# Hey Emacs this is a -*- makefile-*-

PACKAGE_NAME	= kexec-tools
PACKAGE_VERSION	= 2.0.27

prefix		= /usr/local
exec_prefix	= ${prefix}

bindir		= ${exec_prefix}/bin
sbindir		= ${exec_prefix}/sbin
libexecdir	= ${exec_prefix}/libexec
datadir		= ${datarootdir}
datarootdir	= ${prefix}/share
sysconfdir	= ${prefix}/etc
sharedstatedir	= ${prefix}/com
localstatedir	= ${prefix}/var
libdir		= ${exec_prefix}/lib
infodir		= ${datarootdir}/info
mandir		= ${datarootdir}/man
includedir	= ${prefix}/include


# The target architecture
ARCH		= arm64
SUBARCH		= 
OBJDIR		= /home/swadmin/jenkins/workspace/prolinux-2-embedded-dev-arm64/build/kexec-tools/objdir-aarch64-linux-musl
target		= aarch64-unknown-linux-musl
host		= aarch64-unknown-linux-musl

# Compiler for building kexec
CC		= /home/swadmin/aarch64-linux-musl-native/bin/gcc
CPP		= /home/swadmin/aarch64-linux-musl-native/bin/gcc -E
LD		= ld
AS		= as
OBJCOPY		= objcopy
AR		= ar

# C compiler for binaries to run during the build
BUILD_CC	= gcc
BUILD_CFLAGS	= -O2 -Wall
TARGET_CC	= /home/swadmin/aarch64-linux-musl-native/bin/gcc
TARGET_LD	= ld
TARGET_CFLAGS	= -O2 -Wall


# Base compiler flags. These are extended by the subcomponent-Makefiles
# where necessary.
CPPFLAGS	=  -I$(srcdir)/include -I$(srcdir)/util_lib/include \
			-Iinclude/ $($(ARCH)_CPPFLAGS)
CFLAGS		= -g -O2 -fno-strict-aliasing -Wall -Wstrict-prototypes
PURGATORY_EXTRA_CFLAGS = -fno-zero-initialized-in-bss
ASFLAGS		=  $($(ARCH)_ASFLAGS)
LDFLAGS		= 
LIBS		= 

# Utilities called by the makefiles
INSTALL		= /usr/bin/install -c
CHMOD		= chmod
CD		= cd
MKDIR		= mkdir
RM		= rm
CP		= cp
LN		= ln
TAR		= tar
RPMBUILD	= no
SED		= sed
FIND		= find
XARGS		= xargs
DIRNAME		= dirname
STRIP		= strip


pkgdatadir = $(datadir)/$(PACKAGE_NAME)
pkglibdir = $(libdir)/$(PACKAGE_NAME)
pkgincludedir = $(includedir)/$(PACKAGE_NAME)

# You can specify DESTDIR on the command line to do a add
# a prefix to the install so it doesn't really happen
# Useful for building binary packages
DESTDIR =

srcdir		= .
VPATH		= .

# install paths
BUILD_PREFIX:=build
SBINDIR=$(BUILD_PREFIX)/sbin
BINDIR=$(BUILD_PREFIX)/bin
LIBEXECDIR=$(BUILD_PREFIX)/libexec
DATADIR=$(BUILD_PREFIX)/share
SYSCONFDIR=$(BUILD_PREFIX)/etc
SHAREDSTATEDIR=$(BUILD_PREFIX)/com
LOCALSTATEDIR=$(BUILD_PREFIX)/var
LIBDIR=$(BUILD_PREFIX)/lib
INFODIR=$(BUILD_PREFIX)/info
MANDIR=$(BUILD_PREFIX)/man
MAN1DIR=$(MANDIR)/man1
MAN2DIR=$(MANDIR)/man2
MAN3DIR=$(MANDIR)/man3
MAN4DIR=$(MANDIR)/man4
MAN5DIR=$(MANDIR)/man5
MAN6DIR=$(MANDIR)/man6
MAN7DIR=$(MANDIR)/man7
MAN8DIR=$(MANDIR)/man8
INCLUDEDIR=$(BUILD_PREFIX)/include

PKGDATADIR=$(DATADIR)/$(PACKAGE_NAME)
PKGLIBDIR=$(LIBDIR)/$(PACKAGE_NAME)
PKGINCLUDEIR=$(INCLUDEDIR)/$(PACKAGE_NAME)

ALLOWED_UNINSTALL_DIRS := \
	$(SBINDIR) \
	$(sbindir) $(bindir) $(libexecdir) $(datadir) $(sysconfdir) \
	$(sharedstatedir) $(localstatedir) $(libdir) $(infodir) \
	$(mandir)/man1 $(mandir)/man2 $(mandir)/man3 $(mandir)/man4 \
	$(mandir)/man5 $(mandir)/man6 $(mandir)/man7 $(mandir)/man8 \
	$(includedir) $(pkgdatadir) $(pkglibdir) $(pkgincludedir)

all: targets

# generic build rules
%.o: %.c
	@$(MKDIR) -p $(@D)
	$(COMPILE.c) -MD -o $@ $<

%.o: %.S
	@$(MKDIR) -p $(@D)
	$(COMPILE.S) -MD -o $@ $<

# collect objects to be removed in 'make clean'
clean =

dist =	AUTHORS COPYING INSTALL News TODO Makefile.in configure.ac configure \
	kexec-tools.spec.in config/

# utility function for converting a list of files (with extension) to
# file.o (or file.d) format.
objify = $(addsuffix .o, $(basename $(1)))
depify = $(addsuffix .d, $(basename $(1)))

# Documentation
#
include $(srcdir)/doc/Makefile

# Headers
#
include $(srcdir)/include/Makefile

# Utility function library
#
include $(srcdir)/util_lib/Makefile

#
# Stand alone utilities
#
include $(srcdir)/util/Makefile

#
# purgatory (code between kernels)
#
include $(srcdir)/purgatory/Makefile

#
# kexec (linux booting linux)
#
include $(srcdir)/kexec/Makefile

# vmcore-dmesg (read dmesg from a vmcore)
#
include $(srcdir)/vmcore-dmesg/Makefile

#
# kexec_test (test program)
#
include $(srcdir)/kexec_test/Makefile

SPEC=$(PACKAGE_NAME).spec
GENERATED_SRCS:= $(SPEC)
TARBALL=$(PACKAGE_NAME)-$(PACKAGE_VERSION).tar
TARBALL.gz=$(TARBALL).gz
SRCS:= $(dist)
PSRCS:=$(foreach s, $(SRCS), $(PACKAGE_NAME)-$(PACKAGE_VERSION)/$(s))
PGSRCS:=$(foreach s, $(GENERATED_SRCS), $(PACKAGE_NAME)-$(PACKAGE_VERSION)/$(s))

MAN_PAGES:=$(KEXEC_MANPAGE) $(VMCORE_DMESG_MANPAGE)
BINARIES_i386:=$(KEXEC_TEST)
BINARIES_x86_64:=$(KEXEC_TEST)
BINARIES:=$(KEXEC) $(VMCORE_DMESG) $(BINARIES_$(ARCH))

UNINSTALL_KDUMP = $(sbindir)/kdump
UNINSTALL_KDUMP_MANPAGE = $(mandir)/man8/kdump.8
UNINSTALL_KEXEC = $(sbindir)/kexec
UNINSTALL_KEXEC_MANPAGE = $(mandir)/man8/kexec.8
UNINSTALL_KEXEC_TEST = $(pkglibdir)/kexec_test
UNINSTALL_VMCORE_DMESG = $(sbindir)/vmcore-dmesg
UNINSTALL_VMCORE_DMESG_MANPAGE = $(mandir)/man8/vmcore-dmesg.8

TARGETS:=$(BINARIES) $(MAN_PAGES)
targets: $(TARGETS)

UNINSTALL_TARGETS_i386:=$(UNINSTALL_KEXEC_TEST)
UNINSTALL_TARGETS_x86_64:=$(UNINSTALL_KEXEC_TEST)
UNINSTALL_TARGETS:=$(UNINSTALL_KDUMP) $(UNINSTALL_KDUMP_MANPAGE) \
		   $(UNINSTALL_KEXEC) $(UNINSTALL_KEXEC_MANPAGE) \
		   $(UNINSTALL_VMCORE_DMESG) $(UNINSTALL_VMCORE_DMESG_MANPAGE) \
		   $(UNINSTALL_TARGETS_$(ARCH))
uninstall-targets: $(UNINSTALL_TARGETS)

Makefile: Makefile.in config.status
	./config.status

configure: configure.ac
	cd $(srcdir) && autoheader && autoconf && rm -rf autom4te.cache

dist: tarball

tarball: $(TARBALL.gz)

$(TARBALL): $(SRCS) $(GENERATED_SRCS)
	[ ! -d $(PACKAGE_NAME)-$(PACKAGE_VERSION) ] || \
	        $(CHMOD) u+w $(PACKAGE_NAME)-$(PACKAGE_VERSION)
	$(RM) -rf $(PACKAGE_NAME)-$(PACKAGE_VERSION)
	$(MKDIR) $(PACKAGE_NAME)-$(PACKAGE_VERSION)
	$(TAR) -c $(SRCS) $(GENERATED_SRCS) | \
	        $(TAR) -C $(PACKAGE_NAME)-$(PACKAGE_VERSION) -x
	$(TAR) -cf $@ $(PSRCS)
	$(TAR) -rf $@ $(PGSRCS)
	$(RM) -rf $(PACKAGE_NAME)-$(PACKAGE_VERSION)

$(TARBALL.gz): $(TARBALL)
	gzip -c < $^ > $@

rpm: $(TARBALL.gz)
	unset MAKEFLAGS MAKELEVEL;
	$(RPMBUILD) -ta $(TARBALL.gz)

$(SPEC): kexec-tools.spec.in Makefile
	$(SED) -e 's,^Version: $$,Version: $(PACKAGE_VERSION),' $< > $@

echo::
	@echo ARCH=$(ARCH)
	@echo BINARIES=$(BINARIES)
	@echo TARGETS=$(TARGETS)
	@echo UNINSTALL_TARGETS=$(UNINSTALL_TARGETS)
	@echo CC=$(CC)
	@echo AR=$(AR)
	@echo LD=$(LD)
	@echo STRIP=$(STRIP)

clean:
	$(RM) -f $(clean)
	$(RM) -rf build
	$(RM) -f $(TARBALL) $(TARBALL.gz)

distclean: dist-clean

dist-clean: clean
	$(RM) -f config.log config.status config.cache Makefile include/config.h
	$(RM) -f include/config.h.in configure $(SPEC)
	$(RM) -rf autom4te.cache

distuninstallcheck:
	FOUND=$$(find $(distuninstallcheck_dir) ! -type d) && \
		[ -z "$$FOUND" ] || { \
			echo "Unexpeced files found after uninstall:" && \
			echo "$$FOUND" && \
			exit 1; }

distcheck: $(TARBALL)
	[ ! -d $(PACKAGE_NAME)-$(PACKAGE_VERSION) ] || \
	        $(CHMOD) u+w $(PACKAGE_NAME)-$(PACKAGE_VERSION)
	$(RM) -rf $(PACKAGE_NAME)-$(PACKAGE_VERSION)
	$(TAR) -xf $(TARBALL)
	$(MKDIR) $(PACKAGE_NAME)-$(PACKAGE_VERSION)/_build \
	         $(PACKAGE_NAME)-$(PACKAGE_VERSION)/_build/sub \
	         $(PACKAGE_NAME)-$(PACKAGE_VERSION)/_inst \
	         $(PACKAGE_NAME)-$(PACKAGE_VERSION)/_dest
	$(CHMOD) a-w $(PACKAGE_NAME)-$(PACKAGE_VERSION)
	test -d $(PACKAGE_NAME)-$(PACKAGE_VERSION)/_build
	INSTALL_BASE=$$($(CD) $(PACKAGE_NAME)-$(PACKAGE_VERSION)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,') &&\
		DESTDIR="$(PACKAGE_NAME)-$(PACKAGE_VERSION)/_dest" && \
		$(CD) $(PACKAGE_NAME)-$(PACKAGE_VERSION)/_build/sub && \
			../../configure \
			$(DISTCHECK_CONFIGURE_FLAGS) \
			--srcdir=../.. --prefix="$$INSTALL_BASE" && \
		$(MAKE) $(AM_MAKEFLAGS) && \
		$(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" install && \
		$(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$DESTDIR" uninstall && \
		$(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$DESTDIR" \
			distuninstallcheck
	$(CHMOD) u+w $(PACKAGE_NAME)-$(PACKAGE_VERSION)
	$(RM) -rf $(PACKAGE_NAME)-$(PACKAGE_VERSION)

install: $(TARGETS)
	for file in $(TARGETS) ; do \
		if test `$(DIRNAME) $$file` =     "$(SBINDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(sbindir)/; \
			$(INSTALL) -m 755  $$file $(DESTDIR)/$(sbindir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(BINDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(bindir)/; \
			$(INSTALL) -m 755 $$file $(DESTDIR)/$(bindir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(LIBEXECDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(libexecdir)/; \
			$(INSTALL) -m 755 $$file $(DESTDIR)/$(libexecdir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(DATADIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(datadir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(datadir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(SYSCONFDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(sysconfdir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(sysconfdir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(SHAREDSTATEDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(sharedstatedir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(sharedstatedir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(LOCALSTATEDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(localstatedir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(localstatedir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(LIBDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(libdir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(libdir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(INFODIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(infodir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(infodir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(MAN1DIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(mandir)/man1; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man1; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(MAN2DIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(mandir)/man2; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man2; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(MAN3DIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(mandir)/man3/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man3/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(MAN4DIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(mandir)/man4/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man4/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(MAN5DIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(mandir)/man5/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man5/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(MAN6DIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(mandir)/man6/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man6/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(MAN7DIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(mandir)/man7/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man7/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(MAN8DIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(mandir)/man8/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man8/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(INCLUDEDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(includedir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(includedir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(PKGDATADIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(pkgdatadir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkgdatadir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(PKGLIBDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(pkglibdir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkglibdir)/; \
		fi; \
		if test `$(DIRNAME) $$file` =     "$(PKGINCLUDEDIR)" ; then \
			$(MKDIR) -p     $(DESTDIR)/$(pkgincludedir)/; \
			$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkgincludedir)/; \
		fi; \
	done

uninstall:
	UINSTALL_LIST='$(UNINSTALL_TARGETS)'; \
	for file in $$UINSTALL_LIST ; do \
		DIRS='$(ALLOWED_UNINSTALL_DIRS)'; \
		for dir in $$DIRS ; do \
			if test `$(DIRNAME) $$file` = "$$dir" ; then \
				rm -rf $(DESTDIR)/$$file ; \
				break ; \
			fi; \
		done; \
	done

.PHONY: echo install uninstall distuninstallcheck all targets \
	uninstall-targets clean dist-clean distclean distcheck \
	maintainer-clean maintainerclean dist tarball rpm