/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * RapidIO interconnect services * (RapidIO Interconnect Specification, http://www.rapidio.org) * * Copyright 2005 MontaVista Software, Inc. * Matt Porter */ #ifndef LINUX_RIO_H #define LINUX_RIO_H #include #include #include #include #include #include #include #ifdef CONFIG_RAPIDIO_DMA_ENGINE #include #endif #define RIO_NO_HOPCOUNT -1 #define RIO_INVALID_DESTID 0xffff #define RIO_MAX_MPORTS 8 #define RIO_MAX_MPORT_RESOURCES 16 #define RIO_MAX_DEV_RESOURCES 16 #define RIO_MAX_MPORT_NAME 40 #define RIO_GLOBAL_TABLE 0xff /* Indicates access of a switch's global routing table if it has multiple (or per port) tables */ #define RIO_INVALID_ROUTE 0xff /* Indicates that a route table entry is invalid (no route exists for the device ID) */ #define RIO_MAX_ROUTE_ENTRIES(size) (size ? (1 << 16) : (1 << 8)) #define RIO_ANY_DESTID(size) (size ? 0xffff : 0xff) #define RIO_MAX_MBOX 4 #define RIO_MAX_MSG_SIZE 0x1000 /* * Error values that may be returned by RIO functions. */ #define RIO_SUCCESSFUL 0x00 #define RIO_BAD_SIZE 0x81 /* * For RIO devices, the region numbers are assigned this way: * * 0 RapidIO outbound doorbells * 1-15 RapidIO memory regions * * For RIO master ports, the region number are assigned this way: * * 0 RapidIO inbound doorbells * 1 RapidIO inbound mailboxes * 2 RapidIO outbound mailboxes */ #define RIO_DOORBELL_RESOURCE 0 #define RIO_INB_MBOX_RESOURCE 1 #define RIO_OUTB_MBOX_RESOURCE 2 #define RIO_PW_MSG_SIZE 64 /* * A component tag value (stored in the component tag CSR) is used as device's * unique identifier assigned during enumeration. Besides being used for * identifying switches (which do not have device ID register), it also is used * by error management notification and therefore has to be assigned * to endpoints as well. */ #define RIO_CTAG_RESRVD 0xfffe0000 /* Reserved */ #define RIO_CTAG_UDEVID 0x0001ffff /* Unique device identifier */ extern struct bus_type rio_bus_type; extern struct class rio_mport_class; struct rio_mport; struct rio_dev; union rio_pw_msg; /** * struct rio_switch - RIO switch info * @node: Node in global list of switches * @route_table: Copy of switch routing table * @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0 * @ops: pointer to switch-specific operations * @lock: lock to serialize operations updates * @nextdev: Array of per-port pointers to the next attached device */ struct rio_switch { struct list_head node; u8 *route_table; u32 port_ok; struct rio_switch_ops *ops; spinlock_t lock; struct rio_dev *nextdev[]; }; /** * struct rio_switch_ops - Per-switch operations * @owner: The module owner of this structure * @add_entry: Callback for switch-specific route add function * @get_entry: Callback for switch-specific route get function * @clr_table: Callback for switch-specific clear route table function * @set_domain: Callback for switch-specific domain setting function * @get_domain: Callback for switch-specific domain get function * @em_init: Callback for switch-specific error management init function * @em_handle: Callback for switch-specific error management handler function * * Defines the operations that are necessary to initialize/control * a particular RIO switch device. */ struct rio_switch_ops { struct module *owner; int (*add_entry) (struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 route_port); int (*get_entry) (struct rio_mport *mport, u16 destid, u8 hopcount, u16 table, u16 route_destid, u8 *route_port); int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount, u16 table); int (*set_domain) (struct rio_mport *mport, u16 destid, u8 hopcount, u8 sw_domain); int (*get_domain) (struct rio_mport *mport, u16 destid, u8 hopcount, u8 *sw_domain); int (*em_init) (struct rio_dev *dev); int (*em_handle) (struct rio_dev *dev, u8 swport); }; enum rio_device_state { RIO_DEVICE_INITIALIZING, RIO_DEVICE_RUNNING, RIO_DEVICE_GONE, RIO_DEVICE_SHUTDOWN, }; /** * struct rio_dev - RIO device info * @global_list: Node in list of all RIO devices * @net_list: Node in list of RIO devices in a network * @net: Network this device is a part of * @do_enum: Enumeration flag * @did: Device ID * @vid: Vendor ID * @device_rev: Device revision * @asm_did: Assembly device ID * @asm_vid: Assembly vendor ID * @asm_rev: Assembly revision * @efptr: Extended feature pointer * @pef: Processing element features * @swpinfo: Switch port info * @src_ops: Source operation capabilities * @dst_ops: Destination operation capabilities * @comp_tag: RIO component tag * @phys_efptr: RIO device extended features pointer * @phys_rmap: LP-Serial Register Map Type (1 or 2) * @em_efptr: RIO Error Management features pointer * @dma_mask: Mask of bits of RIO address this device implements * @driver: Driver claiming this device * @dev: Device model device * @riores: RIO resources this device owns * @pwcback: port-write callback function for this device * @destid: Network destination ID (or associated destid for switch) * @hopcount: Hopcount to this device * @prev: Previous RIO device connected to the current one * @state: device state * @rswitch: struct rio_switch (if valid for this device) */ struct rio_dev { struct list_head global_list; /* node in list of all RIO devices */ struct list_head net_list; /* node in per net list */ struct rio_net *net; /* RIO net this device resides in */ bool do_enum; u16 did; u16 vid; u32 device_rev; u16 asm_did; u16 asm_vid; u16 asm_rev; u16 efptr; u32 pef; u32 swpinfo; u32 src_ops; u32 dst_ops; u32 comp_tag; u32 phys_efptr; u32 phys_rmap; u32 em_efptr; u64 dma_mask; struct rio_driver *driver; /* RIO driver claiming this device */ struct device dev; /* LDM device structure */ struct resource riores[RIO_MAX_DEV_RESOURCES]; int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step); u16 destid; u8 hopcount; struct rio_dev *prev; atomic_t state; struct rio_switch rswitch[]; /* RIO switch info */ }; #define rio_dev_g(n) list_entry(n, struct rio_dev, global_list) #define rio_dev_f(n) list_entry(n, struct rio_dev, net_list) #define to_rio_dev(n) container_of(n, struct rio_dev, dev) #define sw_to_rio_dev(n) container_of(n, struct rio_dev, rswitch[0]) #define to_rio_mport(n) container_of(n, struct rio_mport, dev) #define to_rio_net(n) container_of(n, struct rio_net, dev) /** * struct rio_msg - RIO message event * @res: Mailbox resource * @mcback: Message event callback */ struct rio_msg { struct resource *res; void (*mcback) (struct rio_mport * mport, void *dev_id, int mbox, int slot); }; /** * struct rio_dbell - RIO doorbell event * @node: Node in list of doorbell events * @res: Doorbell resource * @dinb: Doorbell event callback * @dev_id: Device specific pointer to pass on event */ struct rio_dbell { struct list_head node; struct resource *res; void (*dinb) (struct rio_mport *mport, void *dev_id, u16 src, u16 dst, u16 info); void *dev_id; }; /** * struct rio_mport - RIO master port info * @dbells: List of doorbell events * @pwrites: List of portwrite events * @node: Node in global list of master ports * @nnode: Node in network list of master ports * @net: RIO net this mport is attached to * @lock: lock to synchronize lists manipulations * @iores: I/O mem resource that this master port interface owns * @riores: RIO resources that this master port interfaces owns * @inb_msg: RIO inbound message event descriptors * @outb_msg: RIO outbound message event descriptors * @host_deviceid: Host device ID associated with this master port * @ops: configuration space functions * @id: Port ID, unique among all ports * @index: Port index, unique among all port interfaces of the same type * @sys_size: RapidIO common transport system size * @phys_efptr: RIO port extended features pointer * @phys_rmap: LP-Serial EFB Register Mapping type (1 or 2). * @name: Port name string * @dev: device structure associated with an mport * @priv: Master port private data * @dma: DMA device associated with mport * @nscan: RapidIO network enumeration/discovery operations * @state: mport device state * @pwe_refcnt: port-write enable ref counter to track enable/disable requests */ struct rio_mport { struct list_head dbells; /* list of doorbell events */ struct list_head pwrites; /* list of portwrite events */ struct list_head node; /* node in global list of ports */ struct list_head nnode; /* node in net list of ports */ struct rio_net *net; /* RIO net this mport is attached to */ struct mutex lock; struct resource iores; struct resource riores[RIO_MAX_MPORT_RESOURCES]; struct rio_msg inb_msg[RIO_MAX_MBOX]; struct rio_msg outb_msg[RIO_MAX_MBOX]; int host_deviceid; /* Host device ID */ struct rio_ops *ops; /* low-level architecture-dependent routines */ unsigned char id; /* port ID, unique among all ports */ unsigned char index; /* port index, unique among all port interfaces of the same type */ unsigned int sys_size; /* RapidIO common transport system size. * 0 - Small size. 256 devices. * 1 - Large size, 65536 devices. */ u32 phys_efptr; u32 phys_rmap; unsigned char name[RIO_MAX_MPORT_NAME]; struct device dev; void *priv; /* Master port private data */ #ifdef CONFIG_RAPIDIO_DMA_ENGINE struct dma_device dma; #endif struct rio_scan *nscan; atomic_t state; unsigned int pwe_refcnt; }; static inline int rio_mport_is_running(struct rio_mport *mport) { return atomic_read(&mport->state) == RIO_DEVICE_RUNNING; } /* * Enumeration/discovery control flags */ #define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ /** * struct rio_net - RIO network info * @node: Node in global list of RIO networks * @devices: List of devices in this network * @switches: List of switches in this network * @mports: List of master ports accessing this network * @hport: Default port for accessing this network * @id: RIO network ID * @dev: Device object * @enum_data: private data specific to a network enumerator * @release: enumerator-specific release callback */ struct rio_net { struct list_head node; /* node in list of networks */ struct list_head devices; /* list of devices in this net */ struct list_head switches; /* list of switches in this net */ struct list_head mports; /* list of ports accessing net */ struct rio_mport *hport; /* primary port for accessing net */ unsigned char id; /* RIO network ID */ struct device dev; void *enum_data; /* private data for enumerator of the network */ void (*release)(struct rio_net *net); }; enum rio_link_speed { RIO_LINK_DOWN = 0, /* SRIO Link not initialized */ RIO_LINK_125 = 1, /* 1.25 GBaud */ RIO_LINK_250 = 2, /* 2.5 GBaud */ RIO_LINK_312 = 3, /* 3.125 GBaud */ RIO_LINK_500 = 4, /* 5.0 GBaud */ RIO_LINK_625 = 5 /* 6.25 GBaud */ }; enum rio_link_width { RIO_LINK_1X = 0, RIO_LINK_1XR = 1, RIO_LINK_2X = 3, RIO_LINK_4X = 2, RIO_LINK_8X = 4, RIO_LINK_16X = 5 }; enum rio_mport_flags { RIO_MPORT_DMA = (1 << 0), /* supports DMA data transfers */ RIO_MPORT_DMA_SG = (1 << 1), /* DMA supports HW SG mode */ RIO_MPORT_IBSG = (1 << 2), /* inbound mapping supports SG */ }; /** * struct rio_mport_attr - RIO mport device attributes * @flags: mport device capability flags * @link_speed: SRIO link speed value (as defined by RapidIO specification) * @link_width: SRIO link width value (as defined by RapidIO specification) * @dma_max_sge: number of SG list entries that can be handled by DMA channel(s) * @dma_max_size: max number of bytes in single DMA transfer (SG entry) * @dma_align: alignment shift for DMA operations (as for other DMA operations) */ struct rio_mport_attr { int flags; int link_speed; int link_width; /* DMA capability info: valid only if RIO_MPORT_DMA flag is set */ int dma_max_sge; int dma_max_size; int dma_align; }; /* Low-level architecture-dependent routines */ /** * struct rio_ops - Low-level RIO configuration space operations * @lcread: Callback to perform local (master port) read of config space. * @lcwrite: Callback to perform local (master port) write of config space. * @cread: Callback to perform network read of config space. * @cwrite: Callback to perform network write of config space. * @dsend: Callback to send a doorbell message. * @pwenable: Callback to enable/disable port-write message handling. * @open_outb_mbox: Callback to initialize outbound mailbox. * @close_outb_mbox: Callback to shut down outbound mailbox. * @open_inb_mbox: Callback to initialize inbound mailbox. * @close_inb_mbox: Callback to shut down inbound mailbox. * @add_outb_message: Callback to add a message to an outbound mailbox queue. * @add_inb_buffer: Callback to add a buffer to an inbound mailbox queue. * @get_inb_message: Callback to get a message from an inbound mailbox queue. * @map_inb: Callback to map RapidIO address region into local memory space. * @unmap_inb: Callback to unmap RapidIO address region mapped with map_inb(). * @query_mport: Callback to query mport device attributes. * @map_outb: Callback to map outbound address region into local memory space. * @unmap_outb: Callback to unmap outbound RapidIO address region. */ struct rio_ops { int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len, u32 *data); int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len, u32 data); int (*cread) (struct rio_mport *mport, int index, u16 destid, u8 hopcount, u32 offset, int len, u32 *data); int (*cwrite) (struct rio_mport *mport, int index, u16 destid, u8 hopcount, u32 offset, int len, u32 data); int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data); int (*pwenable) (struct rio_mport *mport, int enable); int (*open_outb_mbox)(struct rio_mport *mport, void *dev_id, int mbox, int entries); void (*close_outb_mbox)(struct rio_mport *mport, int mbox); int (*open_inb_mbox)(struct rio_mport *mport, void *dev_id, int mbox, int entries); void (*close_inb_mbox)(struct rio_mport *mport, int mbox); int (*add_outb_message)(struct rio_mport *mport, struct rio_dev *rdev, int mbox, void *buffer, size_t len); int (*add_inb_buffer)(struct rio_mport *mport, int mbox, void *buf); void *(*get_inb_message)(struct rio_mport *mport, int mbox); int (*map_inb)(struct rio_mport *mport, dma_addr_t lstart, u64 rstart, u64 size, u32 flags); void (*unmap_inb)(struct rio_mport *mport, dma_addr_t lstart); int (*query_mport)(struct rio_mport *mport, struct rio_mport_attr *attr); int (*map_outb)(struct rio_mport *mport, u16 destid, u64 rstart, u32 size, u32 flags, dma_addr_t *laddr); void (*unmap_outb)(struct rio_mport *mport, u16 destid, u64 rstart); }; #define RIO_RESOURCE_MEM 0x00000100 #define RIO_RESOURCE_DOORBELL 0x00000200 #define RIO_RESOURCE_MAILBOX 0x00000400 #define RIO_RESOURCE_CACHEABLE 0x00010000 #define RIO_RESOURCE_PCI 0x00020000 #define RIO_RESOURCE_BUSY 0x80000000 /** * struct rio_driver - RIO driver info * @node: Node in list of drivers * @name: RIO driver name * @id_table: RIO device ids to be associated with this driver * @probe: RIO device inserted * @remove: RIO device removed * @shutdown: shutdown notification callback * @suspend: RIO device suspended * @resume: RIO device awakened * @enable_wake: RIO device enable wake event * @driver: LDM driver struct * * Provides info on a RIO device driver for insertion/removal and * power management purposes. */ struct rio_driver { struct list_head node; char *name; const struct rio_device_id *id_table; int (*probe) (struct rio_dev * dev, const struct rio_device_id * id); void (*remove) (struct rio_dev * dev); void (*shutdown)(struct rio_dev *dev); int (*suspend) (struct rio_dev * dev, u32 state); int (*resume) (struct rio_dev * dev); int (*enable_wake) (struct rio_dev * dev, u32 state, int enable); struct device_driver driver; }; #define to_rio_driver(drv) container_of_const(drv,struct rio_driver, driver) union rio_pw_msg { struct { u32 comptag; /* Component Tag CSR */ u32 errdetect; /* Port N Error Detect CSR */ u32 is_port; /* Implementation specific + PortID */ u32 ltlerrdet; /* LTL Error Detect CSR */ u32 padding[12]; } em; u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)]; }; #ifdef CONFIG_RAPIDIO_DMA_ENGINE /* * enum rio_write_type - RIO write transaction types used in DMA transfers * * Note: RapidIO specification defines write (NWRITE) and * write-with-response (NWRITE_R) data transfer operations. * Existing DMA controllers that service RapidIO may use one of these operations * for entire data transfer or their combination with only the last data packet * requires response. */ enum rio_write_type { RDW_DEFAULT, /* default method used by DMA driver */ RDW_ALL_NWRITE, /* all packets use NWRITE */ RDW_ALL_NWRITE_R, /* all packets use NWRITE_R */ RDW_LAST_NWRITE_R, /* last packet uses NWRITE_R, others - NWRITE */ }; struct rio_dma_ext { u16 destid; u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */ u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */ enum rio_write_type wr_type; /* preferred RIO write operation type */ }; struct rio_dma_data { /* Local data (as scatterlist) */ struct scatterlist *sg; /* I/O scatter list */ unsigned int sg_len; /* size of scatter list */ /* Remote device address (flat buffer) */ u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */ u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */ enum rio_write_type wr_type; /* preferred RIO write operation type */ }; static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) { return container_of(ddev, struct rio_mport, dma); } #endif /* CONFIG_RAPIDIO_DMA_ENGINE */ /** * struct rio_scan - RIO enumeration and discovery operations * @owner: The module owner of this structure * @enumerate: Callback to perform RapidIO fabric enumeration. * @discover: Callback to perform RapidIO fabric discovery. */ struct rio_scan { struct module *owner; int (*enumerate)(struct rio_mport *mport, u32 flags); int (*discover)(struct rio_mport *mport, u32 flags); }; /** * struct rio_scan_node - list node to register RapidIO enumeration and * discovery methods with RapidIO core. * @mport_id: ID of an mport (net) serviced by this enumerator * @node: node in global list of registered enumerators * @ops: RIO enumeration and discovery operations */ struct rio_scan_node { int mport_id; struct list_head node; struct rio_scan *ops; }; /* Architecture and hardware-specific functions */ extern int rio_mport_initialize(struct rio_mport *); extern int rio_register_mport(struct rio_mport *); extern int rio_unregister_mport(struct rio_mport *); extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); extern void rio_close_inb_mbox(struct rio_mport *, int); extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int); extern void rio_close_outb_mbox(struct rio_mport *, int); extern int rio_query_mport(struct rio_mport *port, struct rio_mport_attr *mport_attr); #endif /* LINUX_RIO_H */