// SPDX-License-Identifier: GPL-2.0-only /* // Copyright (c) 2022 Pengutronix, Oleksij Rempel */ #ifndef _LINUX_PSE_CONTROLLER_H #define _LINUX_PSE_CONTROLLER_H #include #include #include /* Maximum current in uA according to IEEE 802.3-2022 Table 145-1 */ #define MAX_PI_CURRENT 1920000 struct phy_device; struct pse_controller_dev; /** * struct pse_control_config - PSE control/channel configuration. * * @podl_admin_control: set PoDL PSE admin control as described in * IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl * @c33_admin_control: set PSE admin control as described in * IEEE 802.3-2022 30.9.1.2.1 acPSEAdminControl */ struct pse_control_config { enum ethtool_podl_pse_admin_state podl_admin_control; enum ethtool_c33_pse_admin_state c33_admin_control; }; /** * struct pse_control_status - PSE control/channel status. * * @podl_admin_state: operational state of the PoDL PSE * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState * @podl_pw_status: power detection status of the PoDL PSE. * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: * @c33_admin_state: operational state of the PSE * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState * @c33_pw_status: power detection status of the PSE. * IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus: * @c33_pw_class: detected class of a powered PD * IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification * @c33_actual_pw: power currently delivered by the PSE in mW * IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower * @c33_ext_state_info: extended state information of the PSE * @c33_avail_pw_limit: available power limit of the PSE in mW * IEEE 802.3-2022 145.2.5.4 pse_avail_pwr * @c33_pw_limit_ranges: supported power limit configuration range. The driver * is in charge of the memory allocation. * @c33_pw_limit_nb_ranges: number of supported power limit configuration * ranges */ struct pse_control_status { enum ethtool_podl_pse_admin_state podl_admin_state; enum ethtool_podl_pse_pw_d_status podl_pw_status; enum ethtool_c33_pse_admin_state c33_admin_state; enum ethtool_c33_pse_pw_d_status c33_pw_status; u32 c33_pw_class; u32 c33_actual_pw; struct ethtool_c33_pse_ext_state_info c33_ext_state_info; u32 c33_avail_pw_limit; struct ethtool_c33_pse_pw_limit_range *c33_pw_limit_ranges; u32 c33_pw_limit_nb_ranges; }; /** * struct pse_controller_ops - PSE controller driver callbacks * * @ethtool_get_status: get PSE control status for ethtool interface * @setup_pi_matrix: setup PI matrix of the PSE controller * @pi_is_enabled: Return 1 if the PSE PI is enabled, 0 if not. * May also return negative errno. * @pi_enable: Configure the PSE PI as enabled. * @pi_disable: Configure the PSE PI as disabled. * @pi_get_voltage: Return voltage similarly to get_voltage regulator * callback. * @pi_get_current_limit: Get the configured current limit similarly to * get_current_limit regulator callback. * @pi_set_current_limit: Configure the current limit similarly to * set_current_limit regulator callback. * Should not return an error in case of MAX_PI_CURRENT * current value set. */ struct pse_controller_ops { int (*ethtool_get_status)(struct pse_controller_dev *pcdev, unsigned long id, struct netlink_ext_ack *extack, struct pse_control_status *status); int (*setup_pi_matrix)(struct pse_controller_dev *pcdev); int (*pi_is_enabled)(struct pse_controller_dev *pcdev, int id); int (*pi_enable)(struct pse_controller_dev *pcdev, int id); int (*pi_disable)(struct pse_controller_dev *pcdev, int id); int (*pi_get_voltage)(struct pse_controller_dev *pcdev, int id); int (*pi_get_current_limit)(struct pse_controller_dev *pcdev, int id); int (*pi_set_current_limit)(struct pse_controller_dev *pcdev, int id, int max_uA); }; struct module; struct device_node; struct of_phandle_args; struct pse_control; /* PSE PI pairset pinout can either be Alternative A or Alternative B */ enum pse_pi_pairset_pinout { ALTERNATIVE_A, ALTERNATIVE_B, }; /** * struct pse_pi_pairset - PSE PI pairset entity describing the pinout * alternative ant its phandle * * @pinout: description of the pinout alternative * @np: device node pointer describing the pairset phandle */ struct pse_pi_pairset { enum pse_pi_pairset_pinout pinout; struct device_node *np; }; /** * struct pse_pi - PSE PI (Power Interface) entity as described in * IEEE 802.3-2022 145.2.4 * * @pairset: table of the PSE PI pinout alternative for the two pairset * @np: device node pointer of the PSE PI node * @rdev: regulator represented by the PSE PI * @admin_state_enabled: PI enabled state */ struct pse_pi { struct pse_pi_pairset pairset[2]; struct device_node *np; struct regulator_dev *rdev; bool admin_state_enabled; }; /** * struct pse_controller_dev - PSE controller entity that might * provide multiple PSE controls * @ops: a pointer to device specific struct pse_controller_ops * @owner: kernel module of the PSE controller driver * @list: internal list of PSE controller devices * @pse_control_head: head of internal list of requested PSE controls * @dev: corresponding driver model device struct * @of_pse_n_cells: number of cells in PSE line specifiers * @nr_lines: number of PSE controls in this controller device * @lock: Mutex for serialization access to the PSE controller * @types: types of the PSE controller * @pi: table of PSE PIs described in this controller device * @no_of_pse_pi: flag set if the pse_pis devicetree node is not used */ struct pse_controller_dev { const struct pse_controller_ops *ops; struct module *owner; struct list_head list; struct list_head pse_control_head; struct device *dev; int of_pse_n_cells; unsigned int nr_lines; struct mutex lock; enum ethtool_pse_types types; struct pse_pi *pi; bool no_of_pse_pi; }; #if IS_ENABLED(CONFIG_PSE_CONTROLLER) int pse_controller_register(struct pse_controller_dev *pcdev); void pse_controller_unregister(struct pse_controller_dev *pcdev); struct device; int devm_pse_controller_register(struct device *dev, struct pse_controller_dev *pcdev); struct pse_control *of_pse_control_get(struct device_node *node); void pse_control_put(struct pse_control *psec); int pse_ethtool_get_status(struct pse_control *psec, struct netlink_ext_ack *extack, struct pse_control_status *status); int pse_ethtool_set_config(struct pse_control *psec, struct netlink_ext_ack *extack, const struct pse_control_config *config); int pse_ethtool_set_pw_limit(struct pse_control *psec, struct netlink_ext_ack *extack, const unsigned int pw_limit); int pse_ethtool_get_pw_limit(struct pse_control *psec, struct netlink_ext_ack *extack); bool pse_has_podl(struct pse_control *psec); bool pse_has_c33(struct pse_control *psec); #else static inline struct pse_control *of_pse_control_get(struct device_node *node) { return ERR_PTR(-ENOENT); } static inline void pse_control_put(struct pse_control *psec) { } static inline int pse_ethtool_get_status(struct pse_control *psec, struct netlink_ext_ack *extack, struct pse_control_status *status) { return -EOPNOTSUPP; } static inline int pse_ethtool_set_config(struct pse_control *psec, struct netlink_ext_ack *extack, const struct pse_control_config *config) { return -EOPNOTSUPP; } static inline int pse_ethtool_set_pw_limit(struct pse_control *psec, struct netlink_ext_ack *extack, const unsigned int pw_limit) { return -EOPNOTSUPP; } static inline int pse_ethtool_get_pw_limit(struct pse_control *psec, struct netlink_ext_ack *extack) { return -EOPNOTSUPP; } static inline bool pse_has_podl(struct pse_control *psec) { return false; } static inline bool pse_has_c33(struct pse_control *psec) { return false; } #endif #endif