The touchscreen driver expects to have firmware available immediately, but our rootfs
mounts a little too late. These patches are necessary to compile it as a module.
saved_command_line isn't exposed to modules, so we just hardcode the tianma vendor.

diff --git a/drivers/input/touchscreen/nt36xxx_spi_bbb/Kconfig b/drivers/input/touchscreen/nt36xxx_spi_bbb/Kconfig
index e8674dc6a..14ccef8e7 100644
--- a/drivers/input/touchscreen/nt36xxx_spi_bbb/Kconfig
+++ b/drivers/input/touchscreen/nt36xxx_spi_bbb/Kconfig
@@ -12,7 +12,7 @@ config TOUCHSCREEN_NT36xxx_HOSTDL_SPI_BBB
 	  If unsure, say N.
 
 config TOUCHSCREEN_NT36xxx_HOSTDL_SPI_CCC
-	bool "Novatek NT36xxx host download SPI driver"
+	tristate "Novatek NT36xxx host download SPI driver"
 	depends on ( SPI || TOUCHSCREEN_AAAAAA_CCC )
 	default n
 	help

diff --git a/drivers/input/touchscreen/nt36xxx_spi_bbb/Makefile b/drivers/input/touchscreen/nt36xxx_spi_bbb/Makefile
index bca7b8a85..9ca3cfc3d 100644
--- a/drivers/input/touchscreen/nt36xxx_spi_bbb/Makefile
+++ b/drivers/input/touchscreen/nt36xxx_spi_bbb/Makefile
@@ -5,4 +5,5 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_TOUCHSCREEN_NT36xxx_HOSTDL_SPI_BBB) += nt36xxx.o nt36xxx_fw_update.o nt36xxx_ext_proc.o nt36xxx_mp_ctrlram.o
-obj-$(CONFIG_TOUCHSCREEN_NT36xxx_HOSTDL_SPI_CCC) += nt36xxx.o nt36xxx_fw_update.o nt36xxx_ext_proc.o nt36xxx_mp_ctrlram.o
+obj-$(CONFIG_TOUCHSCREEN_NT36xxx_HOSTDL_SPI_CCC) += ts_nt36xxx.o
+ts_nt36xxx-y := nt36xxx.o nt36xxx_fw_update.o nt36xxx_ext_proc.o nt36xxx_mp_ctrlram.o

diff --git a/drivers/input/touchscreen/nt36xxx_spi_bbb/nt36xxx.c b/drivers/input/touchscreen/nt36xxx_spi_bbb/nt36xxx.c
index 93f4d0b1c..f48d3fc7b 100644
--- a/drivers/input/touchscreen/nt36xxx_spi_bbb/nt36xxx.c
+++ b/drivers/input/touchscreen/nt36xxx_spi_bbb/nt36xxx.c
@@ -43,8 +43,6 @@
 #endif /* #if NVT_TOUCH_ESD_PROTECT */
 
 #ifdef CHECK_TOUCH_VENDOR
-extern char *saved_command_line;
-
 //---Touch Vendor ID---
 static uint8_t touch_vendor_id = 0;
 #endif
@@ -2711,31 +2709,8 @@ static int32_t __init nvt_driver_init(void)
 
 #ifdef CHECK_TOUCH_VENDOR
 	//Check TP vendor
-	if (IS_ERR_OR_NULL(saved_command_line)){
-		NVT_ERR("saved_command_line ERROR!\n");
-		ret = -ENOMEM;
-		goto err_driver;
-	} else {
-		if (strstr(saved_command_line,"tianma") != NULL) {
-			touch_vendor_id = TP_VENDOR_TIANMA;
-			NVT_LOG("TP info: [Vendor]tianma [IC]nt36672a\n");
-		} else if (strstr(saved_command_line,"shenchao") != NULL) {
-			touch_vendor_id = TP_VENDOR_EBBG;
-			NVT_LOG("TP info: [Vendor]shenchao [IC]nt36672a\n");
-		} else {
-			touch_vendor_id = TP_VENDOR_UNKNOW;
-			NVT_ERR("Unknow Touch\n");
-			ret = -ENODEV;
-			goto err_driver;
-		}
-	}
-
-	//Check android mode
-	if (strstr(saved_command_line, "androidboot.mode=charger") != NULL) {
-		NVT_LOG("androidboot.mode=charger, doesn't support touch in the charging mode!\n");
-		ret = -ENODEV;
-		goto err_driver;
-	}
+	touch_vendor_id = TP_VENDOR_TIANMA;
+	NVT_LOG("TP info: [Vendor]tianma [IC]nt36672a\n");
 #endif
 
 	//---add spi driver---