
msgstr "排序中…"

#: dolphinviewcontainer.cpp:559
#, kde-format
msgid "Search"
msgstr "搜尋"

#: dolphinviewcontainer.cpp:561
#, kde-format
msgid "Search for %1"
msgstr "搜尋 %1"

#: dolphinviewcontainer.cpp:643
#, kde-format
msgctxt "@info"
msgid "Searching…"
msgstr "搜尋中…"

#: dolphinviewcontainer.cpp:663
#, kde-format
msgctxt "@info:status"
msgid "No items found."
msgstr "找不到任何項目。"

#: dolphinviewcontainer.cpp:847
#, kde-format
msgctxt "@info:status"
msgid "Dolphin does not support web pages, the web browser has been launched"
msgstr "Dolphin 不支援網頁，已啟動瀏覽器"

#: dolphinviewcontainer.cpp:850
#, kde-format
msgctxt "@info:status"
msgid ""
"Protocol not supported by Dolphin, default application has been launched"
msgstr "此通訊協定不受 Dolphin 支援，已啟動預設應用程式"

#: dolphinviewcontainer.cpp:857
#, kde-format
msgctxt "@info:status"
msgid "Invalid protocol '%1'"
msgstr "無效協定 '%1'"

#: dolphinviewcontainer.cpp:859
#, kde-format
msgctxt "@info:status"
msgid "Invalid protocol"
msgstr "無效的協定"

#: dolphinviewcontainer.cpp:950
#, kde-format
msgctxt "@info"
msgid "Authorization required to enter this folder."
msgstr "需要授權才能進入此資料夾。"

#: dolphinviewcontainer.cpp:992 dolphinviewcontainer.cpp:995
#, kde-kuit-format
msgid ""
"Current location changed, <filename>%1</filename> is no longer accessible."
msgstr "目前位置已變更，不再能夠存取 <filename>%1</filename>。"

#: filterbar/filterbar.cpp:29
#, kde-format
msgctxt "@info:tooltip"
msgid "Keep Filter When Changing Folders"
msgstr "變更資料夾後仍保留過濾器"

#: filterbar/filterbar.cpp:36
#, kde-format
msgid "Filter…"
msgstr "過濾…"

#: filterbar/filterbar.cpp:44
#, kde-format
msgctxt "@info:tooltip"
msgid "Hide Filter Bar"
msgstr "隱藏過濾器列"

#: itemactions/movetonewfolderitemaction.cpp:31
#, kde-format
msgctxt "@action:inmenu"
msgid "Move to New Folder…"
msgstr "移動到新資料夾…"

#: kitemviews/kfileitemlisttostring.cpp:22
#, kde-format
msgctxt "Textual representation of a file. %1 is the name of the file/folder."
msgid "\"%1\""
msgstr "\"%1\""

#: kitemviews/kfileitemlisttostring.cpp:26
#, kde-format
msgctxt ""
"Textual representation of two files. %1 and %2 are names of files/folders."
msgid "\"%1\" and \"%2\""
msgstr "\"%1\" 和 \"%2\""

#: kitemviews/kfileitemlisttostring.cpp:30
#, kde-format
msgctxt ""
"Textual representation of three files. %1, %2 and %3 are names of files/"
"folders."
msgid "\"%1\", \"%2\" and \"%3\""
msgstr "\"%1\"、\"%2\" 和 \"%3\""

#: kitemviews/kfileitemlisttostring.cpp:37
#, kde-format
msgctxt ""
"Textual representation of four files. %1, %2, %3 and %4 are names of files/"
"folders."
msgid "\"%1\", \"%2\", \"%3\" and \"%4\""
msgstr "\"%1\"、\"%2\"、\"%3\" 和 \"%4\""

#: kitemviews/kfileitemlisttostring.cpp:45
#, kde-format
msgctxt ""
"Textual representation of five files. %1, %2, %3, %4 and %5 are names of "
"files/folders."
msgid "\"%1\", \"%2\", \"%3\", \"%4\" and \"%5\""
msgstr "\"%1\"、\"%2\"、\"%3\"、\"%4\" 和 \"%5\""

#: kitemviews/kfileitemlisttostring.cpp:65
#, kde-format
msgctxt "Textual representation of selected files. %1 is the number of files."
msgid "One Selected File"
msgid_plural "%1 Selected Files"
msgstr[0] "%1 個已選的檔案"

#: kitemviews/kfileitemlisttostring.cpp:68
#, kde-format
msgctxt ""
"Textual representation of selected folders. %1 is the number of folders."
msgid "One Selected Folder"
msgid_plural "%1 Selected Folders"
msgstr[0] "%1 個已選的資料夾"

#: kitemviews/kfileitemlisttostring.cpp:71
#, kde-format
msgctxt ""
"Textual representation of selected fileitems. %1 is the number of files/"
"folders."
msgid "One Selected Item"
msgid_plural "%1 Selected Items"
msgstr[0] "%1 個已選的項目"

#: kitemviews/kfileitemlisttostring.cpp:82
#, kde-format
msgctxt "Textual representation of files. %1 is the number of files."
msgid "One File"
msgid_plural "%1 Files"
msgstr[0] "%1 個檔案"

#: kitemviews/kfileitemlisttostring.cpp:84
#, kde-format
msgctxt "Textual representation of folders. %1 is the number of folders."
msgid "One Folder"
msgid_plural "%1 Folders"
msgstr[0] "%1 個資料夾"

#: kitemviews/kfileitemlisttostring.cpp:86
#, kde-format
msgctxt ""
"Textual representation of fileitems. %1 is the number of files/folders."
msgid "One Item"
msgid_plural "%1 Items"
msgstr[0] "%1 個項目"

#: kitemviews/kfileitemlistwidget.cpp:74
#, kde-format
msgctxt "@item:intable"
msgid "%1 item"
msgid_plural "%1 items"
msgstr[0] "%1 個項目"

#: kitemviews/kfileitemlistwidget.cpp:100
#, kde-format
msgctxt "width × height"
msgid "%1 × %2"
msgstr "%1 × %2"

#: kitemviews/kfileitemmodel.cpp:2313
#, kde-format
msgctxt "@title:group Groups that start with a digit"
msgid "0 - 9"
msgstr "0 - 9"

#: kitemviews/kfileitemmodel.cpp:2315
#, kde-format
msgctxt "@title:group"
msgid "Others"
msgstr "其他"

#: kitemviews/kfileitemmodel.cpp:2347
#, kde-format
msgctxt "@title:group Size"
msgid "Folders"
msgstr "資料夾"

#: kitemviews/kfileitemmodel.cpp:2355
#, kde-format
msgctxt "@title:group Size"
msgid "Small"
msgstr "小"

#: kitemviews/kfileitemmodel.cpp:2357
#, kde-format
msgctxt "@title:group Size"
msgid "Medium"
msgstr "中"

#: kitemviews/kfileitemmodel.cpp:2359
#, kde-format
msgctxt "@title:group Size"
msgid "Big"
msgstr "大"

#: kitemviews/kfileitemmodel.cpp:2405
#, kde-format
msgctxt "@title:group Date"
msgid "Today"
msgstr "今天"

#: kitemviews/kfileitemmodel.cpp:2408
#, kde-format
msgctxt "@title:group Date"
msgid "Yesterday"
msgstr "昨天"

#: kitemviews/kfileitemmodel.cpp:2411
#, kde-format
msgctxt "@title:group Date: The week day name: dddd"
msgid "dddd"
msgstr "dddd"

#: kitemviews/kfileitemmodel.cpp:2415
#, kde-format
msgctxt ""
"Can be used to script translation of \"dddd\"with context @title:group Date"
msgid "%1"
msgstr "%1"

#: kitemviews/kfileitemmodel.cpp:2420
#, kde-format
msgctxt "@title:group Date"
msgid "One Week Ago"
msgstr "一週前"

#: kitemviews/kfileitemmodel.cpp:2423
#, kde-format
msgctxt "@title:group Date"
msgid "Two Weeks Ago"
msgstr "兩週前"

#: kitemviews/kfileitemmodel.cpp:2426
#, kde-format
msgctxt "@title:group Date"
msgid "Three Weeks Ago"
msgstr "三週前"

#: kitemviews/kfileitemmodel.cpp:2430
#, kde-format
msgctxt "@title:group Date"
msgid "Earlier this Month"
msgstr "這個月之前"

#: kitemviews/kfileitemmodel.cpp:2444
#, kde-format
msgctxt ""
"@title:group Date: MMMM is full month name in current locale, and yyyy is "
"full year number. You must keep the ' don't use any fancy \" or « or "
"similar. The ' is not shown to the user, it's there to mark a part of the "
"text that should not be formatted as a date"
msgid "'Yesterday' (MMMM, yyyy)"
msgstr "'昨天'（yyyy 年 MMMM）"

#: kitemviews/kfileitemmodel.cpp:2451
#, kde-format
msgctxt ""
"Can be used to script translation of \"'Yesterday' (MMMM, yyyy)\" with "
"context @title:group Date"
msgid "%1"
msgstr "%1"

#: kitemviews/kfileitemmodel.cpp:2464
#, kde-format
msgctxt ""
"@title:group Date: The week day name: dddd, MMMM is full month name in "
"current locale, and yyyy is full year number."
msgid "dddd (MMMM, yyyy)"
msgstr "dddd（yyyy 年 MMMM）"

#: kitemviews/kfileitemmodel.cpp:2468
#, kde-format
msgctxt ""
"Can be used to script translation of \"dddd (MMMM, yyyy)\" with context "
"@title:group Date"
msgid "%1"
msgstr "%1"

#: kitemviews/kfileitemmodel.cpp:2476
#, kde-format
msgctxt ""
"@title:group Date: MMMM is full month name in current locale, and yyyy is "
"full year number. You must keep the ' don't use any fancy \" or « or "
"similar. The ' is not shown to the user, it's there to mark a part of the "
"text that should not be formatted as a date"
msgid "'One Week Ago' (MMMM, yyyy)"
msgstr "'一週前'（yyyy 年 MMMM）"

#: kitemviews/kfileitemmodel.cpp:2483
#, kde-format
msgctxt ""
"Can be used to script translation of \"'One Week Ago' (MMMM, yyyy)\" with "
"context @title:group Date"
msgid "%1"
msgstr "%1"

#: kitemviews/kfileitemmodel.cpp:2497
#, kde-format
msgctxt ""
"@title:group Date: MMMM is full month name in current locale, and yyyy is "
"full year number. You must keep the ' don't use any fancy \" or « or "
"similar. The ' is not shown to the user, it's there to mark a part of the "
"text that should not be formatted as a date"
msgid "'Two Weeks Ago' (MMMM, yyyy)"
msgstr "'兩週前'（yyyy 年 MMMM）"

#: kitemviews/kfileitemmodel.cpp:2504
#, kde-format
msgctxt ""
"Can be used to script translation of \"'Two Weeks Ago' (MMMM, yyyy)\" with "
"context @title:group Date"
msgid "%1"
msgstr "%1"

#: kitemviews/kfileitemmodel.cpp:2518
#, kde-format
msgctxt ""
"@title:group Date: MMMM is full month name in current locale, and yyyy is "
"full year number. You must keep the ' don't use any fancy \" or « or "
"similar. The ' is not shown to the user, it's there to mark a part of the "
"text that should not be formatted as a date"
msgid "'Three Weeks Ago' (MMMM, yyyy)"
msgstr "'三週前'（yyyy 年 MMMM）"

#: kitemviews/kfileitemmodel.cpp:2525
#, kde-format
msgctxt ""
"Can be used to script translation of \"'Three Weeks Ago' (MMMM, yyyy)\" with "
"context @title:group Date"
msgid "%1"
msgstr "%1"

#: kitemviews/kfileitemmodel.cpp:2539
#, kde-format
msgctxt ""
"@title:group Date: MMMM is full month name in current locale, and yyyy is "
"full year number. You must keep the ' don't use any fancy \" or « or "
"similar. The ' is not shown to the user, it's there to mark a part of the "
"text that should not be formatted as a date"
msgid "'Earlier on' MMMM, yyyy"
msgstr "'稍早於' yyyy 年 MMMM"

#: kitemviews/kfileitemmodel.cpp:2546
#, kde-format
msgctxt ""
"Can be used to script translation of \"'Earlier on' MMMM, yyyy\" with "
"context @title:group Date"
msgid "%1"
msgstr "%1"

#: kitemviews/kfileitemmodel.cpp:2560
#, kde-format
msgctxt ""
"@title:group The month and year: MMMM is full month name in current locale, "
"and yyyy is full year number"
msgid "MMMM, yyyy"
msgstr "yyyy 年 MMMM"

#: kitemviews/kfileitemmodel.cpp:2564
#, kde-format
msgctxt ""
"Can be used to script translation of \"MMMM, yyyy\" with context @title:"
"group Date"
msgid "%1"
msgstr "%1"

#: kitemviews/kfileitemmodel.cpp:2604 kitemviews/kfileitemmodel.cpp:2617
#: kitemviews/kfileitemmodel.cpp:2630
#, kde-format
msgctxt "@item:intext Access permission, concatenated"
msgid "Read, "
msgstr "讀取，"

#: kitemviews/kfileitemmodel.cpp:2607 kitemviews/kfileitemmodel.cpp:2620
#: kitemviews/kfileitemmodel.cpp:2633
#, kde-format
msgctxt "@item:intext Access permission, concatenated"
msgid "Write, "
msgstr "寫入，"

#: kitemviews/kfileitemmodel.cpp:2610 kitemviews/kfileitemmodel.cpp:2623
#: kitemviews/kfileitemmodel.cpp:2636
#, kde-format
msgctxt "@item:intext Access permission, concatenated"
msgid "Execute, "
msgstr "執行，"

#: kitemviews/kfileitemmodel.cpp:2612 kitemviews/kfileitemmodel.cpp:2625
#: kitemviews/kfileitemmodel.cpp:2638
#, kde-format
msgctxt "@item:intext Access permission, concatenated"
msgid "Forbidden"
msgstr "拒絕"

#: kitemviews/kfileitemmodel.cpp:2640
#, kde-format
msgctxt "@title:group Files and folders by permissions"
msgid "User: %1 | Group: %2 | Others: %3"
msgstr "使用者：%1 | 群組：%2 | 其它：%3"

#: kitemviews/kfileitemmodel.cpp:2730
msgctxt "@label"
msgid "Name"
msgstr "名稱"

#: kitemviews/kfileitemmodel.cpp:2731
msgctxt "@label"
msgid "Size"
msgstr "大小"

#: kitemviews/kfileitemmodel.cpp:2732
msgctxt "@label"
msgid "Modified"
msgstr "已變更"

#: kitemviews/kfileitemmodel.cpp:2732 kitemviews/kfileitemmodel.cpp:2733
#: kitemviews/kfileitemmodel.cpp:2734
msgctxt "@tooltip"
msgid "The date format can be selected in settings."
msgstr "日期格式可以在設定裡選擇。"

#: kitemviews/kfileitemmodel.cpp:2733
msgctxt "@label"
msgid "Created"
msgstr "已建立"

#: kitemviews/kfileitemmodel.cpp:2734
msgctxt "@label"
msgid "Accessed"
msgstr "已存取"

#: kitemviews/kfileitemmodel.cpp:2735
msgctxt "@label"
msgid "Type"
msgstr "類型"

#: kitemviews/kfileitemmodel.cpp:2736
msgctxt "@label"
msgid "Rating"
msgstr "評分"

#: kitemviews/kfileitemmodel.cpp:2737
msgctxt "@label"
msgid "Tags"
msgstr "標籤"

#: kitemviews/kfileitemmodel.cpp:2738
msgctxt "@label"
msgid "Comment"
msgstr "註解"

#: kitemviews/kfileitemmodel.cpp:2739
msgctxt "@label"
msgid "Title"
msgstr "標題"

#: kitemviews/kfileitemmodel.cpp:2739 kitemviews/kfileitemmodel.cpp:2740
#: kitemviews/kfileitemmodel.cpp:2741 kitemviews/kfileitemmodel.cpp:2742
#: kitemviews/kfileitemmodel.cpp:2743 kitemviews/kfileitemmodel.cpp:2744
msgctxt "@label"
msgid "Document"
msgstr "文件"

#: kitemviews/kfileitemmodel.cpp:2740
msgctxt "@label"
msgid "Author"
msgstr " 作者"

#: kitemviews/kfileitemmodel.cpp:2741
msgctxt "@label"
msgid "Publisher"
msgstr "出版社"

#: kitemviews/kfileitemmodel.cpp:2742
msgctxt "@label"
msgid "Page Count"
msgstr "頁面數"

#: kitemviews/kfileitemmodel.cpp:2743
msgctxt "@label"
msgid "Word Count"
msgstr "字數"

#: kitemviews/kfileitemmodel.cpp:2744
msgctxt "@label"
msgid "Line Count"
msgstr "行數"

#: kitemviews/kfileitemmodel.cpp:2745
msgctxt "@label"
msgid "Date Photographed"
msgstr "照片日期"

#: kitemviews/kfileitemmodel.cpp:2745 kitemviews/kfileitemmodel.cpp:2746
#: kitemviews/kfileitemmodel.cpp:2747 kitemviews/kfileitemmodel.cpp:2748
#: kitemviews/kfileitemmodel.cpp:2749
msgctxt "@label"
msgid "Image"
msgstr "影像"

#: kitemviews/kfileitemmodel.cpp:2746
msgctxt "@label width x height"
msgid "Dimensions"
msgstr "尺寸"

#: kitemviews/kfileitemmodel.cpp:2747
msgctxt "@label"
msgid "Width"
msgstr "寬度"

#: kitemviews/kfileitemmodel.cpp:2748
msgctxt "@label"
msgid "Height"
msgstr "高度"

#: kitemviews/kfileitemmodel.cpp:2749
msgctxt "@label"
msgid "Orientation"
msgstr "方向"

#: kitemviews/kfileitemmodel.cpp:2750
msgctxt "@label"
msgid "Artist"
msgstr "演出者"

#: kitemviews/kfileitemmodel.cpp:2750 kitemviews/kfileitemmodel.cpp:2751
#: kitemviews/kfileitemmodel.cpp:2752 kitemviews/kfileitemmodel.cpp:2753
#: kitemviews/kfileitemmodel.cpp:2754 kitemviews/kfileitemmodel.cpp:2755
#: kitemviews/kfileitemmodel.cpp:2756
msgctxt "@label"
msgid "Audio"
msgstr "音效"

#: kitemviews/kfileitemmodel.cpp:2751
msgctxt "@label"
msgid "Genre"
msgstr "風格"

#: kitemviews/kfileitemmodel.cpp:2752
msgctxt "@label"
msgid "Album"
msgstr "專輯"

#: kitemviews/kfileitemmodel.cpp:2753
msgctxt "@label"
msgid "Duration"
msgstr "期間"

#: kitemviews/kfileitemmodel.cpp:2754
msgctxt "@label"
msgid "Bitrate"
msgstr "位元率"

#: kitemviews/kfileitemmodel.cpp:2755
msgctxt "@label"
msgid "Track"
msgstr "音軌"

#: kitemviews/kfileitemmodel.cpp:2756
msgctxt "@label"
msgid "Release Year"
msgstr "發行年份"

#: kitemviews/kfileitemmodel.cpp:2757
msgctxt "@label"
msgid "Aspect Ratio"
msgstr "外觀比例"

#: kitemviews/kfileitemmodel.cpp:2757 kitemviews/kfileitemmodel.cpp:2758
msgctxt "@label"
msgid "Video"
msgstr "影片"

#: kitemviews/kfileitemmodel.cpp:2758
msgctxt "@label"
msgid "Frame Rate"
msgstr "影格速率"

#: kitemviews/kfileitemmodel.cpp:2759
msgctxt "@label"
msgid "Path"
msgstr "路徑"

#: kitemviews/kfileitemmodel.cpp:2759 kitemviews/kfileitemmodel.cpp:2760
#: kitemviews/kfileitemmodel.cpp:2761 kitemviews/kfileitemmodel.cpp:2762
#: kitemviews/kfileitemmodel.cpp:2763 kitemviews/kfileitemmodel.cpp:2764
#: kitemviews/kfileitemmodel.cpp:2765 kitemviews/kfileitemmodel.cpp:2766
msgctxt "@label"
msgid "Other"
msgstr "其他"

#: kitemviews/kfileitemmodel.cpp:2760
msgctxt "@label"
msgid "File Extension"
msgstr "檔案副檔名："

#: kitemviews/kfileitemmodel.cpp:2761
msgctxt "@label"
msgid "Deletion Time"
msgstr "刪除時間"

#: kitemviews/kfileitemmodel.cpp:2762
msgctxt "@label"
msgid "Link Destination"
msgstr "連結目的"

#: kitemviews/kfileitemmodel.cpp:2763
msgctxt "@label"
msgid "Downloaded From"
msgstr "已下載從"

#: kitemviews/kfileitemmodel.cpp:2764
msgctxt "@label"
msgid "Permissions"
msgstr "權限"

#: kitemviews/kfileitemmodel.cpp:2764
msgctxt "@tooltip"
msgid ""
"The permission format can be changed in settings. Options are Symbolic, "
"Numeric (Octal) or Combined formats"
msgstr "權限格式可以在設定裡修改。可用的格式選項有符號、數字（八進制）或合併。"

#: kitemviews/kfileitemmodel.cpp:2765
msgctxt "@label"
msgid "Owner"
msgstr "擁有者"

#: kitemviews/kfileitemmodel.cpp:2766
msgctxt "@label"
msgid "User Group"
msgstr "使用者群組"

#: kitemviews/kfileitemmodel.cpp:2867
#, kde-format
msgctxt "@info:status"
msgid "Unknown error."
msgstr "未知的錯誤。"

#: main.cpp:61
#, kde-kuit-format
msgctxt "@info:shell %1 is a terminal command"
msgid ""
"Running <application>Dolphin</application> with <command>sudo</command> is "
"discouraged. Please run <icode>%1</icode> instead."
msgstr ""
"不建議利用 <command>sudo</command> 執行 <application>Dolphin</application>。"
"請改執行 <icode>%1</icode>。"

#: main.cpp:97
#, kde-format
msgid "Dolphin"
msgstr "Dolphin"

#: main.cpp:99
#, kde-format
msgctxt "@title"
msgid "File Manager"
msgstr "檔案管理員"

#: main.cpp:101
#, kde-format
msgctxt "@info:credit"
msgid "(C) 2006-2022 The Dolphin Developers"
msgstr "(C) 2006-2022 Dolphin 開發團隊"

#: main.cpp:103
#, kde-format
msgctxt "@info:credit"
msgid "Felix Ernst"
msgstr "Felix Ernst"

#: main.cpp:104
#, kde-format
msgctxt "@info:credit"
msgid "Maintainer (since 2021) and developer"
msgstr "維護者 (2021 年起) 和開發者"

#: main.cpp:106
#, kde-format
msgctxt "@info:credit"
msgid "Méven Car"
msgstr "Méven Car"

#: main.cpp:107
#, kde-format
msgctxt "@info:credit"
msgid "Maintainer (since 2021) and developer (since 2019)"
msgstr "維護者 (2021 年起) 和開發者 (2019 年起)"

#: main.cpp:109
#, kde-format
msgctxt "@info:credit"
msgid "Elvis Angelaccio"
msgstr "Elvis Angelaccio"

#: main.cpp:110
#, kde-format
msgctxt "@info:credit"
msgid "Maintainer (2018-2021) and developer"
msgstr "維護者 (2018-2021) 和開發者"

#: main.cpp:112
#, kde-format
msgctxt "@info:credit"
msgid "Emmanuel Pescosta"
msgstr "Emmanuel Pescosta"

#: main.cpp:113
#, kde-format
msgctxt "@info:credit"
msgid "Maintainer (2014-2018) and developer"
msgstr "維護者 (2014-2018) 和開發者"

#: main.cpp:115
#, kde-format
msgctxt "@info:credit"
msgid "Frank Reininghaus"
msgstr "Frank Reininghaus"

#: main.cpp:116
#, kde-format
msgctxt "@info:credit"
msgid "Maintainer (2012-2014) and developer"
msgstr "維護者 (2012-2014) 和開發者"

#: main.cpp:118
#, kde-format
msgctxt "@info:credit"
msgid "Peter Penz"
msgstr "Peter Penz"

#: main.cpp:119
#, kde-format
msgctxt "@info:credit"
msgid "Maintainer and developer (2006-2012)"
msgstr "維護者和發展者 (2006-2012)"

#: main.cpp:121
#, kde-format
msgctxt "@info:credit"
msgid "Sebastian Trüg"
msgstr "Sebastian Trüg"

#: main.cpp:121 main.cpp:122 main.cpp:123 main.cpp:124 main.cpp:125
#: main.cpp:126 main.cpp:127
#, kde-format
msgctxt "@info:credit"
msgid "Developer"
msgstr "開發者"

#: main.cpp:122
#, kde-format
msgctxt "@info:credit"
msgid "David Faure"
msgstr "David Faure"

#: main.cpp:123
#, kde-format
msgctxt "@info:credit"
msgid "Aaron J. Seigo"
msgstr "Aaron J. Seigo"

#: main.cpp:124
#, kde-format
msgctxt "@info:credit"
msgid "Rafael Fernández López"
msgstr "Rafael Fernández López"

#: main.cpp:125
#, kde-format
msgctxt "@info:credit"
msgid "Kevin Ottens"
msgstr "Kevin Ottens"

#: main.cpp:126
#, kde-format
msgctxt "@info:credit"
msgid "Holger Freyther"
msgstr "Holger Freyther"

#: main.cpp:127
#, kde-format
msgctxt "@info:credit"
msgid "Max Blazejak"
msgstr "Max Blazejak"

#: main.cpp:128
#, kde-format
msgctxt "@info:credit"
msgid "Michael Austin"
msgstr "Michael Austin"

#: main.cpp:128
#, kde-format
msgctxt "@info:credit"
msgid "Documentation"
msgstr "文件"

#: main.cpp:139
#, kde-format
msgctxt "@info:shell"
msgid "The files and folders passed as arguments will be selected."
msgstr "做為參數傳遞的檔案與目錄將被選取。"

#: main.cpp:141
#, kde-format
msgctxt "@info:shell"
msgid "Dolphin will get started with a split view."
msgstr "Dolphin 會以分割檢視模式啟動。"

#: main.cpp:142
#, kde-format
msgctxt "@info:shell"
msgid "Dolphin will explicitly open in a new window."
msgstr "Dolphin 將確實在新視窗開啟。"

#: main.cpp:144
#, kde-format
msgctxt "@info:shell"
msgid "Set up Dolphin for administrative tasks."
msgstr "設定 Dolphin 以進行管理員動作。"

#: main.cpp:146
#, kde-format
msgctxt "@info:shell"
msgid "Start Dolphin Daemon (only required for DBus Interface)."
msgstr "啟動 Dolphin 守護程式（只有 DBus 介面需要）。"

#: main.cpp:147
#, kde-format
msgctxt "@info:shell"
msgid "Document to open"
msgstr "要開啟的文件"

#. i18n: ectx: label, entry (HiddenFilesShown), group (FoldersPanel)
#: panels/folders/dolphin_folderspanelsettings.kcfg:10
#, kde-format
msgid "Hidden files shown"
msgstr "已顯示隱藏檔案"

#. i18n: ectx: label, entry (LimitFoldersPanelToHome), group (FoldersPanel)
#: panels/folders/dolphin_folderspanelsettings.kcfg:14
#, kde-format
msgid "Limit folders panel to home directory if inside home"
msgstr "若位於家目錄內，則資料夾面板只顯示到家目錄"

#. i18n: ectx: label, entry (AutoScrolling), group (FoldersPanel)
#: panels/folders/dolphin_folderspanelsettings.kcfg:18
#, kde-format
msgid "Automatic scrolling"
msgstr "自動捲軸"

#: panels/folders/treeviewcontextmenu.cpp:50
#, kde-format
msgctxt "@action:inmenu"
msgid "Cut"
msgstr "剪下"

#: panels/folders/treeviewcontextmenu.cpp:54
#, kde-format
msgctxt "@action:inmenu"
msgid "Copy"
msgstr "複製"

#: panels/folders/treeviewcontextmenu.cpp:70
#, kde-format
msgctxt "@action:inmenu"
msgid "Rename…"
msgstr "重新命名…"

#: panels/folders/treeviewcontextmenu.cpp:83
#, kde-format
msgctxt "@action:inmenu"
msgid "Move to Trash"
msgstr "移到垃圾桶"

#: panels/folders/treeviewcontextmenu.cpp:93
#, kde-format
msgctxt "@action:inmenu"
msgid "Delete"
msgstr "刪除"

#: panels/folders/treeviewcontextmenu.cpp:103
#, kde-format
msgctxt "@action:inmenu"
msgid "Show Hidden Files"
msgstr "顯示隱藏檔案"

#: panels/folders/treeviewcontextmenu.cpp:113
#, kde-format
msgctxt "@action:inmenu"
msgid "Limit to Home Directory"
msgstr "限制於家目錄"

#: panels/folders/treeviewcontextmenu.cpp:122
#, kde-format
msgctxt "@action:inmenu"
msgid "Automatic Scrolling"
msgstr "自動捲軸"

#: panels/folders/treeviewcontextmenu.cpp:132
#, kde-format
msgctxt "@action:inmenu"
msgid "Properties"
msgstr "屬性"

#. i18n: ectx: label, entry (previewsShown), group (InformationPanel)
#: panels/information/dolphin_informationpanelsettings.kcfg:10
#, kde-format
msgid "Previews shown"
msgstr "已顯示預覽"

#. i18n: ectx: label, entry (previewsAutoPlay), group (InformationPanel)
#: panels/information/dolphin_informationpanelsettings.kcfg:14
#, kde-format
msgid "Auto-Play media files"
msgstr "自動播放媒體檔案"

#. i18n: ectx: label, entry (showHovered), group (InformationPanel)
#: panels/information/dolphin_informationpanelsettings.kcfg:18
#, kde-format
msgid "Show item on hover"
msgstr "游標停留時顯示項目"

#. i18n: ectx: label, entry (dateFormat), group (InformationPanel)
#: panels/information/dolphin_informationpanelsettings.kcfg:22
#, kde-format
msgid "Date display format"
msgstr "日期顯示格式"

#: panels/information/informationpanel.cpp:153
#, kde-format
msgctxt "@action:inmenu"
msgid "Preview"
msgstr "預覽"

#: panels/information/informationpanel.cpp:158
#, kde-format
msgctxt "@action:inmenu"
msgid "Auto-Play media files"
msgstr "自動播放媒體檔案"

#: panels/information/informationpanel.cpp:163
#, kde-format
msgctxt "@action:inmenu"
msgid "Show item on hover"
msgstr "游標停留時顯示項目"

#: panels/information/informationpanel.cpp:168
#, kde-format
msgctxt "@action:inmenu"
msgid "Configure…"
msgstr "設定…"

#: panels/information/informationpanel.cpp:174
#, kde-format
msgctxt "@action:inmenu"
msgid "Condensed Date"
msgstr "簡明日期"

#: panels/information/informationpanelcontent.cpp:106
#, kde-format
msgctxt "@label::textbox"
msgid "Select which data should be shown:"
msgstr "選擇哪些資料要被顯示出來："

#: panels/information/informationpanelcontent.cpp:286
#, kde-format
msgctxt "@label"
msgid "%1 item selected"
msgid_plural "%1 items selected"
msgstr[0] "已選擇 %1 個項目"

#: panels/information/phononwidget.cpp:153
#, kde-format
msgid "play"
msgstr "播放"

#: panels/information/phononwidget.cpp:159
#, kde-format
msgid "pause"
msgstr "暫停"

#. i18n: ectx: label, entry (IconSize), group (PlacesPanel)
#: panels/places/dolphin_placespanelsettings.kcfg:11
#, kde-format
msgid "Size of icons in the Places Panel (-1 means \"automatic\")"
msgstr "書籤面板裡的圖示大小（-1 表示「自動」）"

#: panels/places/placespanel.cpp:53
#, kde-format
msgctxt "@action:inmenu"
msgid "Configure Trash…"
msgstr "設定垃圾桶…"

#: panels/terminal/terminalpanel.cpp:185
#, kde-format
msgid ""
"Terminal cannot be shown because Konsole is not installed. Please install it "
"and then reopen the panel."
msgstr ""
"因為 Konsole 尚未安裝，所以終端機無法顯示。請安裝它，再重新開啟這個面板。"

#: panels/terminal/terminalpanel.cpp:192
#, kde-format
msgid "Install Konsole"
msgstr "安裝 Konsole"

#. i18n: ectx: label, entry (Location), group (Search)
#: search/dolphin_searchsettings.kcfg:10
#, kde-format
msgid "Location"
msgstr "位置"

#. i18n: ectx: label, entry (What), group (Search)
#: search/dolphin_searchsettings.kcfg:14
#, kde-format
msgid "What"
msgstr "什麼"

#: search/dolphinfacetswidget.cpp:29
#, kde-format
msgctxt "@item:inlistbox"
msgid "Any Type"
msgstr "任何類型"

#: search/dolphinfacetswidget.cpp:30
#, kde-format
msgctxt "@item:inlistbox"
msgid "Folders"
msgstr "資料夾"

#: search/dolphinfacetswidget.cpp:31
#, kde-format
msgctxt "@item:inlistbox"
msgid "Documents"
msgstr "文件"

#: search/dolphinfacetswidget.cpp:32
#, kde-format
msgctxt "@item:inlistbox"
msgid "Images"
msgstr "影像"

#: search/dolphinfacetswidget.cpp:33
#, kde-format
msgctxt "@item:inlistbox"
msgid "Audio Files"
msgstr "音訊檔案"

#: search/dolphinfacetswidget.cpp:34
#, kde-format
msgctxt "@item:inlistbox"
msgid "Videos"
msgstr "影片"

#: search/dolphinfacetswidget.cpp:40
#, kde-format
msgctxt "@item:inlistbox"
msgid "Any Date"
msgstr "任何日期"

#: search/dolphinfacetswidget.cpp:41
#, kde-format
msgctxt "@item:inlistbox"
msgid "Today"
msgstr "今天"

#: search/dolphinfacetswidget.cpp:42
#, kde-format
msgctxt "@item:inlistbox"
msgid "Yesterday"
msgstr "昨天"

#: search/dolphinfacetswidget.cpp:44
#, kde-format
msgctxt "@item:inlistbox"
msgid "This Week"
msgstr "本週"

#: search/dolphinfacetswidget.cpp:47
#, kde-format
msgctxt "@item:inlistbox"
msgid "This Month"
msgstr "本月"

#: search/dolphinfacetswidget.cpp:50
#, kde-format
msgctxt "@item:inlistbox"
msgid "This Year"
msgstr "今年"

#: search/dolphinfacetswidget.cpp:55
#, kde-format
msgctxt "@item:inlistbox"
msgid "Any Rating"
msgstr "任何評分"

#: search/dolphinfacetswidget.cpp:56
#, kde-format
msgctxt "@item:inlistbox"
msgid "1 or more"
msgstr "一星以上"

#: search/dolphinfacetswidget.cpp:57
#, kde-format
msgctxt "@item:inlistbox"
msgid "2 or more"
msgstr "兩星以上"

#: search/dolphinfacetswidget.cpp:58
#, kde-format
msgctxt "@item:inlistbox"
msgid "3 or more"
msgstr "三星以上"

#: search/dolphinfacetswidget.cpp:59
#, kde-format
msgctxt "@item:inlistbox"
msgid "4 or more"
msgstr "四星以上"

#: search/dolphinfacetswidget.cpp:60
#, kde-format
msgctxt "@item:inlistbox"
msgid "Highest Rating"
msgstr "最高評分"

#: search/dolphinfacetswidget.cpp:63
#, kde-format
msgctxt "@action:inmenu"
msgid "Clear Selection"
msgstr "清除選取"

#: search/dolphinfacetswidget.cpp:253
#, kde-format
msgctxt "String list separator"
msgid ", "
msgstr "、"

#: search/dolphinfacetswidget.cpp:254
#, kde-format
msgctxt "@action:button %2 is a list of tags"
msgid "Tag: %2"
msgid_plural "Tags: %2"
msgstr[0] "標籤：%2"

#: search/dolphinfacetswidget.cpp:256
#, kde-format
msgctxt "@action:button"
msgid "Add Tags"
msgstr "新增標籤"

#: search/dolphinsearchbox.cpp:104
#, kde-format
msgctxt "action:button"
msgid "From Here (%1)"
msgstr "從這裡（%1）"

#: search/dolphinsearchbox.cpp:105
#, kde-format
msgctxt "action:button"
msgid "Limit search to '%1' and its subfolders"
msgstr "將搜尋限制至「%1」與其子目錄"

#: search/dolphinsearchbox.cpp:361
#, kde-format
msgctxt "action:button"
msgid "Save this search to quickly access it again in the future"
msgstr "儲存此搜尋條件以供將來快速尋找"

#: search/dolphinsearchbox.cpp:370
#, kde-format
msgctxt "@info:tooltip"
msgid "Quit searching"
msgstr "離開搜尋"

#: search/dolphinsearchbox.cpp:381
#, kde-format
msgctxt "action:button"
msgid "Filename"
msgstr "檔案名稱"

#: search/dolphinsearchbox.cpp:385
#, kde-format
msgctxt "action:button"
msgid "Content"
msgstr "內容"

#: search/dolphinsearchbox.cpp:396
#, kde-format
msgctxt "action:button"
msgid "From Here"
msgstr "從這裡"

#: search/dolphinsearchbox.cpp:400
#, kde-format
msgctxt "action:button"
msgid "Your files"
msgstr "您的檔案"

#: search/dolphinsearchbox.cpp:401
#, kde-format
msgctxt "action:button"
msgid "Search in your home directory"
msgstr "在家目錄中搜尋"

#: search/dolphinsearchbox.cpp:419
#, kde-format
msgid "Open %1"
msgstr "開啟 %1"

#: search/dolphinsearchbox.cpp:485
#, kde-format
msgctxt ""
"@title UDS_DISPLAY_NAME for a KIO directory listing. %1 is the query the "
"user entered."
msgid "Query Results from '%1'"
msgstr "從 %1 得到的查詢結果"

#: selectionmode/bottombarcontentscontainer.cpp:155
#, kde-format
msgctxt "@info explaining the next step in a process"
msgid "Select the files and folders that should be copied."
msgstr "選取要複製的檔案與資料夾。"

#. i18n: Aborts the current step-by-step process to copy files by leaving the selection mode.
#. i18n: Aborts the current step-by-step process to copy the location of files by leaving the selection mode.
#: selectionmode/bottombarcontentscontainer.cpp:162
#: selectionmode/bottombarcontentscontainer.cpp:197
#: selectionmode/bottombarcontentscontainer.cpp:220
#, kde-format
msgctxt "@action:button"
msgid "Cancel Copying"
msgstr "取消複製"

#: selectionmode/bottombarcontentscontainer.cpp:190
#, kde-format
msgctxt "@info explaining the next step in a process"
msgid "Select one file or folder whose location should be copied."
msgstr "選取要一個複製位置的檔案或資料夾。"

#. i18n: "Copy over" refers to copying to the other split view area that is currently visible to the user.
#: selectionmode/bottombarcontentscontainer.cpp:212
#, kde-format
msgctxt "@info explaining the next step in a process"
msgid "Select the files and folders that should be copied over."
msgstr "選取要複製過去的檔案與資料夾。"

#: selectionmode/bottombarcontentscontainer.cpp:233
#, kde-format
msgctxt "@info explaining the next step in a process"
msgid "Select the files and folders that should be cut."
msgstr "選取要剪下的檔案與資料夾。"

#. i18n: Aborts the current step-by-step process to cut files by leaving the selection mode.
#: selectionmode/bottombarcontentscontainer.cpp:240
#, kde-format
msgctxt "@action:button"
msgid "Cancel Cutting"
msgstr "取消剪下"

#: selectionmode/bottombarcontentscontainer.cpp:269
#, kde-format
msgctxt "@info explaining the next step in a process"
msgid "Select the files and folders that should be permanently deleted."
msgstr "選取要永久刪除的檔案與資料夾。"

#. i18n: Aborts the current step-by-step process to delete files by leaving the selection mode.
#. i18n: Aborts the current step-by-step process of moving files to the trash by leaving the selection mode.
#: selectionmode/bottombarcontentscontainer.cpp:276
#: selectionmode/bottombarcontentscontainer.cpp:388
#, kde-format
msgctxt "@action:button"
msgid "Cancel"
msgstr "取消"

#: selectionmode/bottombarcontentscontainer.cpp:289
#, kde-format
msgctxt "@info explaining the next step in a process"
msgid "Select the files and folders that should be duplicated here."
msgstr "選取要在此建立複本的檔案與資料夾。"

#. i18n: Aborts the current step-by-step process to duplicate files by leaving the selection mode.
#: selectionmode/bottombarcontentscontainer.cpp:296
#, kde-format
msgctxt "@action:button"
msgid "Cancel Duplicating"
msgstr "取消建立複本"

#. i18n: This button appears in a bar if there isn't enough horizontal space to fit all the other buttons so please keep it short.
#. The small button opens a menu that contains the actions that didn't fit on the bar.
#: selectionmode/bottombarcontentscontainer.cpp:313
#, kde-format
msgctxt "@action keep short"
msgid "More"
msgstr "更多"

#. i18n: "Move over" refers to moving to the other split view area that is currently visible to the user.
#: selectionmode/bottombarcontentscontainer.cpp:359
#, kde-format
msgctxt "@info explaining the next step in a process"
msgid "Select the files and folders that should be moved over."
msgstr "選取要移動過去的檔案與資料夾。"

#. i18n: Aborts the current step-by-step process to copy the location of files by leaving the selection mode.
#: selectionmode/bottombarcontentscontainer.cpp:367
#, kde-format
msgctxt "@action:button"
msgid "Cancel Moving"
msgstr "取消移動"

#: selectionmode/bottombarcontentscontainer.cpp:381
#, kde-format
msgctxt "@info explaining the next step in a process"
msgid "Select the files and folders that should be moved to the Trash."
msgstr "選取要移到垃圾桶的檔案與資料夾。"

#: selectionmode/bottombarcontentscontainer.cpp:401
#, kde-kuit-format
msgid ""
"<para>The selected files and folders were added to the Clipboard. Now the "
"<emphasis>Paste</emphasis> action can be used to transfer them from the "
"Clipboard to any other location. They can even be transferred to other "
"applications by using their respective <emphasis>Paste</emphasis> actions.</"
"para>"
msgstr ""
"<para>所選檔案與資料夾已加到「剪貼簿」中。現在可以使用<emphasis>貼上</"
"emphasis>動作來將它們從剪貼簿傳輸到其他任何位置。它們甚至可以被傳輸到別的應用"
"程式去，只要使用該應用程式的<emphasis>貼上</emphasis>動作即可。</para>"

#: selectionmode/bottombarcontentscontainer.cpp:422
#, kde-format
msgctxt ""
"@action A more elaborate and clearly worded version of the Paste action"
msgid "Paste from Clipboard"
msgstr "從剪貼簿貼上"

#: selectionmode/bottombarcontentscontainer.cpp:427
#, kde-format
msgctxt "@action Dismisses a bar explaining how to use the Paste action"
msgid "Dismiss This Reminder"
msgstr "忽略這個提醒"

#: selectionmode/bottombarcontentscontainer.cpp:429
#, kde-format
msgctxt "@action Dismisses an explanatory area and never shows it again"
msgid "Don't Remind Me Again"
msgstr "不要再提醒我"

#: selectionmode/bottombarcontentscontainer.cpp:446
#, kde-format
msgctxt "@info explains the next step in a process"
msgid ""
"Select the file or folder that should be renamed.\n"
"Bulk renaming is possible when multiple items are selected."
msgstr ""
"選取要重新命名的檔案或資料夾。\n"
"選取多個項目時可以進行大量重新命名。"

#. i18n: Aborts the current step-by-step process to delete files by leaving the selection mode.
#: selectionmode/bottombarcontentscontainer.cpp:454
#, kde-format
msgctxt "@action:button"
msgid "Cancel Renaming"
msgstr "取消重新命名"

#. i18n: A more elaborate and clearly worded version of the Copy action
#. %2 is a textual representation of the currently selected files or folders. This can be the name of
#. the file/files like "file1" or "file1, file2 and file3" or an aggregate like "8 Selected Folders".
#. If this sort of word puzzle can not be correctly translated in your language, translate it as "NULL" (without the quotes)
#. and a fallback will be used.
#: selectionmode/bottombarcontentscontainer.cpp:601
#, kde-format
msgctxt "@action"
msgid "Copy %2 to the Clipboard"
msgid_plural "Copy %2 to the Clipboard"
msgstr[0] "複製 %2 到剪貼簿"

#. i18n: A more elaborate and clearly worded version of the Copy Location action
#. %2 is a textual representation of the currently selected files or folders. This can be the name of
#. the file/files like "file1" or "file1, file2 and file3" or an aggregate like "8 Selected Folders".
#. If this sort of word puzzle can not be correctly translated in your language, translate it as "NULL" (without the quotes)
#. and a fallback will be used.
#: selectionmode/bottombarcontentscontainer.cpp:612
#, kde-format
msgctxt "@action"
msgid "Copy the Location of %2 to the Clipboard"
msgid_plural "Copy the Location of %2 to the Clipboard"
msgstr[0] "複製 %2 的位置到剪貼簿"

#. i18n: A more elaborate and clearly worded version of the Cut action
#. %2 is a textual representation of the currently selected files or folders. This can be the name of
#. the file/files like "file1" or "file1, file2 and file3" or an aggregate like "8 Selected Folders".
#. If this sort of word puzzle can not be correctly translated in your language, translate it as "NULL" (without the quotes)
#. and a fallback will be used.
#: selectionmode/bottombarcontentscontainer.cpp:620
#, kde-format
msgctxt "@action"
msgid "Cut %2 to the Clipboard"
msgid_plural "Cut %2 to the Clipboard"
msgstr[0] "剪下 %2 到剪貼簿"

#. i18n: A more elaborate and clearly worded version of the Delete action
#. %2 is a textual representation of the currently selected files or folders. This can be the name of
#. the file/files like "file1" or "file1, file2 and file3" or an aggregate like "8 Selected Folders".
#. If this sort of word puzzle can not be correctly translated in your language, translate it as "NULL" (without the quotes)
#. and a fallback will be used.
#: selectionmode/bottombarcontentscontainer.cpp:628
#, kde-format
msgctxt "@action"
msgid "Permanently Delete %2"
msgid_plural "Permanently Delete %2"
msgstr[0] "永久刪除 %2"

#. i18n: A more elaborate and clearly worded version of the Duplicate action
#. %2 is a textual representation of the currently selected files or folders. This can be the name of
#. the file/files like "file1" or "file1, file2 and file3" or an aggregate like "8 Selected Folders".
#. If this sort of word puzzle can not be correctly translated in your language, translate it as "NULL" (without the quotes)
#. and a fallback will be used.
#: selectionmode/bottombarcontentscontainer.cpp:636
#, kde-format
msgctxt "@action"
msgid "Duplicate %2"
msgid_plural "Duplicate %2"
msgstr[0] "建立 %2 的複本"

#. i18n: A more elaborate and clearly worded version of the Trash action
#. %2 is a textual representation of the currently selected files or folders. This can be the name of
#. the file/files like "file1" or "file1, file2 and file3" or an aggregate like "8 Selected Folders".
#. If this sort of word puzzle can not be correctly translated in your language, translate it as "NULL" (without the quotes)
#. and a fallback will be used.
#: selectionmode/bottombarcontentscontainer.cpp:644
#, kde-format
msgctxt "@action"
msgid "Move %2 to the Trash"
msgid_plural "Move %2 to the Trash"
msgstr[0] "將 %2 移到垃圾桶"

#. i18n: A more elaborate and clearly worded version of the Rename action
#. %2 is a textual representation of the currently selected files or folders. This can be the name of
#. the file/files like "file1" or "file1, file2 and file3" or an aggregate like "8 Selected Folders".
#. If this sort of word puzzle can not be correctly translated in your language, translate it as "NULL" (without the quotes)
#. and a fallback will be used.
#: selectionmode/bottombarcontentscontainer.cpp:652
#, kde-format
msgctxt "@action"
msgid "Rename %2"
msgid_plural "Rename %2"
msgstr[0] "重新命名 %2"

#: selectionmode/topbar.cpp:28
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<title>Selection Mode</title><para>Select files or folders to manage or "
"manipulate them.<list><item>Press on a file or folder to select it.</"
"item><item>Press on an already selected file or folder to deselect it.</"
"item><item>Pressing an empty area does <emphasis>not</emphasis> clear the "
"selection.</item><item>Selection rectangles (created by dragging from an "
"empty area) invert the selection status of items within.</item></list></"
"para><para>The available action buttons at the bottom change depending on "
"the current selection.</para>"
msgstr ""
"<title>選取模式</title><para>選取檔案或資料夾來管理或操控它們。<list><item>點"
"擊檔案或資料夾來選取它。</item><item>點擊已選取的檔案或資料夾來取消選取它。</"
"item><item>點擊空白區域<emphasis>不會</emphasis>清除選取。</item><item>選取矩"
"形（從空白區域拖曳時會出現的）會反轉範圍內的項目的選取狀態。</item></list></"
"para><para>下方可用的動作按鈕會依目前選取項目改變。</para>"

#: selectionmode/topbar.cpp:38
#, kde-format
msgctxt "@info label above the view explaining the state"
msgid "Selection Mode: Click on files or folders to select or deselect them."
msgstr "選取模式：點擊檔案或資料夾來選取它們或取消選取。"

#: selectionmode/topbar.cpp:39
#, kde-format
msgctxt "@info label above the view explaining the state"
msgid "Selection Mode"
msgstr "選取模式"

#: selectionmode/topbar.cpp:45
#, kde-format
msgctxt "@action:button"
msgid "Exit Selection Mode"
msgstr "離開選取模式"

#: settings/contextmenu/contextmenusettingspage.cpp:59
#, kde-format
msgctxt "@label:textbox"
msgid "Select which services should be shown in the context menu:"
msgstr "選擇內文選單中要顯示哪些服務："

#: settings/contextmenu/contextmenusettingspage.cpp:64
#, kde-format
msgctxt "@label:textbox"
msgid "Search…"
msgstr "搜尋…"

#: settings/contextmenu/contextmenusettingspage.cpp:89
#, kde-format
msgctxt "@action:button"
msgid "Download New Services…"
msgstr "下載新的服務…"

#: settings/contextmenu/contextmenusettingspage.cpp:208
#, kde-format
msgctxt "@info"
msgid ""
"Dolphin must be restarted to apply the updated version control system "
"settings."
msgstr "Dolphin 必須重新啟動來套用更改後的版本控制系統設定。"

#: settings/contextmenu/contextmenusettingspage.cpp:210
#, kde-format
msgctxt "@info"
msgid "Restart now?"
msgstr "立刻重新啟動？"

#: settings/contextmenu/contextmenusettingspage.cpp:245
#, kde-format
msgctxt "@option:check"
msgid "Delete"
msgstr "刪除"

#: settings/contextmenu/contextmenusettingspage.cpp:249
#, kde-format
msgctxt "@option:check"
msgid "'Copy To' and 'Move To' commands"
msgstr "「複製到」與「移動到」命令"

#: settings/contextmenu/contextmenusettingspage.cpp:290
#, kde-format
msgctxt "@item:inmenu"
msgid "%1: %2"
msgstr "%1: %2"

#. i18n: ectx: label, entry (UseSystemFont), group (IconsMode)
#. i18n: ectx: label, entry (UseSystemFont), group (DetailsMode)
#. i18n: ectx: label, entry (UseSystemFont), group (CompactMode)
#: settings/dolphin_compactmodesettings.kcfg:12
#: settings/dolphin_detailsmodesettings.kcfg:15
#: settings/dolphin_iconsmodesettings.kcfg:12
#, kde-format
msgid "Use system font"
msgstr "使用系統字型"

#. i18n: ectx: label, entry (IconSize), group (IconsMode)
#. i18n: ectx: label, entry (IconSize), group (DetailsMode)
#. i18n: ectx: label, entry (IconSize), group (CompactMode)
#: settings/dolphin_compactmodesettings.kcfg:19
#: settings/dolphin_detailsmodesettings.kcfg:19
#: settings/dolphin_iconsmodesettings.kcfg:19
#, kde-format
msgid "Icon size"
msgstr "圖示大小"

#. i18n: ectx: label, entry (PreviewSize), group (IconsMode)
#. i18n: ectx: label, entry (PreviewSize), group (DetailsMode)
#. i18n: ectx: label, entry (PreviewSize), group (CompactMode)
#: settings/dolphin_compactmodesettings.kcfg:23
#: settings/dolphin_detailsmodesettings.kcfg:23
#: settings/dolphin_iconsmodesettings.kcfg:23
#, kde-format
msgid "Preview size"
msgstr "預覽大小"

#. i18n: ectx: label, entry (MaximumTextWidthIndex), group (CompactMode)
#: settings/dolphin_compactmodesettings.kcfg:27
#, kde-format
msgid "Maximum text width index (0 means unlimited)"
msgstr "最大文字寬度索引（0 表示不限制）"

#. i18n: ectx: label, entry (DirectorySizeMode), group (ContentDisplay)
#: settings/dolphin_contentdisplaysettings.kcfg:10
#, kde-format
msgid "How we display the size of directories"
msgstr "如何顯示目錄大小"

#. i18n: ectx: label, entry (DirectorySizeMode), group (ContentDisplay)
#: settings/dolphin_contentdisplaysettings.kcfg:13
#, kde-format
msgid "Show the content count"
msgstr "顯示內容數量"

#. i18n: ectx: label, entry (DirectorySizeMode), group (ContentDisplay)
#: settings/dolphin_contentdisplaysettings.kcfg:16
#, kde-format
msgid "Show the content size"
msgstr "顯示內容大小"

#. i18n: ectx: label, entry (DirectorySizeMode), group (ContentDisplay)
#: settings/dolphin_contentdisplaysettings.kcfg:19
#, kde-format
msgid "Do not show any directory size"
msgstr "不顯示任何目錄大小"

#. i18n: ectx: label, entry (RecursiveDirectorySizeLimit), group (ContentDisplay)
#: settings/dolphin_contentdisplaysettings.kcfg:25
#, kde-format
msgid "Recursive directory size limit"
msgstr "遞迴目錄大小限制"

#. i18n: ectx: label, entry (UseShortRelativeDates), group (ContentDisplay)
#: settings/dolphin_contentdisplaysettings.kcfg:29
#, kde-format
msgid "if true we use short relative dates, if not short dates"
msgstr "若為真使用短的相對日期，否則使用短日期"

#. i18n: ectx: label, entry (UsePermissionsFormat), group (ContentDisplay)
#: settings/dolphin_contentdisplaysettings.kcfg:33
#, kde-format
msgid "Permissions style format"
msgstr "權限風格格式"

#. i18n: ectx: label, entry (ShowCopyMoveMenu), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:10
#, kde-format
msgid "Show 'Copy To' and 'Move To' commands in context menu"
msgstr "在選單中顯示「複製到」與「移動到」命令"

#. i18n: ectx: label, entry (ShowAddToPlaces), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:14
#, kde-format
msgid "Show 'Add to Places' in context menu."
msgstr "在選單中顯示「新增到書籤」。"

#. i18n: ectx: label, entry (ShowSortBy), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:18
#, kde-format
msgid "Show 'Sort By' in context menu."
msgstr "在選單中顯示「排序依據」。"

#. i18n: ectx: label, entry (ShowViewMode), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:22
#, kde-format
msgid "Show 'View Mode' in context menu."
msgstr "在選單中顯示「檢視模式」。"

#. i18n: ectx: label, entry (ShowOpenInNewTab), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:26
#, kde-format
msgid "Show 'Open in New Tab' and 'Open in New Tabs' in context menu."
msgstr "在選單中顯示「在新分頁開啟」。"

#. i18n: ectx: label, entry (ShowOpenInNewWindow), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:30
#, kde-format
msgid "Show 'Open in New Window' in context menu."
msgstr "在選單中顯示「在新視窗開啟」。"

#. i18n: ectx: label, entry (ShowOpenInSplitView), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:34
#, kde-format
msgid "Show 'Open In Split View' in context menu."
msgstr "在選單中顯示「用分割檢視開啟」。"

#. i18n: ectx: label, entry (ShowCopyLocation), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:38
#, kde-format
msgid "Show 'Copy Location' in context menu."
msgstr "在選單中顯示「複製位置」。"

#. i18n: ectx: label, entry (ShowDuplicateHere), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:42
#, kde-format
msgid "Show 'Duplicate Here' in context menu."
msgstr "在選單中顯示「在此建立複本」。"

#. i18n: ectx: label, entry (ShowOpenTerminal), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:46
#, kde-format
msgid "Show 'Open Terminal' in context menu."
msgstr "在選單中顯示「在此開啟終端機」。"

#. i18n: ectx: label, entry (ShowCopyToOtherSplitView), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:50
#, kde-format
msgid "Show 'Copy to other split view' in context menu."
msgstr "在選單中顯示「複製到另一個檢視」。"

#. i18n: ectx: label, entry (ShowMoveToOtherSplitView), group (ContextMenu)
#: settings/dolphin_contextmenusettings.kcfg:54
#, kde-format
msgid "Show 'Move to other split view' in context menu."
msgstr "在選單中顯示「移動到另一個檢視」。"

#. i18n: ectx: label, entry (ColumnPositions), group (DetailsMode)
#: settings/dolphin_detailsmodesettings.kcfg:27
#, kde-format
msgid "Position of columns"
msgstr "欄位位置"

#. i18n: ectx: label, entry (SidePadding), group (DetailsMode)
#: settings/dolphin_detailsmodesettings.kcfg:31
#, kde-format
msgid "Side Padding"
msgstr "側邊填充"

#. i18n: ectx: label, entry (HighlightEntireRow), group (DetailsMode)
#: settings/dolphin_detailsmodesettings.kcfg:35
#, kde-format
msgid "Highlight entire row"
msgstr "突顯整行"

#. i18n: ectx: label, entry (ExpandableFolders), group (DetailsMode)
#: settings/dolphin_detailsmodesettings.kcfg:39
#, kde-format
msgid "Expandable folders"
msgstr "可擴展資料夾"

#. i18n: ectx: label, entry (HiddenFilesShown), group (Settings)
#: settings/dolphin_directoryviewpropertysettings.kcfg:11
#, kde-format
msgctxt "@label"
msgid "Hidden files shown"
msgstr "已顯示隱藏檔案"

#. i18n: ectx: whatsthis, entry (HiddenFilesShown), group (Settings)
#: settings/dolphin_directoryviewpropertysettings.kcfg:12
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"When this option is enabled hidden files, such as those starting with a '.', "
"will be shown in the file view."
msgstr "開啟此選項的話，檔案檢視中會顯示出隱藏檔案（檔名以 . 開頭的檔案）"

#. i18n: ectx: label, entry (Version), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:19
#, kde-format
msgctxt "@label"
msgid "Version"
msgstr "版本"

#. i18n: ectx: whatsthis, entry (Version), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:20
#, kde-format
msgctxt "@info:whatsthis"
msgid "This option defines the used version of the view properties."
msgstr "此選項定義檢視屬性使用的版本。"

#. i18n: ectx: label, entry (ViewMode), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:25
#, kde-format
msgctxt "@label"
msgid "View Mode"
msgstr "檢視模式"

#. i18n: ectx: whatsthis, entry (ViewMode), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:26
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"This option controls the style of the view. Currently supported values "
"include icons (0), details (1) and column (2) views."
msgstr ""
"此選項控制檢視的樣式。目前支援的樣式有圖示（0）、詳細資料（1）與欄位檢視"
"（2）。"

#. i18n: ectx: label, entry (PreviewsShown), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:31
#, kde-format
msgctxt "@label"
msgid "Previews shown"
msgstr "已顯示預覽"

#. i18n: ectx: whatsthis, entry (PreviewsShown), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:32
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"When this option is enabled, a preview of the file content is shown as an "
"icon."
msgstr "此選項開啟的話，檔案內容會以圖示方式預覽出來。"

#. i18n: ectx: label, entry (GroupedSorting), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:37
#, kde-format
msgctxt "@label"
msgid "Grouped Sorting"
msgstr "將排序結果分組"

#. i18n: ectx: whatsthis, entry (GroupedSorting), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:38
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"When this option is enabled, the sorted items are categorized into groups."
msgstr "開啟此選項的話，排序的項目會依類別做整理。"

#. i18n: ectx: label, entry (SortRole), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:43
#, kde-format
msgctxt "@label"
msgid "Sort files by"
msgstr "排序檔案依據"

#. i18n: ectx: whatsthis, entry (SortRole), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:44
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"This option defines which attribute (text, size, date, etc.) sorting is "
"performed on."
msgstr "此選項定義排序檔案時要依據哪個屬性（如文字、大小、日期等）。"

#. i18n: ectx: label, entry (SortOrder), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:49
#, kde-format
msgctxt "@label"
msgid "Order in which to sort files"
msgstr "排序檔案於"

#. i18n: ectx: label, entry (SortFoldersFirst), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:56
#, kde-format
msgctxt "@label"
msgid "Show folders first when sorting files and folders"
msgstr "排序檔案與資料夾時，先顯示資料夾"

#. i18n: ectx: label, entry (SortHiddenLast), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:61
#, kde-format
msgctxt "@label"
msgid "Show hidden files and folders last"
msgstr "在最後顯示隱藏檔案與資料夾"

#. i18n: ectx: label, entry (VisibleRoles), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:66
#, kde-format
msgctxt "@label"
msgid "Visible roles"
msgstr "可見角色"

#. i18n: ectx: label, entry (HeaderColumnWidths), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:71
#, kde-format
msgctxt "@label"
msgid "Header column widths"
msgstr "標頭欄位寬度"

#. i18n: ectx: label, entry (Timestamp), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:76
#, kde-format
msgctxt "@label"
msgid "Properties last changed"
msgstr "最後變更屬性時間"

#. i18n: ectx: whatsthis, entry (Timestamp), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:77
#, kde-format
msgctxt "@info:whatsthis"
msgid "The last time these properties were changed by the user."
msgstr "使用者最後變更這些屬性的時間"

#. i18n: ectx: label, entry (AdditionalInfo), group (Dolphin)
#: settings/dolphin_directoryviewpropertysettings.kcfg:82
#, kde-format
msgctxt "@label"
msgid "Additional Information"
msgstr "額外資訊"

#. i18n: ectx: label, entry (DoubleClickViewAction), group (General)
#: settings/dolphin_generalsettings.kcfg:18
#, kde-format
msgid "Select Action"
msgstr "選擇動作"

#. i18n: ectx: label, entry (DoubleClickViewCustomAction), group (General)
#: settings/dolphin_generalsettings.kcfg:22
#, kde-format
msgid "Custom Action"
msgstr "自訂動作"

#. i18n: ectx: label, entry (EditableUrl), group (General)
#: settings/dolphin_generalsettings.kcfg:25
#, kde-format
msgid "Should the URL be editable for the user"
msgstr "使用者是否可編輯此網址"

#. i18n: ectx: label, entry (UrlCompletionMode), group (General)
#: settings/dolphin_generalsettings.kcfg:29
#, kde-format
msgid "Text completion mode of the URL Navigator"
msgstr "網址導覽的文字補完模式"

#. i18n: ectx: label, entry (ShowFullPath), group (General)
#: settings/dolphin_generalsettings.kcfg:33
#, kde-format
msgid "Should the full path be shown inside the location bar"
msgstr "是否要在位置列內顯示完整位置"

#. i18n: ectx: label, entry (ShowFullPathInTitlebar), group (General)
#: settings/dolphin_generalsettings.kcfg:37
#, kde-format
msgid "Should the full path be shown in the title bar"
msgstr "是否要在標題列內顯示完整位置"

#. i18n: ectx: label, entry (OpenExternallyCalledFolderInNewTab), group (General)
#: settings/dolphin_generalsettings.kcfg:41
#, kde-format
msgid ""
"Should an externally called folder open in a new tab in an existing Dolphin "
"instance"
msgstr "是否要將外部開啟的資料夾開在現存 Dolphin 實體的新分頁中"

#. i18n: ectx: label, entry (Version), group (General)
#: settings/dolphin_generalsettings.kcfg:45
#, kde-format
msgid ""
"Internal config version of Dolphin, mainly Used to determine whether an "
"updated version of Dolphin is running, so as to migrate config entries that "
"were removed/renamed ...etc"
msgstr ""
"Dolphin 的內部設定版本，主要用來判斷是否在執行更新版的 Dolphin 以移轉被移除、"
"重新命名等等變更的設定項目"

#. i18n: ectx: label, entry (ModifiedStartupSettings), group (General)
#: settings/dolphin_generalsettings.kcfg:49
#, kde-format
msgid ""
"Have the startup settings been modified (internal setting not shown in the "
"UI)"
msgstr "啟動設定是否已被更改（未在介面上顯示的內部設定）"

#. i18n: ectx: label, entry (HomeUrl), group (General)
#: settings/dolphin_generalsettings.kcfg:53
#, kde-format
msgid "Home URL"
msgstr "家目錄網址"

#. i18n: ectx: label, entry (RememberOpenedTabs), group (General)
#: settings/dolphin_generalsettings.kcfg:57
#, kde-format
msgid "Remember open folders and tabs"
msgstr "記住開啟的資料夾與分頁"

#. i18n: ectx: label, entry (SplitView), group (General)
#: settings/dolphin_generalsettings.kcfg:61
#, kde-format
msgid "Place two views side by side"
msgstr "將兩個檢視並排"

#. i18n: ectx: label, entry (FilterBar), group (General)
#: settings/dolphin_generalsettings.kcfg:66
#, kde-format
msgid "Should the filter bar be shown"
msgstr "是否顯示過濾器列"

#. i18n: ectx: label, entry (GlobalViewProps), group (General)
#: settings/dolphin_generalsettings.kcfg:70
#, kde-format
msgid "Should the view properties be used for all folders"
msgstr "此檢視屬性是否要套用到所有目錄"

#. i18n: ectx: label, entry (BrowseThroughArchives), group (General)
#: settings/dolphin_generalsettings.kcfg:74
#, kde-format
msgid "Browse through archives"
msgstr "透過歸檔瀏覽"

#. i18n: ectx: label, entry (ConfirmClosingMultipleTabs), group (General)
#: settings/dolphin_generalsettings.kcfg:78
#, kde-format
msgid "Ask for confirmation when closing windows with multiple tabs."
msgstr "關閉包含多個分頁的視窗時先詢問確認"

#. i18n: ectx: label, entry (ConfirmClosingTerminalRunningProgram), group (General)
#: settings/dolphin_generalsettings.kcfg:82
#, kde-format
msgid ""
"Ask for confirmation when closing windows with a program that is still "
"running in the Terminal panel."
msgstr "當打算關閉有應用程式在「終端機」面板執行的視窗時詢問確認。"

#. i18n: ectx: label, entry (RenameInline), group (General)
#: settings/dolphin_generalsettings.kcfg:86
#, kde-format
msgid "Rename single items inline"
msgstr "在行內重新命名單個項目"

#. i18n: ectx: label, entry (ShowSelectionToggle), group (General)
#: settings/dolphin_generalsettings.kcfg:90
#, kde-format
msgid "Show selection toggle"
msgstr "顯示選取切換"

#. i18n: ectx: label, entry (ShowPasteBarAfterCopying), group (General)
#: settings/dolphin_generalsettings.kcfg:94
#, kde-format
msgid ""
"Show a bar for easy pasting after a cut or copy was done using the selection "
"mode bottom bar."
msgstr "使用選取模式下方工具列進行剪下或複製後，顯示方便快速貼上的工具列。"

#. i18n: ectx: label, entry (UseTabForSwitchingSplitView), group (General)
#: settings/dolphin_generalsettings.kcfg:98
#, kde-format
msgid "Use tab for switching between right and left view"
msgstr "使用分頁在右邊與左邊的檢視中切換"

#. i18n: ectx: label, entry (CloseActiveSplitView), group (General)
#: settings/dolphin_generalsettings.kcfg:102
#, kde-format
msgid "Close the view in focus when turning off split view"
msgstr "關閉分割檢視時關閉聚焦的檢視"

#. i18n: ectx: label, entry (OpenNewTabAfterLastTab), group (General)
#: settings/dolphin_generalsettings.kcfg:106
#, kde-format
msgid "New tab will be open after last one"
msgstr "新分頁將會開在目前最後一個分頁後方"

#. i18n: ectx: label, entry (ShowToolTips), group (General)
#: settings/dolphin_generalsettings.kcfg:110
#, kde-format
msgid "Show item information on hover"
msgstr "游標停留時顯示項目資訊"

#. i18n: ectx: label, entry (ViewPropsTimestamp), group (General)
#: settings/dolphin_generalsettings.kcfg:114
#, kde-format
msgid "Timestamp since when the view properties are valid"
msgstr "此檢視屬性啟用的時間"

#. i18n: ectx: label, entry (AutoExpandFolders), group (General)
#: settings/dolphin_generalsettings.kcfg:117
#, kde-format
msgid "Use auto-expanding folders for all view types"
msgstr "對所有檢視模式都使用自動展開資料夾"

#. i18n: ectx: label, entry (ShowStatusBar), group (General)
#: settings/dolphin_generalsettings.kcfg:121
#, kde-format
msgid "Show the statusbar"
msgstr "顯示狀態列"

#. i18n: ectx: label, entry (ShowZoomSlider), group (General)
#: settings/dolphin_generalsettings.kcfg:126
#, kde-format
msgid "Show zoom slider in the statusbar"
msgstr "在狀態列顯示縮放滑動條"

#. i18n: ectx: label, entry (ShowSpaceInfo), group (General)
#: settings/dolphin_generalsettings.kcfg:130
#, kde-format
msgid "Show the space information in the statusbar"
msgstr "在狀態列顯示空間資訊"

#. i18n: ectx: label, entry (LockPanels), group (General)
#: settings/dolphin_generalsettings.kcfg:134
#, kde-format
msgid "Lock the layout of the panels"
msgstr "鎖定面板的佈局"

#. i18n: ectx: label, entry (EnlargeSmallPreviews), group (General)
#: settings/dolphin_generalsettings.kcfg:138
#, kde-format
msgid "Enlarge Small Previews"
msgstr "將小的預覽放大"

#. i18n: ectx: label, entry (SortingChoice), group (General)
#: settings/dolphin_generalsettings.kcfg:147
#, kde-format
msgid ""
"Choose Natural, Case Sensitive, or Case Insensitive order of sorting the "
"items"
msgstr "選擇自然、區分大小寫或是不區分大小寫的項目 排序法"

#. i18n: ectx: label, entry (HideXTrashFile), group (General)
#: settings/dolphin_generalsettings.kcfg:152
#, kde-format
msgid "Also hide files with application/x-trash mimetype"
msgstr "也隱藏 MIME 類型為 application/x-trash 的檔案"

#. i18n: ectx: label, entry (ConfirmOpenManyFolders), group (Notification Messages)
#: settings/dolphin_generalsettings.kcfg:158
#, kde-format
msgid "Ask for confirmation when opening many folders at once."
msgstr "開啟多個資料夾時先詢問確認。"

#. i18n: ectx: label, entry (ConfirmOpenManyTerminals), group (Notification Messages)
#: settings/dolphin_generalsettings.kcfg:162
#, kde-format
msgid "Ask for confirmation when opening many terminals at once."
msgstr "開啟多個終端機時先詢問確認。"

#. i18n: ectx: label, entry (TextWidthIndex), group (IconsMode)
#: settings/dolphin_iconsmodesettings.kcfg:27
#, kde-format
msgid "Text width index"
msgstr "文字寬度索引"

#. i18n: ectx: label, entry (MaximumTextLines), group (IconsMode)
#: settings/dolphin_iconsmodesettings.kcfg:31
#, kde-format
msgid "Maximum textlines (0 means unlimited)"
msgstr "最大文字行（0 表示不限制）"

#. i18n: ectx: label, entry (enabledPlugins), group (VersionControl)
#: settings/dolphin_versioncontrolsettings.kcfg:10
#, kde-format
msgid "Enabled plugins"
msgstr "已開啟的外掛程式"

#: settings/dolphinsettingsdialog.cpp:41
#, kde-format
msgctxt "@title:window"
msgid "Configure"
msgstr "設定"

#: settings/dolphinsettingsdialog.cpp:45
#, kde-format
msgctxt "@title:group Interface settings"
msgid "Interface"
msgstr "介面"

#: settings/dolphinsettingsdialog.cpp:51
#, kde-format
msgctxt "@title:group"
msgid "View"
msgstr "檢視"

#: settings/dolphinsettingsdialog.cpp:69
#, kde-format
msgctxt "@title:group"
msgid "Context Menu"
msgstr "內文選單"

#: settings/dolphinsettingsdialog.cpp:79
#, kde-format
msgctxt "@title:group"
msgid "Trash"
msgstr "垃圾桶"

#: settings/dolphinsettingsdialog.cpp:89
#, kde-format
msgctxt "@title:group"
msgid "User Feedback"
msgstr "使用者回饋"

#: settings/dolphinsettingsdialog.cpp:167
#, kde-format
msgid ""
"You have unsaved changes. Do you want to apply the changes or discard them?"
msgstr "您有未儲存的變更。要套用還是捨棄變更？"

#: settings/dolphinsettingsdialog.cpp:168
#, kde-format
msgid "Warning"
msgstr "警告"

#: settings/interface/confirmationssettingspage.cpp:48
#, kde-format
msgctxt "@title:group"
msgid "Ask for confirmation in all KDE applications when:"
msgstr "在所有 KDE 應用程式中確認詢問的時機："

#: settings/interface/confirmationssettingspage.cpp:51
#, kde-format
msgctxt "@option:check Ask for confirmation when"
msgid "Moving files or folders to trash"
msgstr "將檔案或資料夾移到垃圾桶時"

#: settings/interface/confirmationssettingspage.cpp:52
#, kde-format
msgctxt "@option:check Ask for confirmation when"
msgid "Emptying trash"
msgstr "清空垃圾桶"

#: settings/interface/confirmationssettingspage.cpp:53
#, kde-format
msgctxt "@option:check Ask for confirmation when"
msgid "Deleting files or folders"
msgstr "刪除檔案或資料夾時"

#: settings/interface/confirmationssettingspage.cpp:55
#, kde-format
msgctxt "@title:group"
msgid "Ask for confirmation in Dolphin when:"
msgstr "在 Dolphin 詢問確認，當："

#: settings/interface/confirmationssettingspage.cpp:58
#, kde-format
msgctxt "@option:check Ask for confirmation in Dolphin when"
msgid "Closing windows with multiple tabs"
msgstr "關閉包含多個分頁的視窗"

#: settings/interface/confirmationssettingspage.cpp:62
#, kde-format
msgctxt "@option:check Ask for confirmation when"
msgid "Closing windows with a program running in the Terminal panel"
msgstr "關閉有應用程式在「終端機」面板執行的視窗"

#: settings/interface/confirmationssettingspage.cpp:65
#, kde-format
msgctxt "@option:check Ask for confirmation in Dolphin when"
msgid "Opening many folders at once"
msgstr "開啟多個資料夾時"

#: settings/interface/confirmationssettingspage.cpp:66
#, kde-format
msgctxt "@option:check Ask for confirmation in Dolphin when"
msgid "Opening many terminals at once"
msgstr "同時開啟數個終端機時"

#: settings/interface/confirmationssettingspage.cpp:67
#, kde-format
msgctxt "@option:check Ask for confirmation in Dolphin when"
msgid "Switching to act as an administrator"
msgstr "切換至管理員操作模式時"

#: settings/interface/confirmationssettingspage.cpp:69
#, kde-format
msgctxt "@title:group"
msgid "When opening an executable file:"
msgstr "開啟可執行檔時："

#: settings/interface/confirmationssettingspage.cpp:73
#, kde-format
msgid "Always ask"
msgstr "永遠詢問"

#: settings/interface/confirmationssettingspage.cpp:73
#, kde-format
msgid "Open in application"
msgstr "在應用程式開啟"

#: settings/interface/confirmationssettingspage.cpp:73
#, kde-format
msgid "Run script"
msgstr "執行文稿"

#: settings/interface/folderstabssettingspage.cpp:49
#, kde-format
msgctxt "@option:radio Show on startup"
msgid "Folders, tabs, and window state from last time"
msgstr "上次使用時的資料夾、分頁及視窗狀態"

#: settings/interface/folderstabssettingspage.cpp:54
#, kde-format
msgctxt "@option:radio"
msgid "Show home location on startup"
msgstr "啟動時顯示家目錄位置"

#. i18n: For entering the absolute path to a user-specified home folder. Default: /home/userName/
#: settings/interface/folderstabssettingspage.cpp:61
#, kde-format
msgctxt "@info:placeholder"
msgid "Enter home location path"
msgstr "輸入家目錄位置的路徑"

#: settings/interface/folderstabssettingspage.cpp:68
#, kde-format
msgctxt "@action:button"
msgid "Select Home Location"
msgstr "選擇家目錄位置"

#: settings/interface/folderstabssettingspage.cpp:78
#, kde-format
msgctxt "@action:button"
msgid "Use Current Location"
msgstr "使用目前的位置"

#: settings/interface/folderstabssettingspage.cpp:82
#, kde-format
msgctxt "@action:button"
msgid "Use Default Location"
msgstr "使用預設位置"

#: settings/interface/folderstabssettingspage.cpp:90
#, kde-format
msgctxt "@label:textbox"
msgid "Show on startup:"
msgstr "啟動時顯示："

#: settings/interface/folderstabssettingspage.cpp:103
#, kde-format
msgctxt "@label:checkbox"
msgid "Opening Folders:"
msgstr "資料夾開啟方式："

#: settings/interface/folderstabssettingspage.cpp:104
#, kde-format
msgctxt "@option:check Opening Folders"
msgid "Keep a single Dolphin window, opening new folders in tabs"
msgstr "保持單個 Dolphin 視窗，在新分頁開啟資料夾"

#: settings/interface/folderstabssettingspage.cpp:108
#, kde-format
msgctxt "@label:checkbox"
msgid "Window:"
msgstr "視窗："

#: settings/interface/folderstabssettingspage.cpp:109
#, kde-format
msgctxt "@option:check Startup Settings"
msgid "Show full path in title bar"
msgstr "在標題列內顯示完整位置"

#: settings/interface/folderstabssettingspage.cpp:112
#, kde-format
msgctxt "@option:check Window Startup Settings"
msgid "Show filter bar"
msgstr "顯示過濾器列"

#: settings/interface/folderstabssettingspage.cpp:118
#, kde-format
msgctxt "option:radio"
msgid "After current tab"
msgstr "在目前分頁後方"

#: settings/interface/folderstabssettingspage.cpp:119
#, kde-format
msgctxt "option:radio"
msgid "At end of tab bar"
msgstr "在分頁列尾端"

#: settings/interface/folderstabssettingspage.cpp:123
#, kde-format
msgctxt "@title:group"
msgid "Open new tabs: "
msgstr "新分頁開啟位置："

#: settings/interface/folderstabssettingspage.cpp:130
#, kde-format
msgctxt "@title:group"
msgid "Split view: "
msgstr "分割檢視："

#: settings/interface/folderstabssettingspage.cpp:131
#, kde-format
msgctxt "option:check split view panes"
msgid "Switch between views with Tab key"
msgstr "使用 Tab 鍵在檢視間切換"

#: settings/interface/folderstabssettingspage.cpp:136
#, kde-format
msgctxt "option:check"
msgid "Turning off split view closes the view in focus"
msgstr "關閉「分割檢視」時會關閉使用中的檢視"

#: settings/interface/folderstabssettingspage.cpp:139
#, kde-format
msgid ""
"When unchecked, the opposite view will be closed. The Close icon always "
"illustrates which view (left or right) will be closed."
msgstr ""
"取消勾選時，將會關閉反面的檢視。關閉圖示會顯示將會關閉哪個檢視（左方或右"
"方）。"

#: settings/interface/folderstabssettingspage.cpp:142
#, kde-format
msgid "New windows:"
msgstr "新增視窗："

#: settings/interface/folderstabssettingspage.cpp:143
#, kde-format
msgctxt "@option:check Startup Settings"
msgid "Begin in split view mode"
msgstr "在分割檢視模式啟動"

#: settings/interface/folderstabssettingspage.cpp:291
#, kde-format
msgctxt "@info"
msgid ""
"The location for the home folder is invalid or does not exist, it will not "
"be applied."
msgstr "家目錄的位置無效或不存在，將不會套用。"

#: settings/interface/interfacesettingspage.cpp:37
#, kde-format
msgctxt "@title:tab Folders & Tabs settings"
msgid "Folders && Tabs"
msgstr "資料夾與分頁"

#: settings/interface/interfacesettingspage.cpp:42
#: settings/kcm/kcmdolphingeneral.cpp:44
#, kde-format
msgctxt "@title:tab Previews settings"
msgid "Previews"
msgstr "預覽"

#: settings/interface/interfacesettingspage.cpp:47
#: settings/kcm/kcmdolphingeneral.cpp:49
#, kde-format
msgctxt "@title:tab Confirmations settings"
msgid "Confirmations"
msgstr "確認"

#: settings/interface/interfacesettingspage.cpp:53
#, kde-format
msgctxt "@title:tab Panels settings"
msgid "Panels"
msgstr "面板"

#: settings/interface/interfacesettingspage.cpp:59
#, kde-format
msgctxt "@title:tab Status & Location bars settings"
msgid "Status && Location bars"
msgstr "狀態列與位置工具列"

#: settings/interface/panelsettingspage.cpp:34
#, kde-format
msgctxt "@option:check"
msgid "Show previews"
msgstr "顯示預覽"

#: settings/interface/panelsettingspage.cpp:35
#, kde-format
msgctxt "@option:check"
msgid "Auto-play media files"
msgstr "自動播放媒體檔案"

#: settings/interface/panelsettingspage.cpp:36
#, kde-format
msgctxt "@option:check"
msgid "Show item on hover"
msgstr "游標停留時顯示項目"

#: settings/interface/panelsettingspage.cpp:37
#, kde-format
msgctxt "@option:check"
msgid "Use &long date, for example '%1'"
msgstr "使用長日期，例如 '%1'(&L)"

#: settings/interface/panelsettingspage.cpp:38
#, kde-format
msgctxt "@option:check"
msgid "Use &condensed date, for example '%1'"
msgstr "使用縮短日期，例如 '%1'(&C)"

#: settings/interface/panelsettingspage.cpp:44
#, kde-format
msgctxt "@label:checkbox"
msgid "Information Panel:"
msgstr "資訊面板："

#: settings/interface/panelsettingspage.cpp:52
#, kde-format
msgctxt "@info"
msgid ""
"Panel settings are also available through their context menu. Open it by "
"pressing the right mouse button on a panel."
msgstr "面板設定也可以從內文選單存取。在面板上按滑鼠右鍵即可開啟。"

#: settings/interface/previewssettingspage.cpp:46
#, kde-format
msgctxt "@title:group"
msgid "Show previews in the view for:"
msgstr "要在檢視中顯示預覽的項目："

#. i18n: This label forms a full sentence together with the spinbox content.
#. Depending on the option chosen in the spinbox, it reads "Show previews for [files below n MiB]"
#. or "Show previews for [files of any size]".
#: settings/interface/previewssettingspage.cpp:64
#: settings/interface/previewssettingspage.cpp:77
#, kde-format
msgctxt "@label:spinbox"
msgid "Show previews for"
msgstr "為哪些檔案顯示預覽"

#: settings/interface/previewssettingspage.cpp:68
#: settings/interface/previewssettingspage.cpp:81
#, kde-format
msgctxt ""
"used as a prefix in a spinbox showing e.g. 'Show previews for [files below 3 "
"MiB]'"
msgid "files below "
msgstr "低於此大小的檔案"

#: settings/interface/previewssettingspage.cpp:69
#: settings/interface/previewssettingspage.cpp:82
#, kde-format
msgctxt "Mebibytes; used as a suffix in a spinbox showing e.g. '3 MiB'"
msgid " MiB"
msgstr " MiB"

#: settings/interface/previewssettingspage.cpp:71
#, kde-format
msgctxt "e.g. 'Show previews for [files of any size]'"
msgid "files of any size"
msgstr "任何大小的檔案"

#: settings/interface/previewssettingspage.cpp:84
#, kde-format
msgctxt "e.g. 'Show previews for [no file]'"
msgid "no file"
msgstr "無檔案"

#: settings/interface/previewssettingspage.cpp:91
#, kde-format
msgctxt "@option:check"
msgid "Show previews for folders"
msgstr "顯示資料夾的預覽"

#: settings/interface/previewssettingspage.cpp:100
#, kde-kuit-format
msgctxt "@info"
msgid ""
"<para>Creating <emphasis>previews</emphasis> for remote folders is very "
"intensive in terms of network resource usage.</para><para>Disable this if "
"navigating remote folders in Dolphin is slow or when accessing storage over "
"metered connections.</para>"
msgstr ""
"<para>建立遠端資料夾的<emphasis>預覽</emphasis>需要非常多的網路資源。</"
"para><para>在 Dolphin 中瀏覽遠端資料夾很慢或利用計量連線時請停用此選項。</"
"para>"

#: settings/interface/previewssettingspage.cpp:112
#, kde-format
msgctxt "@title:group"
msgid "Local storage:"
msgstr "本機儲存："

#: settings/interface/previewssettingspage.cpp:117
#, kde-format
msgctxt "@title:group"
msgid "Remote storage:"
msgstr "遠端儲存"

#: settings/interface/statusandlocationbarssettingspage.cpp:36
#, kde-format
msgctxt "@option:check"
msgid "Show status bar"
msgstr "顯示狀態列"

#: settings/interface/statusandlocationbarssettingspage.cpp:37
#, kde-format
msgctxt "@option:check"
msgid "Show zoom slider"
msgstr "顯示縮放滑動條"

#: settings/interface/statusandlocationbarssettingspage.cpp:38
#, kde-format
msgctxt "@option:check"
msgid "Show space information"
msgstr "顯示空間資訊"

#: settings/interface/statusandlocationbarssettingspage.cpp:40
#, kde-format
msgctxt "@title:group"
msgid "Status Bar: "
msgstr "狀態列："

#: settings/interface/statusandlocationbarssettingspage.cpp:47
#, kde-format
msgctxt "@option:check Startup Settings"
msgid "Make location bar editable"
msgstr "能夠編輯位置列"

#: settings/interface/statusandlocationbarssettingspage.cpp:48
#, kde-format
msgid "Location bar:"
msgstr "位置工具列："

#: settings/interface/statusandlocationbarssettingspage.cpp:50
#, kde-format
msgctxt "@option:check Startup Settings"
msgid "Show full path inside location bar"
msgstr "在位置列內顯示完整位置"

#: settings/kcm/kcmdolphingeneral.cpp:39
#, kde-format
msgctxt "@title:tab Behavior settings"
msgid "Behavior"
msgstr "行為"

#: settings/kcm/kcmdolphinviewmodes.cpp:39
#: settings/viewmodes/viewsettingspage.cpp:43
#, kde-format
msgctxt "@title:tab"
msgid "Icons"
msgstr "圖示"

#: settings/kcm/kcmdolphinviewmodes.cpp:44
#: settings/viewmodes/viewsettingspage.cpp:48
#, kde-format
msgctxt "@title:tab"
msgid "Compact"
msgstr "簡潔模式"

#: settings/kcm/kcmdolphinviewmodes.cpp:49
#: settings/viewmodes/viewsettingspage.cpp:53
#, kde-format
msgctxt "@title:tab"
msgid "Details"
msgstr "詳細資料"

#: settings/viewmodes/contentdisplaytab.cpp:38
#, kde-format
msgctxt "option:radio"
msgid "Natural"
msgstr "自然"

#: settings/viewmodes/contentdisplaytab.cpp:39
#, kde-format
msgctxt "option:radio"
msgid "Alphabetical, case insensitive"
msgstr "字母，不區分大小寫"

#: settings/viewmodes/contentdisplaytab.cpp:40
#, kde-format
msgctxt "option:radio"
msgid "Alphabetical, case sensitive"
msgstr "字母，區分大小寫"

#: settings/viewmodes/contentdisplaytab.cpp:46
#, kde-format
msgctxt "@title:group"
msgid "Sorting mode: "
msgstr "排序模式："

#: settings/viewmodes/contentdisplaytab.cpp:52
#, kde-format
msgctxt "option:radio"
msgid "Show number of items"
msgstr "顯示項目數量"

#: settings/viewmodes/contentdisplaytab.cpp:53
#, kde-format
msgctxt "option:radio"
msgid "Show size of contents, up to "
msgstr "顯示內容大小，最大至 "

#: settings/viewmodes/contentdisplaytab.cpp:54
#, kde-format
msgctxt "option:radio"
msgid "Show no size"
msgstr "不顯示大小"

#: settings/viewmodes/contentdisplaytab.cpp:63
#, kde-format
msgid " level deep"
msgid_plural " levels deep"
msgstr[0] " 層深"

#: settings/viewmodes/contentdisplaytab.cpp:72
#, kde-format
msgctxt "@title:group"
msgid "Folder size:"
msgstr "資料夾大小："

#: settings/viewmodes/contentdisplaytab.cpp:82
#, kde-format
msgctxt "option:radio as in relative date"
msgid "Relative (e.g. '%1')"
msgstr "相對（例如「%1」）"

#: settings/viewmodes/contentdisplaytab.cpp:84
#, kde-format
msgctxt "option:radio as in absolute date"
msgid "Absolute (e.g. '%1')"
msgstr "絕對（例如「%1」）"

#: settings/viewmodes/contentdisplaytab.cpp:90
#, kde-format
msgctxt "@title:group"
msgid "Date style:"
msgstr "日期樣式："

#: settings/viewmodes/contentdisplaytab.cpp:93
#, kde-format
msgctxt "option:radio as symbolic style "
msgid "Symbolic (e.g. 'drwxr-xr-x')"
msgstr "符號（例如「drwxr-xr-x」）"

#: settings/viewmodes/contentdisplaytab.cpp:94
#, kde-format
msgctxt "option:radio as numeric style"
msgid "Numeric (Octal) (e.g. '755')"
msgstr "數字（八進制）（例如「755」）"

#: settings/viewmodes/contentdisplaytab.cpp:95
#, kde-format
msgctxt "option:radio as combined style"
msgid "Combined (e.g. 'drwxr-xr-x (755)')"
msgstr "合併（例如「drwxr-xr-x (755)」）"

#: settings/viewmodes/contentdisplaytab.cpp:97
#, kde-format
msgctxt "@title:group"
msgid "Permissions style:"
msgstr "權限風格："

#: settings/viewmodes/dolphinfontrequester.cpp:28
#, kde-format
msgctxt "@item:inlistbox Font"
msgid "System Font"
msgstr "系統字型"

#: settings/viewmodes/dolphinfontrequester.cpp:29
#, kde-format
msgctxt "@item:inlistbox Font"
msgid "Custom Font"
msgstr "自訂字型"

#: settings/viewmodes/dolphinfontrequester.cpp:32
#, kde-format
msgctxt "@action:button Choose font"
msgid "Choose…"
msgstr "選擇…"

#: settings/viewmodes/generalviewsettingspage.cpp:34
#, kde-format
msgctxt "@option:radio"
msgid "Use common display style for all folders"
msgstr "對所有資料夾使用共同的顯示方式"

#. i18n: The information in this sentence contradicts the preceding sentence. That's what the word "still" is communicating.
#. The previous sentence is "Use common display style for all folders".
#: settings/viewmodes/generalviewsettingspage.cpp:37
#, kde-format
msgctxt "@info"
msgid ""
"Some special views like search, recent files, or trash will still use a "
"custom display style."
msgstr "某些特殊檢視（像是搜尋、最近檔案、垃圾桶）還是會用自己的顯示方式。"

#: settings/viewmodes/generalviewsettingspage.cpp:42
#, kde-format
msgctxt "@option:radio"
msgid "Remember display style for each folder"
msgstr "記住每個資料夾的顯示方式"

#: settings/viewmodes/generalviewsettingspage.cpp:43
#, kde-format
msgctxt "@info"
msgid ""
"Dolphin will create a hidden .directory file in each folder you change view "
"properties for."
msgstr "Dolphin 將在每個您變更檢視屬性的資料夾建立隱藏的 .directory 檔案。"

#: settings/viewmodes/generalviewsettingspage.cpp:51
#, kde-format
msgctxt "@title:group"
msgid "Display style: "
msgstr "顯示方式："

#: settings/viewmodes/generalviewsettingspage.cpp:59
#, kde-format
msgctxt "@option:check"
msgid "Open archives as folder"
msgstr "將封存檔案當作資料夾開啟"

#: settings/viewmodes/generalviewsettingspage.cpp:60
#, kde-format
msgctxt "option:check"
msgid "Open folders during drag operations"
msgstr "在拖曳操作中開啟資料夾"

#: settings/viewmodes/generalviewsettingspage.cpp:61
#, kde-format
msgctxt "@title:group"
msgid "Browsing: "
msgstr "瀏覽："

#: settings/viewmodes/generalviewsettingspage.cpp:68
#, kde-format
msgctxt "@option:check"
msgid "Show item information on hover"
msgstr "游標停留時顯示項目資訊"

#: settings/viewmodes/generalviewsettingspage.cpp:69
#: settings/viewmodes/generalviewsettingspage.cpp:77
#, kde-format
msgctxt "@title:group"
msgid "Miscellaneous: "
msgstr "雜項："

#: settings/viewmodes/generalviewsettingspage.cpp:73
#, kde-format
msgctxt "@option:check"
msgid "Show selection marker"
msgstr "顯示選取標記"

#: settings/viewmodes/generalviewsettingspage.cpp:81
#, kde-format
msgctxt "option:check"
msgid "Rename single items inline"
msgstr "在行內重新命名單個項目"

#: settings/viewmodes/generalviewsettingspage.cpp:82
#, kde-format
msgid "Renaming multiple items is always done with a dialog window."
msgstr "重新命名多個項目時總是會利用對話框視窗。"

#: settings/viewmodes/generalviewsettingspage.cpp:85
#, kde-format
msgctxt "option:check"
msgid "Also hide backup files while hiding hidden files"
msgstr "在將隱藏檔案隱藏不顯示的時候也隱藏備份檔案"

#: settings/viewmodes/generalviewsettingspage.cpp:89
#, kde-format
msgctxt ""
"@info:tooltip %1 are the file patterns for mimetype application/x-trash"
msgid ""
"Backup files are the files whose mime-type is application/x-trash, patterns: "
"%1"
msgstr "備份檔案是指 MIME 類型為 application/x-trash 的檔案，符合的樣式：%1"

#: settings/viewmodes/generalviewsettingspage.cpp:121
#, kde-format
msgctxt ""
"Accessible description for combobox with actions of double click view "
"background setting"
msgid "Action to trigger when double clicking view background"
msgstr "雙擊檢視背景時要觸發的動作"

#. i18n: Completes the sentence "Double-click triggers [Nothing]".
#: settings/viewmodes/generalviewsettingspage.cpp:123
#, kde-format
msgctxt "@item:inlistbox"
msgid "Nothing"
msgstr "無動作"

#: settings/viewmodes/generalviewsettingspage.cpp:124
#, kde-format
msgctxt "@item:inlistbox"
msgid "Custom Command"
msgstr "自訂命令"

#. i18n: This sentence is incomplete because the user can choose an action that is triggered in a combobox that will appear directly after "triggers".
#. (While using a left-to-right language it will be to the right of "triggers", in a right-to-left layout it will be to the left.)
#. So please try to keep this translation in a way that it is a complete sentence when reading the content of the combobox as part of the sentence.
#. There can be many possible actions in the combobox. The default is "Nothing". Other actions are "New Tab", "Create Folder", "Show Hidden Files", …
#: settings/viewmodes/generalviewsettingspage.cpp:148
#, kde-format
msgctxt "@info"
msgid "Double-click triggers"
msgstr "雙擊觸發動作："

#: settings/viewmodes/generalviewsettingspage.cpp:155
#, kde-format
msgctxt "@title:group"
msgid "Background: "
msgstr "背景："

#: settings/viewmodes/generalviewsettingspage.cpp:160
#, kde-format
msgctxt ""
"Accessible description for custom command text field of double click view "
"background setting"
msgid "Enter custom command to trigger when double clicking view background"
msgstr "輸入雙擊檢視背景時要觸發的自訂命令"

#: settings/viewmodes/generalviewsettingspage.cpp:161
#, kde-format
msgctxt "@info:placeholder for terminal command"
msgid "Command…"
msgstr "命令…"

#: settings/viewmodes/generalviewsettingspage.cpp:165
#, kde-format
msgctxt "@label"
msgid ""
"Use {path} to get the path of the current folder. Example: dolphin {path}"
msgstr "使用 {path} 來取得目前資料夾的路徑。例如：dolphin {path}"

#: settings/viewmodes/viewsettingspage.cpp:31
#, kde-format
msgctxt "@title:tab General View settings"
msgid "General"
msgstr "一般"

#: settings/viewmodes/viewsettingspage.cpp:38
#, kde-format
msgctxt "@title:tab how file items columns are displayed"
msgid "Content Display"
msgstr "內容顯示"

#: settings/viewmodes/viewsettingstab.cpp:49
#, kde-format
msgctxt "@label:listbox"
msgid "Default icon size:"
msgstr "預設圖示大小："

#: settings/viewmodes/viewsettingstab.cpp:56
#, kde-format
msgctxt "@label:listbox"
msgid "Preview icon size:"
msgstr "預覽圖示大小："

#: settings/viewmodes/viewsettingstab.cpp:62
#, kde-format
msgctxt "@label:listbox"
msgid "Label font:"
msgstr "標籤字型："

#: settings/viewmodes/viewsettingstab.cpp:67
#, kde-format
msgctxt "@item:inlistbox Label width"
msgid "Small"
msgstr "小"

#: settings/viewmodes/viewsettingstab.cpp:68
#, kde-format
msgctxt "@item:inlistbox Label width"
msgid "Medium"
msgstr "中"

#: settings/viewmodes/viewsettingstab.cpp:69
#, kde-format
msgctxt "@item:inlistbox Label width"
msgid "Large"
msgstr "大"

#: settings/viewmodes/viewsettingstab.cpp:70
#, kde-format
msgctxt "@item:inlistbox Label width"
msgid "Huge"
msgstr "巨大"

#: settings/viewmodes/viewsettingstab.cpp:71
#, kde-format
msgctxt "@label:listbox"
msgid "Label width:"
msgstr "標籤寬度："

#: settings/viewmodes/viewsettingstab.cpp:74
#, kde-format
msgctxt "@item:inlistbox Maximum lines"
msgid "Unlimited"
msgstr "不限制"

#: settings/viewmodes/viewsettingstab.cpp:75
#, kde-format
msgctxt "@item:inlistbox Maximum lines"
msgid "1"
msgstr "1"

#: settings/viewmodes/viewsettingstab.cpp:76
#, kde-format
msgctxt "@item:inlistbox Maximum lines"
msgid "2"
msgstr "2"

#: settings/viewmodes/viewsettingstab.cpp:77
#, kde-format
msgctxt "@item:inlistbox Maximum lines"
msgid "3"
msgstr "3"

#: settings/viewmodes/viewsettingstab.cpp:78
#, kde-format
msgctxt "@item:inlistbox Maximum lines"
msgid "4"
msgstr "4"

#: settings/viewmodes/viewsettingstab.cpp:79
#, kde-format
msgctxt "@item:inlistbox Maximum lines"
msgid "5"
msgstr "5"

#: settings/viewmodes/viewsettingstab.cpp:80
#, kde-format
msgctxt "@label:listbox"
msgid "Maximum lines:"
msgstr "最大行數："

#: settings/viewmodes/viewsettingstab.cpp:85
#, kde-format
msgctxt "@item:inlistbox Maximum width"
msgid "Unlimited"
msgstr "不限制"

#: settings/viewmodes/viewsettingstab.cpp:86
#, kde-format
msgctxt "@item:inlistbox Maximum width"
msgid "Small"
msgstr "小"

#: settings/viewmodes/viewsettingstab.cpp:87
#, kde-format
msgctxt "@item:inlistbox Maximum width"
msgid "Medium"
msgstr "中"

#: settings/viewmodes/viewsettingstab.cpp:88
#, kde-format
msgctxt "@item:inlistbox Maximum width"
msgid "Large"
msgstr "大"

#: settings/viewmodes/viewsettingstab.cpp:89
#, kde-format
msgctxt "@label:listbox"
msgid "Maximum width:"
msgstr "最大寬度："

#: settings/viewmodes/viewsettingstab.cpp:93
#, kde-format
msgctxt "@option:check"
msgid "Expandable"
msgstr "可擴展"

#: settings/viewmodes/viewsettingstab.cpp:94
#, kde-format
msgctxt "@label:checkbox"
msgid "Folders:"
msgstr "資料夾："

#: settings/viewmodes/viewsettingstab.cpp:97
#, kde-format
msgctxt "@option:radio how files/folders are opened"
msgid "By clicking anywhere on the row"
msgstr "點擊同一行的任何地方"

#: settings/viewmodes/viewsettingstab.cpp:98
#, kde-format
msgctxt "@option:radio how files/folders are opened"
msgid "By clicking on icon or name"
msgstr "點擊圖示或名稱"

#. i18n: Users can choose here if items are opened by clicking on their name/icon or by clicking in the row.
#: settings/viewmodes/viewsettingstab.cpp:106
#, kde-format
msgctxt "@title:group"
msgid "Open files and folders:"
msgstr "檔案與資料夾開啟方式："

#: settings/viewmodes/viewsettingstab.cpp:243
#: statusbar/dolphinstatusbar.cpp:339
#, kde-format
msgctxt "@info:tooltip"
msgid "Size: 1 pixel"
msgid_plural "Size: %1 pixels"
msgstr[0] "大小：%1 像素"

#: settings/viewpropertiesdialog.cpp:60
#, kde-format
msgctxt "@title:window"
msgid "View Display Style"
msgstr "檢視顯示方式"

#: settings/viewpropertiesdialog.cpp:72
#, kde-format
msgctxt "@item:inlistbox"
msgid "Icons"
msgstr "圖示"

#: settings/viewpropertiesdialog.cpp:73
#, kde-format
msgctxt "@item:inlistbox"
msgid "Compact"
msgstr "簡潔模式"

#: settings/viewpropertiesdialog.cpp:74
#, kde-format
msgctxt "@item:inlistbox"
msgid "Details"
msgstr "詳細模式"

#: settings/viewpropertiesdialog.cpp:77
#, kde-format
msgctxt "@item:inlistbox Sort"
msgid "Ascending"
msgstr "遞增"

#: settings/viewpropertiesdialog.cpp:78
#, kde-format
msgctxt "@item:inlistbox Sort"
msgid "Descending"
msgstr "遞減"

#: settings/viewpropertiesdialog.cpp:86
#, kde-format
msgctxt "@option:check"
msgid "Show folders first"
msgstr "先顯示資料夾"

#: settings/viewpropertiesdialog.cpp:87
#, kde-format
msgctxt "@option:check"
msgid "Show hidden files last"
msgstr "在最後顯示隱藏檔案"

#: settings/viewpropertiesdialog.cpp:88
#, kde-format
msgctxt "@option:check"
msgid "Show preview"
msgstr "顯示預覽"

#: settings/viewpropertiesdialog.cpp:89
#, kde-format
msgctxt "@option:check"
msgid "Show in groups"
msgstr "以群組顯示"

#: settings/viewpropertiesdialog.cpp:90
#, kde-format
msgctxt "@option:check"
msgid "Show hidden files"
msgstr "顯示隱藏檔案"

#: settings/viewpropertiesdialog.cpp:93
#, kde-format
msgctxt "@title:group"
msgid "Additional Information"
msgstr "額外資訊"

#: settings/viewpropertiesdialog.cpp:132
#, kde-format
msgid "Choose what to see on each file or folder:"
msgstr "選擇每個檔案或資料夾的呈現方式："

#: settings/viewpropertiesdialog.cpp:142
#, kde-format
msgctxt "@label:listbox"
msgid "View mode:"
msgstr "檢視模式："

#: settings/viewpropertiesdialog.cpp:143
#, kde-format
msgctxt "@label:listbox"
msgid "Sorting:"
msgstr "排序："

#: settings/viewpropertiesdialog.cpp:147
#, kde-format
msgid "View options:"
msgstr "顯示選項："

#: settings/viewpropertiesdialog.cpp:166
#, kde-format
msgctxt "@option:radio Apply View Properties To"
msgid "Current folder"
msgstr "目前資料夾"

#: settings/viewpropertiesdialog.cpp:168
#, kde-format
msgctxt "@option:radio Apply View Properties To"
msgid "Current folder and sub-folders"
msgstr "目前的資料夾與子資料夾"

#: settings/viewpropertiesdialog.cpp:169
#, kde-format
msgctxt "@option:radio Apply View Properties To"
msgid "All folders"
msgstr "所有資料夾"

#: settings/viewpropertiesdialog.cpp:178
#, kde-format
msgctxt "@title:group"
msgid "Apply to:"
msgstr "套用至："

#: settings/viewpropertiesdialog.cpp:183
#, kde-format
msgctxt "@option:check"
msgid "Use as default view settings"
msgstr "使用預設顯示設定"

#: settings/viewpropertiesdialog.cpp:335
#, kde-format
msgctxt "@info"
msgid ""
"The view properties of all sub-folders will be changed. Do you want to "
"continue?"
msgstr "所有子資料夾的檢視屬性都將被改變。您確定要繼續嗎？"

#: settings/viewpropertiesdialog.cpp:365
#, kde-format
msgctxt "@info"
msgid ""
"The view properties of all folders will be changed. Do you want to continue?"
msgstr "所有資料夾的檢視屬性都將被改變。您確定要繼續嗎？"

#: settings/viewpropsprogressinfo.cpp:33
#, kde-format
msgctxt "@title:window"
msgid "Applying View Properties"
msgstr "套用檢視屬性"

#: settings/viewpropsprogressinfo.cpp:45 settings/viewpropsprogressinfo.cpp:107
#, kde-format
msgctxt "@info:progress"
msgid "Counting folders: %1"
msgstr "計算資料夾：%1"

#: settings/viewpropsprogressinfo.cpp:123
#, kde-format
msgctxt "@info:progress"
msgid "Folders: %1"
msgstr "資料夾：%1 "

#: statusbar/dolphinstatusbar.cpp:58
#, kde-format
msgctxt "Used as a noun, i.e. 'Here is the zoom level:'"
msgid "Zoom:"
msgstr "縮放："

#: statusbar/dolphinstatusbar.cpp:62
#, kde-format
msgid "Zoom"
msgstr "縮放"

#: statusbar/dolphinstatusbar.cpp:63
#, kde-format
msgctxt "Description for zoom-slider (accessibility)"
msgid "Sets the size of the file icons."
msgstr "設定檔案圖示的大小。"

#: statusbar/dolphinstatusbar.cpp:84
#, kde-format
msgid "Stop"
msgstr "停止"

#: statusbar/dolphinstatusbar.cpp:86
#, kde-format
msgctxt "@tooltip"
msgid "Stop loading"
msgstr "停止載入"

#: statusbar/dolphinstatusbar.cpp:141
#, kde-kuit-format
msgctxt "@info:whatsthis Statusbar"
msgid ""
"<para>This is the <emphasis>Statusbar</emphasis>. It contains three elements "
"by default (left to right):<list><item>A <emphasis>text field</emphasis> "
"that displays the size of selected items. If only one item is selected the "
"name and type is shown as well.</item><item>A <emphasis>zoom slider</"
"emphasis> that allows you to adjust the size of the icons in the view.</"
"item><item><emphasis>Space information</emphasis> about the current storage "
"device.</item></list></para>"
msgstr ""
"<para>這是<emphasis>狀態列</emphasis>。它預設含有三個元素，從左到右分別是："
"<list><item>一個顯示目前選取項目大小的<emphasis>文字欄位</emphasis> 。如果只"
"有選取一個項目，也會顯示它的名稱和型態。</item><item>一個<emphasis>縮放滑動條"
"</emphasis>，讓您調整檢視中的圖示大小。</item><item>目前儲存裝置的<emphasis>"
"空間資訊</emphasis>。</item></list></para>"

#: statusbar/dolphinstatusbar.cpp:281
#, kde-format
msgctxt "@action:inmenu"
msgid "Show Zoom Slider"
msgstr "顯示縮放滑動條"

#: statusbar/dolphinstatusbar.cpp:285
#, kde-format
msgctxt "@action:inmenu"
msgid "Show Space Information"
msgstr "顯示空間資訊"

#: statusbar/statusbarspaceinfo.cpp:136
#, kde-format
msgid "Disk Usage Statistics - current folder"
msgstr "磁碟用量統計 - 目前資料夾"

#: statusbar/statusbarspaceinfo.cpp:147
#, kde-format
msgid "Disk Usage Statistics - current device"
msgstr "磁碟用量統計 - 目前裝置"

#: statusbar/statusbarspaceinfo.cpp:160
#, kde-format
msgid "Disk Usage Statistics - all devices"
msgstr "磁碟用量統計 - 所有裝置"

#: statusbar/statusbarspaceinfo.cpp:173
#, kde-format
msgid "KDiskFree"
msgstr "KDiskFree 磁碟空間程式"

#: statusbar/statusbarspaceinfo.cpp:199
#, kde-kuit-format
msgctxt "@info"
msgid "<application>Filelight</application> installed successfully."
msgstr "<application>Filelight</application> 已成功安裝。"

#: statusbar/statusbarspaceinfo.cpp:207
#, kde-format
msgctxt "@info:status"
msgid "Installing Filelight…"
msgstr "正在安裝 Filelight…"

#: statusbar/statusbarspaceinfo.cpp:234
#, kde-format
msgctxt "@info:status Free disk space"
msgid "%1 free"
msgstr "剩餘 %1"

#: statusbar/statusbarspaceinfo.cpp:235
#, kde-format
msgctxt "tooltip:status Free disk space"
msgid "%1 free out of %2 (%3% used)"
msgstr "剩下 %1，共 %2（已使用 %3%）"

#: statusbar/statusbarspaceinfo.cpp:237
#, kde-format
msgctxt "@info:tooltip for the free disk space button"
msgid ""
"%1 free out of %2 (%3% used)\n"
"Press to manage disk space usage."
msgstr ""
"剩下 %1，共 %2（已使用 %3%）\n"
"點擊以管理磁碟空間用量。"

#: statusbar/statusbarspaceinfo.cpp:263
#, kde-format
msgctxt "@title"
msgid "Free Up Disk Space"
msgstr "清出磁碟空間"

#. i18n: The new line ("<nl/>") tag is only there to format this text visually pleasing, i.e. to avoid having one very long line.
#: statusbar/statusbarspaceinfo.cpp:275
#, kde-kuit-format
msgctxt "@title"
msgid ""
"<para>Install additional software to view disk usage statistics<nl/>and "
"identify big files and folders.</para>"
msgstr ""
"<para>安裝額外軟體來檢視磁碟用量統計<nl/>並找出巨大檔案與資料夾。</para>"

#: statusbar/statusbarspaceinfo.cpp:284
#, kde-format
msgctxt "@action:button"
msgid "Install Filelight…"
msgstr "安裝 Filelight…"

#: trash/dolphintrash.cpp:73
#, kde-format
msgid "Trash Emptied"
msgstr "已清空垃圾桶"

#: trash/dolphintrash.cpp:74
#, kde-format
msgid "The Trash was emptied."
msgstr "已清空垃圾桶。"

#: userfeedback/placesdatasource.cpp:25
#, kde-format
msgctxt "name of kuserfeedback data source provided by dolphin"
msgid "Places"
msgstr "書籤"

#: userfeedback/placesdatasource.cpp:31
#, kde-format
msgctxt "description of kuserfeedback data source provided by dolphin"
msgid "Count of available Network Shares"
msgstr "可用網路共享資料夾的數量"

#: userfeedback/settingsdatasource.cpp:24
#, kde-format
msgctxt "name of kuserfeedback data source provided by dolphin"
msgid "Settings"
msgstr "設定"

#: userfeedback/settingsdatasource.cpp:29
#, kde-format
msgctxt "description of kuserfeedback data source provided by dolphin"
msgid "A subset of Dolphin settings."
msgstr "設定的一部分。"

#: views/dolphinremoteencoding.cpp:39
#, kde-format
msgid "Select Remote Charset"
msgstr "選擇遠端字元集"

#: views/dolphinremoteencoding.cpp:91
#, kde-format
msgid "Default"
msgstr "預設"

#: views/dolphinremoteencoding.cpp:100
#, kde-format
msgid "Reload"
msgstr "重新載入"

#: views/dolphinview.cpp:655
#, kde-format
msgctxt "@info:status"
msgid "1 folder selected"
msgid_plural "%1 folders selected"
msgstr[0] "已選取 %1 個資料夾"

#: views/dolphinview.cpp:656
#, kde-format
msgctxt "@info:status"
msgid "1 file selected"
msgid_plural "%1 files selected"
msgstr[0] "已選取 %1 個檔案"

#: views/dolphinview.cpp:658
#, kde-format
msgctxt "@info:status"
msgid "1 folder"
msgid_plural "%1 folders"
msgstr[0] "%1 個資料夾"

#: views/dolphinview.cpp:659
#, kde-format
msgctxt "@info:status"
msgid "1 file"
msgid_plural "%1 files"
msgstr[0] "%1 個檔案"

#: views/dolphinview.cpp:663
#, kde-format
msgctxt "@info:status folders, files (size)"
msgid "%1, %2 (%3)"
msgstr "%1，%2（%3）"

#: views/dolphinview.cpp:665
#, kde-format
msgctxt "@info:status files (size)"
msgid "%1 (%2)"
msgstr "%1（%2）"

#: views/dolphinview.cpp:669
#, kde-format
msgctxt "@info:status"
msgid "0 folders, 0 files"
msgstr "0 個資料夾，0 個檔案"

#: views/dolphinview.cpp:885 views/dolphinview.cpp:894
#, kde-format
msgctxt "<filename> copy"
msgid "%1 copy"
msgstr "%1 的複本"

#: views/dolphinview.cpp:1078
#, kde-format
msgid "Are you sure you want to open 1 item?"
msgid_plural "Are you sure you want to open %1 items?"
msgstr[0] "您確定要開啟這 %1 個項目嗎？"

#: views/dolphinview.cpp:1083
#, kde-format
msgctxt "@action:button"
msgid "Open %1 Item"
msgid_plural "Open %1 Items"
msgstr[0] "開啟 %1 個項目"

#: views/dolphinview.cpp:1213
#, kde-format
msgctxt "@action:inmenu"
msgid "Side Padding"
msgstr "側邊填充"

#: views/dolphinview.cpp:1217
#, kde-format
msgctxt "@action:inmenu"
msgid "Automatic Column Widths"
msgstr "自動調整欄位寬度"

#: views/dolphinview.cpp:1222
#, kde-format
msgctxt "@action:inmenu"
msgid "Custom Column Widths"
msgstr "自訂欄位寬度"

#: views/dolphinview.cpp:1828
#, kde-format
msgctxt "@info:status"
msgid "Trash operation completed."
msgstr "移動到垃圾桶已完成。"

#: views/dolphinview.cpp:1838
#, kde-format
msgctxt "@info:status"
msgid "Delete operation completed."
msgstr "刪除已完成。"

#: views/dolphinview.cpp:1994
#, kde-format
msgctxt "@action:button"
msgid "Rename and Hide"
msgstr "重新命名並隱藏"

#: views/dolphinview.cpp:1998
#, kde-format
msgid ""
"Adding a dot to the beginning of this file's name will hide it from view.\n"
"Do you still want to rename it?"
msgstr ""
"在檔案名稱開頭加個點 (.) 會將該檔案從檢視中隱藏。\n"
"仍然重新命名？"

#: views/dolphinview.cpp:2000
#, kde-format
msgid ""
"Adding a dot to the beginning of this folder's name will hide it from view.\n"
"Do you still want to rename it?"
msgstr ""
"在資料夾名稱開頭加個點 (.) 會將該資料夾從檢視中隱藏。\n"
"仍然重新命名？"

#: views/dolphinview.cpp:2002
#, kde-format
msgid "Hide this File?"
msgstr "隱藏此檔案？"

#: views/dolphinview.cpp:2002
#, kde-format
msgid "Hide this Folder?"
msgstr "隱藏這資料夾？"

#: views/dolphinview.cpp:2052
#, kde-format
msgctxt "@info:status"
msgid "The location is empty."
msgstr "此位置是空的。"

#: views/dolphinview.cpp:2054
#, kde-format
msgctxt "@info:status"
msgid "The location '%1' is invalid."
msgstr "此位置 %1 是無效的。"

#: views/dolphinview.cpp:2323
#, kde-format
msgid "Loading…"
msgstr "載入中…"

#: views/dolphinview.cpp:2342
#, kde-format
msgid "Loading canceled"
msgstr "已取消載入"

#: views/dolphinview.cpp:2344
#, kde-format
msgid "No items matching the filter"
msgstr "沒有符合過濾器的項目"

#: views/dolphinview.cpp:2346
#, kde-format
msgid "No items matching the search"
msgstr "沒有符合搜尋的項目"

#: views/dolphinview.cpp:2348
#, kde-format
msgid "Trash is empty"
msgstr "垃圾桶是空的"

#: views/dolphinview.cpp:2351
#, kde-format
msgid "No tags"
msgstr "沒有標籤"

#: views/dolphinview.cpp:2354
#, kde-format
msgid "No files tagged with \"%1\""
msgstr "沒有使用 \"%1\" 標籤的檔案"

#: views/dolphinview.cpp:2358
#, kde-format
msgid "No recently used items"
msgstr "沒有最近使用的項目"

#: views/dolphinview.cpp:2360
#, kde-format
msgid "No shared folders found"
msgstr "找不到共享資料夾"

#: views/dolphinview.cpp:2362
#, kde-format
msgid "No relevant network resources found"
msgstr "找不到有關的網路資源"

#: views/dolphinview.cpp:2364
#, kde-format
msgid "No MTP-compatible devices found"
msgstr "找不到支援 MTP 的裝置"

#: views/dolphinview.cpp:2366
#, kde-format
msgid "No Apple devices found"
msgstr "找不到 Apple 裝置"

#: views/dolphinview.cpp:2368
#, kde-format
msgid "No Bluetooth devices found"
msgstr "找不到藍牙裝置"

#: views/dolphinview.cpp:2370
#, kde-format
msgid "Folder is empty"
msgstr "資料夾是空的"

#: views/dolphinviewactionhandler.cpp:81
#, kde-format
msgctxt "@action"
msgid "Create Folder…"
msgstr "建立資料夾…"

#: views/dolphinviewactionhandler.cpp:91
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This renames the items in your current selection.<nl/>Renaming multiple "
"items at once results in their new names differing only in a number."
msgstr ""
"這會重新命名您所選取的項目。<nl/>同時重新命名多個項目時，它們的新名稱之間將只"
"會有一個數字的差別。"

#: views/dolphinviewactionhandler.cpp:103
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This moves the items in your current selection to the <filename>Trash</"
"filename>.<nl/>The trash is a temporary storage location where items can be "
"deleted later if disk space is needed."
msgstr ""
"這會將您目前所選取的項目移動至 <filename>垃圾桶</filename>。<nl/>垃圾桶是一個"
"暫時的儲存空間，之後如果需要磁碟空間時可以從那刪除項目。"

#: views/dolphinviewactionhandler.cpp:116
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"This deletes the items in your current selection permanently. They cannot be "
"recovered by normal means."
msgstr "這會永久刪除您目前所選取的所有項目。它們將無法透過普通方式復原。"

#: views/dolphinviewactionhandler.cpp:126
#, kde-format
msgctxt "@action \"Move to Trash\" for non-local files, etc."
msgid "Delete (using shortcut for Trash)"
msgstr "刪除（使用垃圾桶的捷徑）"

#: views/dolphinviewactionhandler.cpp:132
#, kde-format
msgctxt "@action:inmenu File"
msgid "Duplicate Here"
msgstr "在此建立複本"

#: views/dolphinviewactionhandler.cpp:140
#, kde-format
msgctxt "@action:inmenu File"
msgid "Properties"
msgstr "屬性"

#: views/dolphinviewactionhandler.cpp:142
#, kde-kuit-format
msgctxt "@info:whatsthis properties"
msgid ""
"This shows a complete list of properties of the currently selected items in "
"a new window.<nl/>If nothing is selected the window will be about the "
"currently viewed folder instead.<nl/>You can configure advanced options "
"there like managing read- and write-permissions."
msgstr ""
"這會在一個新視窗顯示目前選取的項目的完整屬性列表。<nl/>如果沒有選取任何東西，"
"該視窗將會顯示目前檢視的資料夾的屬性。<nl/>您可以在那設定進階選項，例如管理讀"
"取與寫入的權限。"

#: views/dolphinviewactionhandler.cpp:152
#, kde-format
msgctxt "@action:incontextmenu"
msgid "Copy Location"
msgstr "複製位置"

#: views/dolphinviewactionhandler.cpp:153
#, kde-format
msgctxt "@info:whatsthis copy_location"
msgid "This will copy the path of the first selected item into the clipboard."
msgstr "這會將第一個選取的檔案的路徑複製到剪貼簿。"

#: views/dolphinviewactionhandler.cpp:161
#, kde-format
msgctxt "@action:inmenu File"
msgid "Move to Trash…"
msgstr "移到垃圾桶…"

#: views/dolphinviewactionhandler.cpp:162
#, kde-format
msgctxt "@action:inmenu File"
msgid "Delete…"
msgstr "刪除…"

#: views/dolphinviewactionhandler.cpp:163
#, kde-format
msgctxt "@action:inmenu File"
msgid "Duplicate Here…"
msgstr "在此建立複本…"

#: views/dolphinviewactionhandler.cpp:164
#, kde-format
msgctxt "@action:incontextmenu"
msgid "Copy Location…"
msgstr "複製位置…"

#: views/dolphinviewactionhandler.cpp:193
#, kde-kuit-format
msgctxt "@info:whatsthis Icons view mode"
msgid ""
"<para>This switches to a view mode that focuses on the folder and file "
"icons. This mode makes it easy to distinguish folders from files and to "
"detect items with distinctive <emphasis>file types</emphasis>.</para><para> "
"This mode is handy to browse through pictures when the <interface>Preview</"
"interface> option is enabled.</para>"
msgstr ""
"<para>這會切換到注重於資料夾和檔案圖示的檢視模式。在這個模式中很容易分辨檔案"
"和資料夾，也很容易分辨出<emphasis>檔案型態</emphasis>不同的項目。</"
"para><para>啟用<interface>預覽</interface>選項時這個模式很適合用來瀏覽圖片。"
"</para>"

#: views/dolphinviewactionhandler.cpp:200
#, kde-kuit-format
msgctxt "@info:whatsthis Compact view mode"
msgid ""
"<para>This switches to a compact view mode that lists the folders and files "
"in columns with the names beside the icons.</para><para>This helps to give "
"you an overview in folders with many items.</para>"
msgstr ""
"<para>這會切換到簡潔檢視模式，在此模式中資料夾和檔案會以欄位方式顯示，在圖示"
"旁有名稱。</para><para>這對於在有很多項目的資料夾中把握其中內容的概要很有幫"
"助。</para>"

#: views/dolphinviewactionhandler.cpp:204
#, kde-kuit-format
msgctxt "@info:whatsthis Details view mode"
msgid ""
"<para>This switches to a list view mode that focuses on folder and file "
"details.</para><para>Click on a detail in the column header to sort the "
"items by it. Click again to sort the other way around. To select which "
"details should be displayed click the header with the right mouse button.</"
"para><para>You can view the contents of a folder without leaving the current "
"location by clicking the region to the left of it. This way you can view the "
"contents of multiple folders in the same list.</para>"
msgstr ""
"<para>這會切換到列表一個以資料夾與檔案詳細資訊為中心的列表檢視模式。</"
"para><para>點擊資訊的欄位標頭來依該資訊排序項目。再點一次來反轉排序。要選取要"
"顯示哪些資訊，請在標頭上點擊滑鼠右鍵。</para><para>您可以點擊一個資料夾左方區"
"域來檢視它的內容而不離開目前位置。這樣您可以在同一個列表裡檢視多個資料夾的內"
"容。</para>"

#: views/dolphinviewactionhandler.cpp:214
#, kde-format
msgctxt "@action:intoolbar"
msgid "View Mode"
msgstr "檢視模式"

#: views/dolphinviewactionhandler.cpp:222
#, kde-format
msgctxt "@info:whatsthis zoom in"
msgid "This increases the icon size."
msgstr "這會放大圖示。"

#: views/dolphinviewactionhandler.cpp:225
#, kde-format
msgctxt "@action:inmenu View"
msgid "Reset Zoom Level"
msgstr "重設縮放等級"

#: views/dolphinviewactionhandler.cpp:226
#, kde-format
msgid "Zoom To Default"
msgstr "縮放至預設值"

#: views/dolphinviewactionhandler.cpp:227
#, kde-format
msgctxt "@info:whatsthis zoom reset"
msgid "This resets the icon size to default."
msgstr "這會將圖示大小重設回預設值。"

#: views/dolphinviewactionhandler.cpp:233
#, kde-format
msgctxt "@info:whatsthis zoom out"
msgid "This reduces the icon size."
msgstr "這會縮小圖示。"

#: views/dolphinviewactionhandler.cpp:236
#, kde-format
msgctxt "@action:inmenu menu of zoom actions"
msgid "Zoom"
msgstr "縮放"

#: views/dolphinviewactionhandler.cpp:244
#, kde-format
msgctxt "@action:intoolbar"
msgid "Show Previews"
msgstr "顯示預覽"

#: views/dolphinviewactionhandler.cpp:245
#, kde-format
msgctxt "@info"
msgid "Show preview of files and folders"
msgstr "顯示檔案與資料夾的預覽"

#: views/dolphinviewactionhandler.cpp:247
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"When this is enabled, the icons are based on the actual file or folder "
"contents.<nl/>For example the icons of images become scaled down versions of "
"the images."
msgstr ""
"當此選項啟用時圖示會從實際的檔案或資料夾內容產生。<nl/>距離來說，影像的圖示會"
"變成該影像的縮小版。"

#: views/dolphinviewactionhandler.cpp:256
#, kde-format
msgctxt "@action:inmenu Sort"
msgid "Folders First"
msgstr "資料夾優先"

#: views/dolphinviewactionhandler.cpp:260
#, kde-format
msgctxt "@action:inmenu Sort"
msgid "Hidden Files Last"
msgstr "隱藏檔案在最後"

#: views/dolphinviewactionhandler.cpp:268
#, kde-format
msgctxt "@action:inmenu View"
msgid "Sort By"
msgstr "排序依據"

#: views/dolphinviewactionhandler.cpp:303
#, kde-format
msgctxt "@action:inmenu View"
msgid "Show Additional Information"
msgstr "顯示額外資訊"

#: views/dolphinviewactionhandler.cpp:314
#, kde-format
msgctxt "@action:inmenu View"
msgid "Show in Groups"
msgstr "以群組顯示"

#: views/dolphinviewactionhandler.cpp:315
#, kde-format
msgctxt "@info:whatsthis"
msgid "This groups files and folders by their first letter."
msgstr "這會以其第一個字母為檔案與資料夾進行分組。"

#: views/dolphinviewactionhandler.cpp:320
#, kde-format
msgctxt "@action:inmenu View"
msgid "Show Hidden Files"
msgstr "顯示隱藏檔案"

#: views/dolphinviewactionhandler.cpp:322
#, kde-kuit-format
msgctxt "@info:whatsthis"
msgid ""
"<para>When this is enabled, <emphasis>hidden</emphasis> files and folders "
"are visible. They will be displayed semi-transparent.</para><para>Hidden "
"items only differ from normal ones in that their name starts with a dot (\"."
"\"). Typically, there is no need for users to access them, which is why they "
"are hidden.</para><para>Items can also be hidden if their names are listed "
"in a text file named \".hidden\". Files with the \"application/x-trash\" "
"MIME type, such as backup files, can also be hidden by enabling that setting "
"in Configure Dolphin > View > General.</para>"
msgstr ""
"<para>當此選項啟用時會顯示 <emphasis>隱藏的</emphasis> 檔案與資料夾。它們會以"
"半透明方式顯示。</para><para>隱藏項目與普通項目通常唯一差別是它們的檔案名稱以"
"半形句點（\".\"）開頭。通常使用者不需要存取它們，這也是它們為什麼隱藏的原因。"
"</para><para>當項目的名稱列於名為 \".hidden\" 的文字檔案中時，它們也會被隱"
"藏。另外在「設定 Dolphin」→「檢視」→「一般」啟用對應設定時，MIME 類型為 "
"\"application/x-trash\" 的檔案（例如備份檔）也會被隱藏。</para>"

#: views/dolphinviewactionhandler.cpp:336
#, kde-format
msgctxt "@action:inmenu View"
msgid "Adjust View Display Style…"
msgstr "調整檢視顯示方式…"

#: views/dolphinviewactionhandler.cpp:339
#, kde-format
msgctxt "@info:whatsthis"
msgid ""
"This opens a window in which all folder view properties can be adjusted."
msgstr "這會開啟一個可以調整所有資料夾檢視屬性的視窗。"

#: views/dolphinviewactionhandler.cpp:635
#, kde-format
msgctxt "@action:inmenu View Mode"
msgid "Icons"
msgstr "圖示"

#: views/dolphinviewactionhandler.cpp:636
#, kde-format
msgctxt "@info"
msgid "Icons view mode"
msgstr "圖示檢視模式"

#: views/dolphinviewactionhandler.cpp:646
#, kde-format
msgctxt "@action:inmenu View Mode"
msgid "Compact"
msgstr "簡潔模式"

#: views/dolphinviewactionhandler.cpp:647
#, kde-format
msgctxt "@info"
msgid "Compact view mode"
msgstr "簡潔檢視模式"

#: views/dolphinviewactionhandler.cpp:657
#, kde-format
msgctxt "@action:inmenu View Mode"
msgid "Details"
msgstr "詳細模式"

#: views/dolphinviewactionhandler.cpp:658
#, kde-format
msgctxt "@info"
msgid "Details view mode"
msgstr "詳細檢視模式"

#: views/dolphinviewactionhandler.cpp:681
#, kde-format
msgctxt "Sort descending"
msgid "Z-A"
msgstr "Z-A"

#: views/dolphinviewactionhandler.cpp:682
#, kde-format
msgctxt "Sort ascending"
msgid "A-Z"
msgstr "A-Z"

#: views/dolphinviewactionhandler.cpp:684
#, kde-format
msgctxt "Sort descending"
msgid "Largest First"
msgstr "從大到小"

#: views/dolphinviewactionhandler.cpp:685
#, kde-format
msgctxt "Sort ascending"
msgid "Smallest First"
msgstr "從小到大"

#: views/dolphinviewactionhandler.cpp:687
#, kde-format
msgctxt "Sort descending"
msgid "Newest First"
msgstr "從新到舊"

#: views/dolphinviewactionhandler.cpp:688
#, kde-format
msgctxt "Sort ascending"
msgid "Oldest First"
msgstr "從舊到新"

#: views/dolphinviewactionhandler.cpp:690
#, kde-format
msgctxt "Sort descending"
msgid "Highest First"
msgstr "從高到低"

#: views/dolphinviewactionhandler.cpp:691
#, kde-format
msgctxt "Sort ascending"
msgid "Lowest First"
msgstr "從低到高"

#: views/dolphinviewactionhandler.cpp:693
#, kde-format
msgctxt "Sort descending"
msgid "Descending"
msgstr "降冪"

#: views/dolphinviewactionhandler.cpp:694
#, kde-format
msgctxt "Sort ascending"
msgid "Ascending"
msgstr "升冪"

#: views/dolphinviewactionhandler.cpp:792
#, kde-format
msgctxt ""
"@action:inmenu menu with actions like copy, paste, rename. The user's "
"selection is empty when this text is shown."
msgid "Actions for Current View"
msgstr "目前頁面的動作"

#. i18n: @action:inmenu menu with actions like copy, paste, rename.
#. %1 is a textual representation of the currently selected files or folders. This can be the name of
#. the file/files like "file1" or "file1, file2 and file3" or an aggregate like "8 Selected Folders".
#. If this sort of word puzzle can not be correctly translated in your language, translate it as "NULL" (without the quotes)
#. and a fallback will be used.
#: views/dolphinviewactionhandler.cpp:801
#, kde-format
msgid "Actions for %1"
msgstr "%1 的動作"

#: views/dolphinviewactionhandler.cpp:808
#, kde-format
msgctxt ""
"@action:inmenu menu with actions like copy, paste, rename. %1 is the amount "
"of selected files/folders."
msgid "Actions for One Selected Item"
msgid_plural "Actions for %1 Selected Items"
msgstr[0] "%1 個已選項目的動作"

#: views/versioncontrol/versioncontrolobserver.cpp:231
#, kde-format
msgctxt "@info:status"
msgid "Updating version information…"
msgstr "更新版本資訊中…"

#~ msgid "Install Filelight to View Disk Usage Statistics…"
#~ msgstr "安裝 Filelight 來檢視磁碟用量統計…"

#~ msgctxt "@action:button"
#~ msgid "Stop Acting as an Administrator"
#~ msgstr "停止作為管理員進行操作"

#~ msgid "Skip previews for local files above:"
#~ msgstr "本機檔案超過此大小則不預覽："

#~ msgid "No limit"
#~ msgstr "無限制"

#~ msgctxt "@label"
#~ msgid "Skip previews for remote files above:"
#~ msgstr "遠端檔案超過此大小則不預覽："

#~ msgid "No previews"
#~ msgstr "沒有預覽"

#~ msgctxt "@action:inmenu Edit"
#~ msgid "Copy to Inactive Split View"
#~ msgstr "複製到非作用中的分割檢視"

#~ msgctxt "@action:inmenu Edit"
#~ msgid "Move to Inactive Split View"
#~ msgstr "移動到非作用中的分割檢視"

#~ msgctxt "@info:whatsthis find"
#~ msgid ""
#~ "<para>This splits the folder view below into two autonomous views.</"
#~ "para><para>This way you can see two locations at once and move items "
#~ "between them quickly.</para>Click this again afterwards to recombine the "
#~ "views."
#~ msgstr ""
#~ "<para>這會分割下方的資料夾檢視成兩個獨立的檢視。</para><para>這樣您可以同"
#~ "時看到兩個位置，並快速地在它們之間移動項目。</para>再按一次這個來重新合併"
#~ "兩個檢視。"

#~ msgctxt "@action:inmenu"
#~ msgid "Activate Tab %1"
#~ msgstr "跳到第 %1 個分頁"

#~ msgctxt "@action:inmenu"
#~ msgid "Activate Next Tab"
#~ msgstr "跳到下一個分頁"

#~ msgctxt "@action:inmenu"
#~ msgid "Activate Previous Tab"
#~ msgstr "跳到前一個分頁"

#~ msgctxt "@action:intoolbar Move right split view to a new window"
#~ msgid "Pop out"
#~ msgstr "彈出"

#~ msgctxt "@action:intoolbar Move active split view to a new window"
#~ msgid "Pop out"
#~ msgstr "彈出"

#~ msgid "Split the view into two panes"
#~ msgstr "將檢視分割成兩個面板"

#~ msgid "Show tooltips"
#~ msgstr "顯示工具提示"

#~ msgid ""
#~ "When deactivated, turning off split view will close the inactive pane"
#~ msgstr "當停用此功能，關閉「分割檢視」也將關閉未使用中的視窗"

#~ msgctxt "@option:check"
#~ msgid "Show tooltips"
#~ msgstr "顯示工具提示"

#~ msgctxt "option:check"
#~ msgid "Rename inline"
#~ msgstr "重新命名內含項目"

#~ msgid "Whether or not content count is used as directory size"
#~ msgstr "是否將內容記數當作目錄大小使用"

#~ msgctxt "@title:group"
#~ msgid "Folder size displays:"
#~ msgstr "資料夾大小顯示："

#~ msgctxt "@info:status"
#~ msgid "1 File"
#~ msgid_plural "%1 Files"
#~ msgstr[0] "%1 個檔案"

#~ msgid "More Search Tools"
#~ msgstr "更多搜尋工具"

#~ msgctxt "@title:window"
#~ msgid "Configure Preview for %1"
#~ msgstr "%1 的設定預覽"

#~ msgctxt "@title:group"
#~ msgid "Startup"
#~ msgstr "啟動"

#~ msgctxt "@title:group"
#~ msgid "View Modes"
#~ msgstr "檢視模式"

#~ msgctxt "@title:group"
#~ msgid "Navigation"
#~ msgstr "導覽"

#~ msgctxt "@title:group"
#~ msgid "View: "
#~ msgstr "檢視："

#~ msgctxt "@title:group"
#~ msgid "General: "
#~ msgstr "一般："

#~ msgctxt "@option:check Startup Settings"
#~ msgid "Open new folders in tabs"
#~ msgstr "在分頁中開啟新資料夾"

#~ msgctxt "@label:checkbox"
#~ msgid "General:"
#~ msgstr "一般："

#~ msgctxt "@action:inmenu Tools"
#~ msgid "Filter..."
#~ msgstr "過濾器…"

#~ msgid "Search..."
#~ msgstr "搜尋…"

#~ msgctxt "@info:progress"
#~ msgid "Sorting..."
#~ msgstr "排序中..."

#~ msgid "Filter..."
#~ msgstr "過濾器…"

#~ msgctxt "@action:inmenu"
#~ msgid "Configure..."
#~ msgstr "設定..."

#~ msgctxt "@label:textbox"
#~ msgid "Search..."
#~ msgstr "搜尋…"

#~ msgctxt "@info"
#~ msgid "Could not access <filename>%1</filename>."
#~ msgstr "無法存取檔案 <filename>%1</filename>。"

#~ msgid "One or more files on this device are open within an application."
#~ msgstr "裝置上的一或多個檔案會在應用程式內開啟。"

#~ msgid ""
#~ "One or more files on this device are opened in application <application>"
#~ "\"%2\"</application>."
#~ msgid_plural ""
#~ "One or more files on this device are opened in following applications: "
#~ "<application>%2</application>."
#~ msgstr[0] ""
#~ "裝置上的一或多個檔案會在下述應用程式內開啟：<application>%2</"
#~ "application>。"

#~ msgctxt "separator in list of apps blocking device unmount"
#~ msgid ", "
#~ msgstr "、"

#~ msgctxt "@info:credit"
#~ msgid ""
#~ "(C) 2006-2018 Peter Penz, Frank Reininghaus, Emmanuel Pescosta and Elvis "
#~ "Angelaccio"
#~ msgstr ""
#~ "(C) 2006-2018 Peter Penz, Frank Reininghaus, Emmanuel Pescosta 和 Elvis "
#~ "Angelaccio"

#~ msgid "Font family"
#~ msgstr "字型家族"

#~ msgid "Font size"
#~ msgstr "字型大小"

#~ msgid "Italic"
#~ msgstr "斜體"

#~ msgid "Font weight"
#~ msgstr "字型比重"

#~ msgid ""
#~ "Internal version of Dolphin, containing 3 digits for major, minor, bugfix"
#~ msgstr "Dolphin 內部版本，包含三位數：主版號，次版號與修正編號"

#~ msgctxt "@item"
#~ msgid "Eject"
#~ msgstr "退出"

#~ msgctxt "@item"
#~ msgid "Release"
#~ msgstr "放開"

#~ msgctxt "@item"
#~ msgid "Safely Remove"
#~ msgstr "安全地移除"

#~ msgctxt "@item"
#~ msgid "Unmount"
#~ msgstr "卸載"

#~ msgctxt "@info"
#~ msgid "The device '%1' is not a disk and cannot be ejected."
#~ msgstr "裝置 %1 不是光碟機，無法跳出。"

#~ msgctxt "@info"
#~ msgid "An error occurred while accessing '%1', the system responded: %2"
#~ msgstr "存取 %1 時發生錯誤，系統訊息：%2"

#~ msgctxt "@info"
#~ msgid "An error occurred while accessing '%1'"
#~ msgstr "存取 %1 時發生錯誤"

#~ msgctxt "@item:inmenu"
#~ msgid "Open in New Tab"
#~ msgstr "在新分頁開啟"

#~ msgctxt "@item:inmenu"
#~ msgid "Open in New Window"
#~ msgstr "在新視窗開啟"

#~ msgctxt "@action:inmenu"
#~ msgid "Mount"
#~ msgstr "掛載"

#~ msgctxt "@item:inmenu"
#~ msgid "Edit..."
#~ msgstr "編輯..."

#~ msgctxt "@item:inmenu"
#~ msgid "Remove"
#~ msgstr "移除"

#~ msgctxt "@item:inmenu"
#~ msgid "Hide"
#~ msgstr "隱藏"

#~ msgctxt "@item:inmenu"
#~ msgid "Add Entry..."
#~ msgstr "新增項目..."

#~ msgctxt "@item:inmenu"
#~ msgid "Icon Size"
#~ msgstr "圖示大小"

#~ msgctxt "Small icon size"
#~ msgid "Small (%1x%2)"
#~ msgstr "小型 (%1x%2)"

#~ msgctxt "Medium icon size"
#~ msgid "Medium (%1x%2)"
#~ msgstr "中型 (%1x%2)"

#~ msgctxt "Large icon size"
#~ msgid "Large (%1x%2)"
#~ msgstr "大型 (%1x%2)"

#~ msgctxt "Huge icon size"
#~ msgid "Huge (%1x%2)"
#~ msgstr "大型 (%1x%2)"

#~ msgctxt "@item:inmenu"
#~ msgid "Hide Section '%1'"
#~ msgstr "隱藏「%1」部份"

#, fuzzy
#~| msgctxt "@action:inmenu"
#~| msgid "Toggle Search Bar"
#~ msgctxt "@info:tooltip"
#~ msgid "Toggle Filter Bar"
#~ msgstr "切換搜尋列"

#~ msgctxt "@title:window"
#~ msgid "Dolphin Preferences"
#~ msgstr "Dolphin 喜好設定"

#~ msgctxt "@action:inmenu Go"
#~ msgid "Sett&ings"
#~ msgstr "設定(&I)"

#~ msgctxt "@action:intoolbar"
#~ msgid "Control"
#~ msgstr "控制"

#~ msgctxt "@action"
#~ msgid "Show menu"
#~ msgstr "顯示選單"

#~ msgctxt "@title:group"
#~ msgid "Services"
#~ msgstr "服務"

#~ msgctxt "@title"
#~ msgid "Dolphin Part"
#~ msgstr "Dolphin 部件"

#, fuzzy
#~| msgctxt "@title:group"
#~| msgid "Navigation"
#~ msgctxt "@action:inmenu"
#~ msgid "Url Navigator"
#~ msgid_plural "Url Navigators"
#~ msgstr[0] "導覽"

#~ msgctxt "@item:intable"
#~ msgid "Unknown"
#~ msgstr "未知"

#~ msgctxt "@info"
#~ msgid "Visibility of hidden files and folders"
#~ msgstr "隱藏檔案與資料夾的可見度"

#~ msgctxt "@info:status"
#~ msgid "Unknown size"
#~ msgstr "未知的大小"

#~ msgctxt "@label:textbox"
#~ msgid "Start in:"
#~ msgstr "啟動於："

#~ msgctxt "@label:checkbox"
#~ msgid "Window options:"
#~ msgstr "視窗選項："

#~ msgctxt "<file path><filename> copy.<extension>"
#~ msgid "%1%2 copy%3"
#~ msgstr "%1%2 的複本%3"

#~ msgctxt "@action:inmenu Add current folder to places"
#~ msgid "Add '%1' to Places"
#~ msgstr "新增「%1」至書籤"

#~ msgctxt "@title:window"
#~ msgid "Rename Items"
#~ msgstr "重新命名項目"

#~ msgctxt "@label:textbox"
#~ msgid "Rename the item <filename>%1</filename> to:"
#~ msgstr "將項目 %1 重新命名為："

#~ msgctxt "@info:status"
#~ msgid "New name #"
#~ msgstr "新名稱 #"

#~ msgctxt "@label:textbox"
#~ msgid "Rename the %1 selected item to:"
#~ msgid_plural "Rename the %1 selected items to:"
#~ msgstr[0] "將 %1 個選取的項目重新命名為："

#~ msgctxt "@info"
#~ msgid "# will be replaced by ascending numbers starting with:"
#~ msgstr "# 會取代為遞增的數字，由此數字開始："

#~ msgctxt "@title:window"
#~ msgid "View Properties"
#~ msgstr "檢視屬性"

#~ msgid "Show facets widget"
#~ msgstr "顯示多面體元件"

#~ msgctxt "@action:button"
#~ msgid "Fewer Options"
#~ msgstr "較少選項"

#~ msgctxt "@action:button"
#~ msgid "More Options"
#~ msgstr "更多選項"

#~ msgctxt "@info:tooltip"
#~ msgid ""
#~ "Advanced search options are not available because the file indexing "
#~ "service is disabled."
#~ msgstr "因為檔案索引服務已停用，因此無法使用進階搜尋選項。"

#~ msgctxt "@info:tooltip"
#~ msgid ""
#~ "Advanced search options are not available because this location is not "
#~ "indexed."
#~ msgstr "因為尚未索引此位置，因此無法使用進階搜尋選項。"

#~ msgctxt "@info:tooltip"
#~ msgid ""
#~ "Advanced search options are not available because this version of Dolphin "
#~ "does not support the Baloo file indexer."
#~ msgstr ""
#~ "因為此 Dolphin 版本不支援 Baloo 檔案索引工具，因此無法使用進階搜尋選項。"

#~ msgctxt "@option:check"
#~ msgid "Any"
#~ msgstr "任何"

#~ msgctxt "@option:check"
#~ msgid "Folders"
#~ msgstr "資料夾"

#~ msgctxt "@option:option"
#~ msgid "Anytime"
#~ msgstr "任何時間"

#~ msgctxt "@option:option"
#~ msgid "Today"
#~ msgstr "今天"

#~ msgctxt "@option:option"
#~ msgid "Yesterday"
#~ msgstr "昨天"

#~ msgctxt "@option:check Ask for confirmation when"
#~ msgid "Executing scripts or desktop files"
#~ msgstr "執行文稿或桌面檔案時"