// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2021 Federico Amedeo Izzo <federico@izzo.pro>

// Switch eMMC Vccq from 3.3v regulator DCDC1 to 1.8v regulator ELDO1
// And enable HS200 mode.
// This DT overlay should be applied only after modifying the Pinephone
// Board by moving R615 to R614.

/dts-v1/;
/plugin/;
/ {
    compatible = "pine64,pinephone";
};

&mmc2 {
	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
	vqmmc-supply = <&reg_eldo1>;
	mmc-hs200-1_8v;
};

&pio {
	vcc-pc-supply = <&reg_eldo1>;
};